Big Mark

Just found it in my garage and it's the bonnet one I have, not the scuttle one I'm afraid.

I might do. I can't remember if it was this rubber or the one on the edge of the bonnet that I couldn't find when the car was stripped so bought a new one, then found the missing one a few weeks later.

Luc, you copied an old list, but it's OK, I added you before I added myself 1. Blythmrk x2 2. charlton x2 3. MrGRT 4. Supra-love x4 5. Mwilkinson x 2 6. samdale 7. Hamilton 8. Sheefa 9. ShawnPreece x 3 10. Kev.O 11. RobUk 12. djmakz x2 13. Fitz x2^ 14. Mellonman 15. ripped_fear 16. Noz 17. Style 18. Drift_bear x2 19. PJJ 20. Bayside_supra 21. WayneW 22. Mike2JZ 23. Chris Bailey 24. Delboy52 25. Fastphil666 26. Tayr 27. Timlowthian 28. Wheelynutz 29. Spunkmeyer 30. Foggy147 31. Raddys (x2) 32. Pf85 33. Ian ian x 2 34. Nathanj1142 (x3) 35. Axl x1 36. LuxLuc x2 37. Big Mark

I need a pair of front sensors apparently as Whifbtiz couldn't get my traction control working as had no signal from either. So if someone knows a sensor that would fit, regardless of the wiring, I'd be interested. Changing the wiring/sensor is no biggie.

No idea on compressor, but Denso make the condenser (and drier) but don't sell them in the UK. I was lucky as got a mate working in America to bring the Denso parts back to UK for me.

They're only a simple 3D printed part with an insert. Not complicated at all. If I was desperate for a set I'd bang out the CAD and print off a set on a mates or work printer.

I died mine on my first Supra. Piece of cake and came up amazing. Take it out the car. Give it a good wash/scrub and leave dry. Spray on the black carpet die and agitate it in with a scrubbing brush so that it penetrates properly rather than sitting on surface. Allow to dry. Then give it a 2nd coat agitating again. Then leave outside to dry fully. Mine stayed looking great all the time I had the car.

TRD Carbon Blade (no side supports etc) Clamshell at rear edge had separated so repaired with black sealant and a couple of marks on lacquer on that edge. Was on my car for a few years like this, you won't spot issue unless you go looking for it. [ATTACH=CONFIG]232460[/ATTACH] [ATTACH=CONFIG]232461[/ATTACH] [ATTACH=CONFIG]232462[/ATTACH] [ATTACH=CONFIG]232463[/ATTACH] [ATTACH=CONFIG]232464[/ATTACH] Collection Only - £100 Collected from Banbury.

Never seen one of these before. Where did you get it from and do they sell any other unusual carbon fibre parts?

Is this every Monday - Wednesday, or just this week? I work at Silverstone, but off this week, plus Supra at Whifbitz at present, might be back for next week tho. - - - Updated - - - Is this every Monday - Wednesday, or just this week? I work at Silverstone, but off this week, plus Supra at Whifbitz at present, might be back for next week tho.

Just a thought, but can't you roll the rear arches so that the brakes fit? Seems a shame to sell them.

And where does the actual light units sit? Is there a place for them to clip on, or is it just a case of stocking them on with double sided somewhere?

Hi Noz, Available now. https://www.srdtuning.com/product/srd-bonnet-lifter-set/?fbclid=IwAR37IpsT-o9PJH_qE70gIfsf2mqxDKs5ICV9nIqJk74FYlWsVyhudd33_iU

Where do these connect to?

Next batch on it's way to SRD shortly for anyone that needs a set. Available as a complete kit with struts or just the brackets on their own.

I doubt this was an option on Supras. Heated windscreens tech is owned by Ford.

Ah, I didn't use the spare hole on the 1st PCB, I just split the wire from the foglight switch into 2 and sent one to each PCB. Maybe that's why my warning light comes on the dash if I have the rear foglight on and touch the brake pedal?

My car was set up by Centre Gravity too. Made a big difference

Exactly Ric, my camera will connect to the Double Din stereo once I get around to fitting it. Overall a nice neat solution.

I have one that looks like this: https://www.ebay.co.uk/itm/HD-Waterproof-170-Car-Reverse-Backup-Night-Vision-Camera-Rear-View-Park-Cam-TR/132692326153?hash=item1ee5143709:g:NjIAAOSwCMFaPT2b And I fitted it where the centre screw was for the number plate light. Fits perfectly and you can't even notice there is a camera there.

Every day is a school day, I never knew there were 2 types. At least I now know mine is the TT version.

ALL SOLD. If anyone else wants a set of my brackets these are now stocked/sold by SRD Tuning exclusively! https://www.srdtuning.com/product/srd-bonnet-lifter-set/?fbclid=IwAR37IpsT-o9PJH_qE70gIfsf2mqxDKs5ICV9nIqJk74FYlWsVyhudd33_iU https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2Fleesrd%2Fposts%2F1919475004755310

Got just 1 set left here at mine in need of a new home................