http://mkivsupras.co.uk/vbb/images/misc/quote_icon.png Originally Posted by dandan http://mkivsupras.co.uk/vbb/images/buttons/viewpost-right.pngNice project Mario - I'll be interested in what you think of the Kumhos. Great wheel choice Dan, I took her for a spin today to see if I wanted some adjustments on the allignment. It's 3 degrees down here but dry and didn't warmed the tires, lots of wheelspin in first and second gear and i'm just bpu. Maybe the tires need a warmer environment, or they just aren't that good. Well will check again when she is completely ready, the temperature will be higher too in a few weeks of time. I'll let you know.^^Yesterday it was around 18 degrees down here and tested again, did several pulls in 2nd and 3rd gear no wheelspin at all, I'm still using the A02B diff and the car allignment settings are shown below. The attachement shows the settings but is in Dutch. Noise from the tires when driving on the highway +/-60miles per hour is also acceptable.Will see what happens with the tires regarding wear as I have a little bit more camber on the rear then previous, hope they will survive at least 5000 miles.At the top from left to right:Frontaxle initial values final values Date Databank tolerancesTotal toe in/out Half toe in/out Max differenceCamber Max difference Caster Max difference KPI Angle Closed in Angle Rearaxle initial values final values Date Databank tolerancesTotal toe in/out Half toe in/out Max differenceCamber Max difference Allignment deviation Thrust angle Track width difference