Big Mark

I totally missed this entire post. Pity that Club Vehicle passes have sold out as Silverstone is just up the road from me, plus after many years as a project my car should be finished in time for it. Oh well.

Carbon sill trims. (New, never fitted) (£180) Bought from Charge Styling, but never fitted. Decided I’m definitely sticking with the stock plastic sill trims so am selling this. These require bonding/sticking on. Injector Dynamics 1000cc 60mm x 14mm x 14mm Fuel Injectors. (£SOLD) PHR turbo oil return pipe. (£SOLD) Mishimoto Carbon Fibre oil catch can with Vent. (£SOLD) Mk4 Supra SMIC Duct. (£SOLD) AEM Fuel Pressure Regulator body. (£SOLD) 3.7 small case auto LSD diff (£SOLD)

After building my project car for a number of years and just one 60 mile journey the decision was made to remove the entire DCT conversion and go in a different direction. Therefor pretty much an entire DCT conversion using an E9x gearbox is for sale. E9x to 2JZ DCT gearbox adaptor kit. Billet gearbox to engine adaptor plate to suit the BMW M3 E9x DCT gearbox. Billet Flywheel and flywheel adaptor to attach to the gearbox . E9x to Mk4 Supra rear mounting kit and flange. Billet propshaft adaptor to fit auto propshafts only, this will not fit a 6 speed propshaft as its longer. Billet gearbox mount. E9x DCT to Syvecs wiring harness. Need to go to a Syvecs S6+ or S7+ E9x DCT GEARBOX BILLET OIL COOLER ADAPTOR + BMW OEM Cooler outlet (You choose which you wish to use) BMW DCT Drivelogic Button Switch 7835039. Mounted a dash blanking (Tho has come from a painted dash) BMW DCT Transmission Gear Shifter 7842102. Dodson Motorpsoort BMW DCT Sportsman 900Nm clutch kit Installed in a E9x DCT box and only then done 60 miles before the box was removed from car). E9x DCT gearbox*** Gearbox included for FREE for reasons below I had the Dodson clutch kit installed in the box by Whifbitz when I bought the clutch kit. Occasional drip from where the cooler adaptor mount area apparently. Gearbox was working, but recently the cars cambus had issues and the gearbox got confused. Most likely due to the sketchy wiring of a certain tuner on my car than any issue with the box itself. Location: The gearbox, fitted with the clutch kit , billet cooler adaptor and rear mounting kit, plus Drivelogic button are all currently in Haywards Heath at SRD. All the other parts are currently in Oxfordshire with me. Price: £SOLD

1. mark blythe x1 2. Ellis x3 (collect NEC) 3. Suprakeith x1 4. Ian & Jackie x3 ( can we collect from NEC?) 5. mwilkinson X2 6. Bradh_15 7. Peter P x1 8. Wile e coyote x2 (collect NEC) 9. tayr (please add haribo) 10. Hamilton x1 11. Gaz B x2 12. Madbull2255 13. Soopra 14. scottyt 15. m12aak x1 16. BOB B x2. 17. 96sz 18. Big Mark x 1

I switched to the NA reservoir when I went to an aftermarket inlet, but the return hose spigot clashed slightly with the manifold, so I had the reservoir modified. Just something to be aware incase in case you get the same issue.

I've got a Scorpion tracker fitted to mine. I had the car transported this week this week and I got a call from Scorpion within minutes as it detected a possible theft. i.e. the car was moving without the engine being on. Plus I can use the app to see a google maps showing exactly where the car is at anytime.

Black supra by Hanwell Field shops in Banbury at 1pm today?

Download it here: https://magnetdl.abcproxy.org/file/5219300/car.sos.s10e06.toyota.supra.mk4.1080p.hdtv.x264-skorpion/ I watched it yesterday. TBH it wasn't a great episode.

Computer generated as there's no reflection of the person filming.

Personally I absolutely can't stand Max. Ignoring that he looks the love child of Hitler and a rat, and is the ultimate sulky spoilt whiny little brat (closely followed by Christian Horner), he's also a dirty driver that would rather run himself and anyone else off the road in corners rather than be overtaken. I reckon next weekend in the final race there's more chance of him taking Lewis out than of them both finishing the race. Lewis needs to get pole, preferably with Bottas in P2, get through the first corner without being speared by Max and put a lot of space betwee him and Max for the entire race. Or plan b) Bottas to give Max a taste of his own medicine, not yield and take him out...... And then sit back and watch Max have abslute melt down of a tantrum.

1. blythmrk x2 2. Ellis x3 3. Supra-Love x4 4. Mwilkinson x 2 5. Soopra x1 6. Big Mark x 1

No idea on costs as I wasn't keeping a track of my time and I can't remember the printing cost, but it was mates rates. Tho the lower cowl was almost a 36 hour print. Plus it was a fraction too tall for his Prusa so I moddelled a joint into it so it could be printed in 2 parts and then seamlessly joined.

A friend tried to scan them but software was rubbish, so I just measured carefully and used 2d prints of my sketches to make sure everything was aligned to the originals where necessary.

Lower cowl to fit around my paddle shift and still work with OEM upper cowl designed and 3d printed, Started sanding it smooth and gave it a few coats of primer. Then the other week I modelled the upper as mine was missing some of the locating tangs. I noticed during the trial fit that as I'm trying to use the standard screw holes into the upper cowl they're compromising the clearance between the cowls and rear of the steering wheel. So as I have both modelled now I'm going to modify both models this month so that I don't have to compromise and then 3d print them both.

I have 3.5" downpipe and midpipes from TB on a shelf here to fit one day. Quality is outstanding.

It's not worth the effort, I've asked Keron if he can pull one from any of the cars he's breaking.

I could model and 3D print one myself, but it's not an ideal part to 3D print.

Thanks, but I wouldn't trust that website as far as I could throw it. There's a lot of website pretending to be European but are instead chinese scams as I found out just last month. https://uk.trustpilot.com/review/slaoskill.com

Does anyone have one of the white clips that hold the rear of the headlining panel in place as they're discontinued by Toyota?

I was just about to ask the same question.

I've not received any PM about payment

1. Blythmrk x2 2. mwilkinson x2 3. Jackie Silver x 6 4. Ellis x3 5. 96sz 6. Mo Reviews x3 7. Josh42 x2 8. Luxluc x2 9. Wile e coyote x2 10. Soopra 11. Tayr 12. Griffsplace 13. Supra-Love 14. KamaSupra x2 15. MrGtr 16. Supra_scott 17. PJJ 18. Madbull2255 x2 19. Bradleyh_15 20. Max5437 x5 21. m12aak 22. Inazone x2 23. Peter P 24. ben_harmer32 25. Supragal 26. Eddie-s x2 27. mellonman 28. charlton 29. Delboy52 30. Crossy x 2 31. juanchan 32. Darren M 33. Mike33 34. pf85 35. WayneW x2 36. MattDavies 37. Hamilton 38. ARPUS x2. 39. Pudsey. 40. samdale 41. Hamzahkhan 42. Style 43. DannoSupra 44. Big Mark

This is a well known coming problem. I drilled a couple of large holes in the bottom of each upright so that any water can drain out.

I remember reading something about a way to retension them. I've got a spare set sat on the floor here that I keep meaning to open up and retension one day.............. https://www.supraforums.com/threads/finally-writeup-on-how-to-fix-sagging-seat-belts.532699/ https://old.mkivsupra.net/vbb/showthread.php?349336-Seatbelt-repair-Video&highlight=seat+belts