Jump to content
The mkiv Supra Owners Club

BOB B

Club Members
  • Posts

    1421
  • Joined

Everything posted by BOB B

  1. 1) Graham1984 2) KamaSupra 3) MattDavies 4) Budz86 - Eastbourne 5) Sabrina 6) Fitz 7) Abz - London 8) supraleeturbo 9) clay 10) Big Supes - Southampton 11) gdog1989 12) JamieP 13) Ben sz-r 14) mk4Gaz (Gary) Southend on Sea 15) steve.m 16) tt paul Portsmouth 17) Steve Paine (Kent) 18) james_cbr (dorset ) 19) Chris Bailey/jcbt (Essex) 20) Suprasurrey 21) kayjay0_7 (Kelvin) - Barkingside 22) Ripped_fear (southampton) 23) Andrew K 24) GreaseMonkey 25) BOB B (Southampton/Portsmouth
  2. Right Matt, washer T90210-07001 X16, and I paid £2.38ea
  3. Hi Matt, I'm sure I have the number, it may take me a minute to find it, yes the Torque is pretty low and there is a set order in which to to do them.
  4. Just use a small screwdriver to pop them off/loose, they are special washers that have to be renewed when putting the covers back on, once they have been torqued down there is a plastic part that moulds into the thread a bit, makes them a bit difficult to get off. Or just try turning them off by hand.
  5. Oh....My......God!!!! Wow, that's going to cost, if it is produced, and looks anything like that, I'll be looking to get a second hand one in about 15 years time. Or I may just sell our house.
  6. Are you sure the hand brake pads are not in contact/adjusted properly on the inside of the disc?
  7. Got my calenders yesterday, great job, thay look good, a big thanks to Andrew and Steve and anyone else involved, it is a shame that more club members don't subscride to this.
  8. 3G do them, I used to have them fitted with no issues, that was with "normal" driving though.
  9. 1. DodgyRog 2. Buster 3. james_cbr 4. Listy 5. ripped_fear 6. slow8dirty 7. BOB B I'm in, it was good fun last time, it couldn't possibly have been that long ago.
  10. I don't know much about TTC mode but I had the same problems as you have just described, does yours sound noisy and then blow when the second is supposed to come on? On your first picture, yes that is the EGCV actuator but the arm of that connects to the actual EGCV which is between the the turbo's and your exhaust pipe, in the end I managed to get a second hand valve and changed them over (a pain in the arse job) but it did solve the problem, this was 3 or 4 years ago.
  11. Oh My God ! I would struggle on that road at 5 MPH, great vid, shame it's not longer.
  12. Always very sad to hear that someone has lost their life in a car crash, but it sure brings it home when it's a very similar car to what we're all driving. Just very sorry for those who are left to deal with this. R I P.
  13. Homer, does it still make the same sound from a cold start? ie like when it's been sat over night, then after a few minuets, once warm, you don't hear it again till the next cold start? I thought that, if it was the big end you would hear it all the time.
  14. Sell it at the end of May H, do one last Dragonball, it would probably sell better at that time of year too
  15. Ashford Travelodge all booked, double room £29.50. As Ian says "woot woot", here we go.
  16. That engine and engine bay look fantastic.
  17. It's looking good, I've checked time off and its all go, we need them to distroy all the wasps though.
  18. Can anyone recommend any good sprayers anywhere along the south coast the nearer to Portsmouth/Southampton the better, its hard getting a good place that you don't have to travel miles to visit.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.