Krimi Posted October 19, 2023 Share Posted October 19, 2023 Greeeeeeeat newssss 1 Quote Link to comment Share on other sites More sharing options...
HarleyFDMD Posted March 18 Share Posted March 18 Hey Peter, i had another read through this last night and noticed I've bought the same flywheel and clutch (i think) as what you have. How do you find it? Especially the flywheel.. is it super noisy? 1 Quote Link to comment Share on other sites More sharing options...
Peter P Posted March 19 Author Share Posted March 19 22 hours ago, HarleyFDMD said: Hey Peter, i had another read through this last night and noticed I've bought the same flywheel and clutch (i think) as what you have. How do you find it? Especially the flywheel.. is it super noisy? Morning Buddy. Nice, no, mine isn’t noisy. In fairness, the clutch is quite worn mate. I’m going for a brand new Spec Stage 3+ shortly, as we are finally fitting the Hypertune and single kit including the rather mighty Garrett G40-1150. Will be interesting to see how that drives being new and beefier than the current Stage 2+. But to answer your question, flywheel is quiet with no excess noise whatsoever. Who fitted yours mate? Was it new or used? Quote Link to comment Share on other sites More sharing options...
HarleyFDMD Posted March 19 Share Posted March 19 21 minutes ago, Peter P said: Morning Buddy. Nice, no, mine isn’t noisy. In fairness, the clutch is quite worn mate. I’m going for a brand new Spec Stage 3+ shortly, as we are finally fitting the Hypertune and single kit including the rather mighty Garrett G40-1150. Will be interesting to see how that drives being new and beefier than the current Stage 2+. But to answer your question, flywheel is quiet with no excess noise whatsoever. Who fitted yours mate? Was it new or used? Ok thats good to hear! I haven't fitted mine yet, it was just my expectation that the flywheel would be noisy with it not being a dual mass. Should have mine fitted at the weekend. Its all brand new, i have a stage 3+ clutch so I'll let you know what thats like! 1 Quote Link to comment Share on other sites More sharing options...
Peter P Posted March 19 Author Share Posted March 19 5 minutes ago, HarleyFDMD said: Ok thats good to hear! I haven't fitted mine yet, it was just my expectation that the flywheel would be noisy with it not being a dual mass. Should have mine fitted at the weekend. Its all brand new, i have a stage 3+ clutch so I'll let you know what thats like! Nice. Yes please, be good to get your feedback when it’s done mate. No noises though on mine, it was a tricky one to gauge as I went Tiptronic to V161 with the clutch that came with the box. Whilst a bit on the worn side, actual operation and noise wise it’s pretty much OEM. Think SRD were a bit worried when they saw the condition of the clutch, but they were surprised how well it drives. Think you’ll be happy mate. Good luck with the install. 1 Quote Link to comment Share on other sites More sharing options...
Peter P Posted May 4 Author Share Posted May 4 Afternoon All. So had a mammoth day yesterday driving across to Whifbitz to get the half cage and harnesses installed. Huge thanks to the guys for their hard work and effort, wasn’t as easy as I’d have liked, looks like the rear is slightly out possibly linked to the accident damage we found when we replaced the drivers side rear quarter. Meant a lot of elongated holes to get it to fit, but it worked in the end and I’m really happy with how it came out. Had a good wash and clean inside and out today, next up is the trip to SRD in a couple weeks to get the single fitted. Hoping they can send me some photos and updates I can share with you all. Till then, here’s a few photos of the cage and harnesses all fitted and looking rather tasty. Enjoy! 4 Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted May 4 Share Posted May 4 See told you the belts are a simple fit, looking good mate 1 Quote Link to comment Share on other sites More sharing options...
Peter P Posted May 4 Author Share Posted May 4 7 minutes ago, bradleyh_15 said: See told you the belts are a simple fit, looking good mate Indeed. Thanks mate, did put my mind at rest and the harnesses were actually the easy part in the end. Quote Link to comment Share on other sites More sharing options...
Peter P Posted May 5 Author Share Posted May 5 Morning all. Hope you’re having a nice day too. Forgot to grab a few photos of the new Pro Spec Imports carbon wing mirror covers. Snapped a few this morning before I set about cleaning the daily. These go over and around the stock mirrors, so easy to fit and they look surprisingly good. Very pleased and adds a nice touch. 7 Quote Link to comment Share on other sites More sharing options...
SupraAyf Posted May 6 Share Posted May 6 That's truly a fantastic looking Supra. Nice one Peter ;-) Andrew 1 Quote Link to comment Share on other sites More sharing options...
Peter P Posted May 7 Author Share Posted May 7 10 hours ago, SupraAyf said: That's truly a fantastic looking Supra. Nice one Peter Andrew Thanks Andrew. Much appreciated my friend. Less than a week to go now until I need to dig out the Hypertune intake manifold and drop it off with Lee and the team. Been waiting years for this, can’t wait to see it afterwards and drive it home. Stay tuned for more updates guys. 1 Quote Link to comment Share on other sites More sharing options...
Peter P Posted May 13 Author Share Posted May 13 Afternoon Folks. So next phase of my build is now officially underway. Dropped the car off at SRD this morning. Few before photos from Lee so hopefully I’ll get plenty more as they start the work to get the single setup installed. First job was whipping off the U.K. brake calipers which are off to BCS for refinishing as the OEM coating is awful and was coming off badly on the passenger front. Not going to spoil the surprise and say what colour they are going, I’ll post up some photos when they are back and reinstalled. Keep an eye on this for updates, now the fun really begins! Cheers all. 5 Quote Link to comment Share on other sites More sharing options...
Peter P Posted May 14 Author Share Posted May 14 Started to strip out the twins, looks like we have some blade damage on the front turbo. Not sure how or when that happened, but apparently not that unusual as Lee has seen them like this before and they still work fine. 1 Quote Link to comment Share on other sites More sharing options...
Peter P Posted May 15 Author Share Posted May 15 Had some more photos and updates from Lee/SRD. Strip down is going well and some new parts have been fitted including the Radium connections, GTR style coilpacks, new fuel pumps and hanger and they trial fitted the Hypertune intake manifold. Note all the carefully placed masking tape on delicate areas like the carbon pieces and the intake manifold to prevent any damage or scratches. Clearly taking a lot of time and care to fit everything which is nice to see. Love the difference between the original fuel hanger and single 255 pump versus the behemoth Radium hanger with dual 485 pumps. Considering it only went in on Monday I’m really pleased with the progress so far. More updates to follow. 3 Quote Link to comment Share on other sites More sharing options...
Peter P Posted Saturday at 09:27 AM Author Share Posted Saturday at 09:27 AM Morning All, Had some more photos and an update from Lee/SRD. The PHR power steering reservoir is fitted, so is the FluidAmpr crank pulley and the Radium fuel pump hanger and new pumps we saw in a previous photo. New battery also mounted in the boot. It’s all coming along nicely when you think it’s not even a week into the build. Huge thanks to Lee and the team for their efforts. Looking forward to seeing more updates soon. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.