Jump to content
The mkiv Supra Owners Club

robin

Club Members
  • Posts

    1021
  • Joined

Everything posted by robin

  1. robin

    fallout 3

    Try installing the latest patch. I think this was a known bug. Else maybe go back to an earlier save and try again.
  2. robin

    fallout 3

    So far all the DLC is for PC/360 only They have not ruled out new content for the ps3 but they also have not announced any either....
  3. You can bypass the loging into live bit to play by moving the anchorage.bsa files from the application data folders and into the program files, then on the launch window just add the files like any other mod. Then it works without the annoying sign into live stuff.
  4. robin

    fallout 3

    Level 20 is the highest you can get to so its best not to waste perks on things like "here and now" or the +10% experience one. There is meant to be an add on later that will increase the level cap to 30 and add more perks. Anyone played Operation Anchorage?
  5. robin

    fallout 3

    you can get the people in the tower to agree to let the ghouls stay. But when you leave and return a few days later all the people are dead/missing and it looks like the ghouls killed them all. :O
  6. I had some on the front for ahwile and found they were a bit slippy in the wet but no tramlining or anything...
  7. J spec or UK spec can be better or worse depending on your needs and requirements. If your lazy like me then the 80 litre tank is handy. As are things like the seat warmers for the cold mornings. Its also handy being able to put whatever fuel is cheapest in the tank without having to worry about high octane stuff. But then its a heavier car... and has dildos which I cant see anyone wanting.
  8. You could run multiple graphics cards but one would probably end up being an old PCI one unless you fancied a nice SLi setup or something. Another option is to get a splitter box, but then you will have two monitors with the same image...
  9. I am after a new standard toyota radiator cap. p/n: 16401-62100 Any of the traders able to supply this? All I seem to be able to find is uprated ones and toyota cant help till next weekend.
  10. Normally you can use a widesreen resolution but if you cant most monitors can either stretch to fit the image or you can just have a small black border at each end. I just bought a load of these 20" TFT's at work for £117: http://www.bechtle.co.uk/shop/MasterServlet;jsessionid=0a000b82bba8e82fef721ec4e2187968fe6b9cf3031?hybris_jakarta=0a000b82bba8e82fef721ec4e2187968fe6b9cf3031&i=lr2 Great image quality but only VGA input.
  11. 1) Ariel doesnt always go all the way down and sometimes leaves an inch or two sticking out. 2) Alloys have curb marks 3) Drivers floor mat is starting to wear. 4) Drivers seat is slighty worn.
  12. robin

    Part number

    What an awesome website. Thanks for going through and finding the part Merckz, ive just clicked through myself and thats exactly the bit he needs.
  13. robin

    Part number

    Can someone helpful with an EPC help me out with a part number? a friend of mine needs a new airflow meter for his 1991 Celica GT4 Model: E-ST185-BLMVZ Frame No: ST185-0000242 Any help would be greatly appreciated
  14. robin

    Ebay aux belts?

    I bought a non toyota one for about £30, been fine the last 10k miles and still looks new.
  15. Before checking the fluid level make sure the car is level and put the box in manual mode and work through all the gears including reverse. Then check.
  16. My 94 UK doesnt have the wiring and had a dummy unit fitted.
  17. I just had to replace my standard UK alarm as it was dying. Went with a Hornet Maxx 1 in the end. £199 fitted and its Cat 1. Nothing fancy, it locks/unlocks the doors, comes with anti hijack etc and the range on the fob is superb.
  18. If its just a drone then its likely road noise. With big wide tyres there’s a lot more noise. If its a bearing the noise changes as the load changes like monkey says. Try jacking the car up and rotaiting all the wheels by hand; If they feel rough or notch and the pads aren’t touching the disk then the bearings are likely to be at fault. If you can grasp the wheel and wobble it slightly then it’s very very dead but I think you would know about it if they were that bad.
  19. Car should have a new MOT on tuesday.
  20. I am selling my daily drive as I will be moving soon and taking the train to work so I wont be doing the milage to jusify two cars anymore. (I know I should keep this and sell the supra but I cant. ) The car is a 2002 Ford Focus Saloon in Neptune green metalic, Its the later TDCi 115 engine which is the quieter and more powerful version. It is also the Ghia with the chrome trim and all the extras such a climate control and traction control. Even in heavy traffic I cant get below 43mpg but with careful driving I can only seem to achive about 48mpg so its pretty good on fuel. Only 63.5k on the clock MOT until October - Will put it through a new one soon. Taxed until 31/05/2009 (was £120 for the year I think) Work completed on the vehicle in the last year includes: • 3 new wheel bearings + one new wheel hub. • New Clutch assembly + peddle • All new injectors and fuel pipes (cost over £1000) • All pads and disks changed • Laser aligned wheels • DVD MP3/WMA head unit with small TFT colour screen • Both front and rear tyres are almost brand new and decent brands. (Michelin and Dunlop I think.) • New AC condenser and O rings replaced along with re-gas oil and pressure test etc. • A self performed fully synthetic oil + filter change 5500 miles ago along with air filter etc. • New heated windscreen (awesome when its icey.) Bad things: Unfortunately I only have the service history from when I bought it. (Last year’s worth) I do have receipts for the above work excluding one of the wheel bearings which was done by the previous owner to MOT the car who never kept ANY receipts also I dont have receipts the work completed by myself. (Oil change etc) There are a couple of scratches on the boot and a small dent/scratch on the near side wing + mirror. I have tried to capture the damage in photos but they dont show up too well. Price: £2500 I have been offered this by one of those "webuyanycar" places but I would much rather sell it to somone here. Then complete a 100 mile round trip only for them to shift it on at an inflated price. http://visualplanet.org/files/02.jpg http://visualplanet.org/files/03.jpg http://visualplanet.org/files/05.jpg http://visualplanet.org/files/06.jpg http://visualplanet.org/files/07.jpg http://visualplanet.org/files/08.jpg http://visualplanet.org/files/09.jpg http://visualplanet.org/files/10.jpg http://visualplanet.org/files/11.jpg http://visualplanet.org/files/12.jpg http://visualplanet.org/files/13.jpg http://visualplanet.org/files/14.jpg http://visualplanet.org/files/15.jpg http://visualplanet.org/files/16.jpg http://visualplanet.org/files/17.jpg http://visualplanet.org/files/18.jpg http://visualplanet.org/files/19.jpg http://visualplanet.org/files/20.jpg http://visualplanet.org/files/23.jpg
  21. It will say on the V5 if the mark is transferable or not.
  22. I cant be sure how many miles but i suspect 100k+ It worked fine when removed but the bearing is noisy and it would ideally need a new bearing before fitting. £10+ postage??
  23. I have a used working one with a noisy bearing. Needs a refurb really.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.