ballsdeep

Thanks but I have access to o-rings and c-clips in work but would like exact sizes to compare against.

also the size of the c-clip would be helpful?

For anyone piecing together there own kit don't presume 4AN fittings will fit 4AN braided teflon hose because it won't! Lesson learnt! My understanding of it is teflon hose needs teflon fittings and nitrile rubber hose needs the normal AN fittings?

Been looking at those ones today, will get one ordered now! Thanks

Here's my list so far.. Hope it helps? Iv been very luck and found some little gems on eBay and off here. Xs t4 manifold £195 T61 turbo t4 3" v-band £350 Wastegate £75 Fmic £65 deliverd Intercooler Piping 3" £78 Screamer pipe £25 4" Downpipe + mid pipe £245 Oil cooler £40 Aem boost gauge/controller £140(used) Aem afr gauge £100 Bov saqv £40 4 runner dizzy £30 Oil filter sandwich plate £10 Walbro 255 fuel pump £55 thermostatic oil sandwich plate £55 Depo Oil temp and pressure gauges £100 Oil return/feed pipe inc fittings £40 used (braided hose needs replacing) Ecu Extension harness £50 Emange ultimate ecu £230 Parts I still need: Ecu harness £82 3bar map sensor £60ish 4an Oil feed flange £15 10an braided hose £? Boost hose £? 4" intake £? Fmic brackets top 115mm / bottom 175mm 90degree 2.5- 3" No2 ignition lead £12 Heat wrap £20 Turbo shield £40 Mapping session £270

one of many things I'm still puzzled by!

Looking good mate! did you remove engine and gearbox together, and What clutch did you go for..?

Decided to live with it for now but if anyone has these gauges and remembers how to wire them up I'd really appreciate your help!

Can anyone tell me how they wired there depo gauges real quick while I'm sat in the car..? I used the clock loom: Clock wires / Depo wires Green/orange. - white Red. - Orange Blue/red. - Red White/black. - Black Gauges only work with the lights switched on, they are supposed to be lit up blue then when the lights are switched on they turn red? Thanks

Haha think this will be my route temporarily..? I have exedy with fidanza flywheel

No problem mate, just trying to help. This thread has been brilliant! I would have bottled it along time ago if it wasn't for everyone's advice! I would like abit of information on clutches thought.. What's everyone using? I have a fidanza lightweight flywheel that i would prefer to keep if possible?

No there not cheap! They have doubled in price foe the aem extension £200+ but I did find this yesterday: http://www.tuningdevelopments.co.uk/index.php?cPath=502_521_600 Field extension harness £159

So when are you selling me your EMU then Did you get the v-band clamp I sent you?

Noz are you having problems with your EMU or are you regretting using it because your power hungry? Would it be suitable for lower power like 350-400?

Couldn't resist at that price! I love a good bargain, I have just bought a patch extension for my ecu for $70 but its missing this bit: I'm not sure if it will affect the connection but is well worth the gamble at that price!

Me please I will pm you soon!!

I have a drivers side pre-facelift insert and a passenger side facelift insert you can have to Play with.. but no housing or lenses I'm afraid noz!

brilliant, only took me 3-4 hrs to wire up my gauges.. guess I need to MTFU then! Saves me £90

Also I will be doing all of the work myself apart from the wiring for the e-manage ultimate. so what I'm wondering is will I be able to drive it using the stock ecu? Obviously Only to get to my mapper about 15miles away?

The only problem I have with that site is half the pictures don't work!! I bought this: It was described as a toyota soarer return line for a t61 so I took a gamble but the hose itself is only about 8" 9" long.. The flanges and fittings all look ok so I'm just going to replace the hose but Haven't found the answer yet.. I will be using xs mani Cheers

its working now mate, im using it to try and find the exact lenght of hose i will need for the oil return and feed..

I seen it dude but wanted to use my engine since its only done 66k. But it makes sense to be able to test fit everything before swapping engines. Oh well My loss

You don't realise how much you want something until its gone.. i missed out on Josh's engine so I now have the hunger for a nice cheap engine to play with! Any of you na-t boys got one lying around..? Anything upto 80k

Cheers pal pm'd

Must resist!!! I'm so tempted but funds are tight at the minute, out of interest How's the rear crank seal? Mines leaking oil!