Krister
-
Posts
561 -
Joined
-
Days Won
1
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Krister
-
sold Tein HA Coilovers with OEM Mounts and Insulators
Krister replied to dandan's topic in Parts for Sale
Wow those are in rough condition outside -
Can anyone comment how low these rails sit with a seat installed compared to the stock seats? I have the Bride MO on my other Supra and they sit very low with the Recaro Speeds, which I need as I'm 190cm tall.
-
Anybody fitted their spoilers? Mine is twisted and the left side sits about 1cm higher than the right side. I'm not very happy. I ordered three and they are all the same. Visually they look great quality but fitment is off. They are so rigid that it's not possible to bend them back.
-
I had a valve in my Soarer. It was around 102db without the valve and 93db with the valve closed, just to get under the 94db limit on track days and the open the valve when I went to the track Couldnt boost with the valve closed over 1 bar, there was too much back pressure in the exhaust that way.
-
Great set of coilovers. They dont have stiffness adjustability but they were perfect as they were. Had to change mine out for some Tein Flex's because the H&R's started leaking. But I actually preferred the H&R's more.
-
What do you mean by fuelcutch? Stock MAP sensor is good for only 18 psi, after that it doesnt measure the boost any more and you hav a risk to lean out the mixture. Do you have a wideband Air fuel ratio gauge?
-
I'd run the stock engine up to 700hp without any problems, I ran mine at 800hp for two years beating it up regulary. I think the problem is with the 720cc injectors and stock JZS147 ECU. You need to have a proper stand alone ECU like AEM EMS, HKS Fcon V-Pro etc.. Also what do you mean the car runs heavy? If you cant get more boost than 10 psi on the first two gears, it might be that the turbo is just too big, you have a boost leak or your boost controller is faulty.
-
OK, I'm in.
-
1- mitchell9006 2- gjp 3- JimC 4- Al Massey 5. Krister (depending on shipping price)
-
Double post
-
I might be interested at £90 mate. How much for postage to Finland?
-
Selling my car to a guy in Sweden - export advice please!
Krister replied to Crazybassist's topic in Supra Chat
Same thing here in Finland, we need the VIN etc to get the car insured for the home back. Insurance is targeted on the car, not a person. -
Come to Finland next year. We have mile events usually four to six times a year. No noise limits or safety equipment needed.
-
This Setup a video conference so I can attend from over here.
-
What exhaust housing blanket and wrap is that?
-
What exact tyres are you running? Can you post a link?
-
Clutch is mine
-
---
-
As the title says.. I'm after for an used Apexi N1 or Gt-Spec exhaust for the MKIV.. PM me if you have one..
-
Any pics of the brake shute setup? Did Jamie take this? very interested..
-
Bumping an old thread.. Anybody know if the software for the Silver F-Con V is available? And just to be specific.. I'm talking about the OLD Silver version, not the Gold one. There is a Jap language software floating around for the gold version, but it doesnt work on the silver one.
-
Some of my friends have ordered stuff from there and got what they ordered. Is the item in stock? Then I'd propably order it but if it's some special order stuff, I might reconsider.
-
3 September in Lappeenranta airport Finland No noise limits here..
-
I might have a need for a 2JZ-GTE engine. Preferable with all the anchillaries etc, but doesnt need to have the loom. I would have the engine picked up, but it would need to be on a pallet. PM me if you have one available.
-
..and how about that wasp inside the cabin?