evinX
-
Posts
6854 -
Joined
-
Days Won
22
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by evinX
-
Nice supra, looks really good. But you have to take it with a pinch of salt, it is a tribute car and not a replica. Its a RHD Hardtop and the interior is totally different.
-
-
Im really wanting to like the A90 but i just cant. The back reminds me of that stick inset from kung fu panda for some odd reason
-
I got one. 25 delivered if you want it. Only changed as i got a trd one
-
Looks like a wicked idea and id of done it but my reverse cam is in my rear view mirror
-
Same was going to buy a load of oil filters as im out
-
Boot instructions label
-
Mine dosent make a noise, the bottom latches, the outer bolt casing kinda pushes into them and gives a tight fit, you flaps arnt down are they?
-
The will be a dull black plastic on the inside with a metal bracket where the bottom screw goes through
-
wanted Temperature gauge sender and rear speaker grilles.
evinX replied to Shane's topic in Parts Wanted
I have 2 speaker panels for sale with leather trim, 30 for both collected. The pass side has a crack but is covered by the leather. You could remove the leather trim if need be. Check my thread for pics -
Was that the front to rear line? Or the lines that actually split of to each rear wheel?
-
Is this captainchaos's old car? Looks familiar
-
Demisterman sells them on ebay. The heater core. 93 quid. Slightly smaller and less rows...14...produces ok heat but not as much as oem. Fair alternative as the oems discontinued. Id fit one when mine goes...
-
Didnt you post about this recently. And i uploaded a video just for you to show its the crank pulley?
-
Never touch metallic before clear coat. It disturbs the fleck. And always paint silver in a criss cross pattern. Silver is not a colour but a shade and is one of the worst to get right. Believe me once its gone tacky lay a light mist of clear on it. Then let it dry and go heavier. You will never get a nice shine with 1k aerosol clear coat.
-
They will never be a match for a TT6 aerotop. I remember the build well
-
Mintex here, priced well, brake well, no noises
-
Fuel lines passenger side, under car Infront rear passenger wheel under a long plastic cover
-
Isnt Kunifer supposed to be better than copper and never rusts/ easier to bend?
-
Halfords 199 silver is called toyota lucrene silver. Pretty damn close match to mine. I recommend using Proxl 2k clear in a can for a better finish. They do 200ml cans online. Halfords clear coat will dull over time and look crap after time.
-
Yea defo keep the engine. Unless you can afford to get an off the shelf engine fitted and by all means dont sell the old one and have it rebuilt later on. 2 engines. Cant go wrong. If you can afford to that is.
-
I want a trade card
-
Just under 2 weeks and they are usually with you ive found
-
Done it myself. Removed the hog rings with pliers and used cable ties to retie it down
-
Ive ordered Builthamber dynax S50, seems to have good reviews online, and Bilthambers products have all worked well so far for me with rust converting, removal etc
