Mk4Gaz
-
Posts
2451 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Mk4Gaz
-
Yes you're right mate, it is! I was tired last night [emoji23]
-
Not entirely sure, but genuine facelift rear spats have a cut out to clear the rear marker. These spats could be pfl?
-
Those rear markers are standard on facelift models.
-
Hi guys, does anyone have a good condition front subframe kicking around, that they will trade for a few haribos and shirt buttons? It's the steel one, not the main aluminium one I'm after. Mine is looking pretty sorry for itself [emoji22] Let me know if you can help [emoji1303]
-
22 is crank position sensor, or wiring 47 is sub throttle speed sensor or wiring.
-
Undo the nut, lift the arm away from the screen, and give it a wiggle. They pop straight off easy
-
There's a plethora of options on ebay, all different types of finish and head styles. M10 x 1.25
-
-
-
It's dead easy, just spray 3 light coats in succession, with about 5-10 minutes flash time between coats. No primer needed
-
If it's the original rubberised finish, you can strip it using acetone and a rag - it's laborious and messy, but it works. Then you can use black plastidip to repaint it, wilhich is an almost perfect oem pfl match. If your panel is facelift, you're out of luck, as there isn't really a product that matches very well.
-
Why can't you refurbish your original one?
-
for sale Genuine TRD 18" Alumi k wheels and tyres from a genuine trd car.
Mk4Gaz replied to keron's topic in Parts for Sale
Perfect supra wheels right there! -
Ok, so here's a couple of pictures of what I did. The bolt is spaced high enough to enable the shift knob to push down.....
-
-
-
-
Yes, white and black are both solid colour. All the others are clear coated [emoji106] Maybe with the exception of yellow, I can't remember if that's solid or clear over base?
-
If it's black, it won't be clear coated. Black is solid colour 202. Toyota paint is very soft (or at least used to be), so you might be better off using spray sealants and a very gentle buff. Gtechniq c2v3 is very good, and top up with autobrite project 64. I had mine coated with Williams sealant, and it washes lovely now. I just top it off with a diluted mix of Williams as a detailer, or project 64
-
I have two used sets, that were both good at bpu levels. I replaced them for brand new oem shortly after going big single
-
-
found Hubcentric wheel spacers & extended studs
Mk4Gaz replied to black_widow87's topic in Parts Wanted
All things being well and good, I should be removing mine next weekend. My new pcd adaptors arrived today [emoji106] -
found Hubcentric wheel spacers & extended studs
Mk4Gaz replied to black_widow87's topic in Parts Wanted
My 10mm spacers and extended studs should be available in a couple of weeks. I'll be removing them to fit my new wheels -
for sale Supra rocker panel, lh 7586019175,
Mk4Gaz replied to redsupratt6spd's topic in Parts for Sale
The sills are known as 'rockers' in the usa [emoji106] -
I'm interested in the small helper fan buddy. Mine fell apart a couple of years ago, and although I replaced it with an electric aftermarket jobbie, I'd kinda like the oem one there
