Delboy52
-
Posts
1474 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Delboy52
-
Do you need a pair of facelift inserts to trial with?
-
-
Didn't expect that! My idea was to replace plastic lenses with glass one also. Looks like this modification would require a bit more than expected.. Maybe facelift inserts could fit inside UK spec clusters.
-
Anyone have some good condition glass headlight lenses they'd like to sell?
-
These came off my car recently and are for sale. Driver and passenger side, in satin black (need respraying). They looks to be in good condition aside from some wear which I'll list: Passenger side is missing the lower mounting bracket Passenger side plastic around the screw holes chipped away partially Driver and passenger side have had a repair before my ownership in the same places. Driver side minor crack on the underside. Looking for about £80. £60
-
I have a pair of front arch panels spare.
-
A belt sander would've been bliss . I remember you saying your wheels tapered in the opposite direction to mine, widening closer to the hub contact surface rather than the inside opening of the barrel. These callipers do have very high shoulders so if that opening is too narrow, it is new wheel time. Bummer.
-
They do fit under an 18" if persuaded..
-
Interested in a polished facelift set of 6 rings for sure
-
Mine will be on the sorn list of shame for this month. Then a spa day at the Lexus dealership to give my V8 a good going over, followed by an ecu debug pampering of a few niggly errors a soldering iron should sort. Then onto the next outrageous expense of some designer custom wheels.
-
J3 Bell housing for a TT. Have a torque convertor also if needed.
-
I have a TT bell housing available. Thanks David
-
I have a set.
-
The fuel and temp were ok, they stayed in place (take a before photo). The tacho and spedometer drop further than the stops with no needles so have to put them back on whilst the car is running. Tacho goes on at your normal idle, spedometer is more tricky needing a gps for speed and putting the needle back on whilst in motion. Passenger can do it on a nice long straight ideally.
-
I've been experimenting with EL panels. They can be retro fitted to any OE style backlit face design. They hate being dimmed though.
-
My son might be legal to drive by the time I finish the Supra Have alomst the same Recaro seat, not the Hero version though. I have the Recaro seat pad underneath so my seats don't get indentations under the weight. Bubble Bum travel booster seats fit perfectly into the back bench recesses btw.
-
They are 25mm wider each side at the rear. If you want wider, it'll be Ridox or custom. Mine is recently back from Grams with arches fitted. Body shop is yet to finish them off.
-
Pm'd
-
Replied
-
I've got a driver's side one, the passenger side was a bit too far gone to hold onto.
-
JackyBoi, sorry I can't help with your A03b search, but if your broken diff becomes spare once you've found a replacement I could make use of it for parts to repair my A01b. Am not that far from you so could collect it.
-
AeroKit.eu -
All the black analogue speed sensors (89411-50010) that go on the side of the gearboxes are swappable between NA, TT, even the Lexus A650 5 speed gearbox I had uses the same ones. The no.2 digital sensor with the gear is the primary speedometer sensor TT (33482-59025), NA (33482-39415). Difference is the gear on the end that just slides out of the housing. Think I have all that right, and as David says I have a box full of gearbox spares as I had a year of "burning" through gearboxes. Attached the speed sensor test page.
-
Does anyone have any need of these? Am sick of tripping over them every time I get the lawnmower out..
-
I drive this boat more than the car I spend all my money on so decided to get a tramp stamp for it
