steve spedd Posted December 10, 2010 Share Posted December 10, 2010 Notice you dont have a catch tank, are these not really needed? Quote Link to comment Share on other sites More sharing options...
MarkR Posted December 10, 2010 Share Posted December 10, 2010 Very nice - I know where you got the idea for the water injection bottle from Quote Link to comment Share on other sites More sharing options...
stuart hydzik Posted January 3, 2011 Share Posted January 3, 2011 Stunning looking car !!! You are just a bit ahead of me with your build ,I bet you can't wait to drive it ,I'm iching to get in mine . Good luck at the dyno! Quote Link to comment Share on other sites More sharing options...
JamieP Posted January 11, 2011 Share Posted January 11, 2011 Has it been mapped yet mate? Just looking through the pictures Andy and it looks like you have a 4" downpipe/midpipe, then you have a 3" reducer? and back up to a 4" system, that cant be good for flow. Quote Link to comment Share on other sites More sharing options...
Jurgen-Jm-Imports Posted January 11, 2011 Share Posted January 11, 2011 Has it been mapped yet mate? Just looking through the pictures Andy and it looks like you have a 4" downpipe/midpipe, then you have a 3" reducer? and back up to a 4" system, that cant be good for flow. ryan has car now and it will be mapped soon,. am not sure on sizes for exhaust etc, andy and dusty sorted them out. i have some new pics from today will upload in a sec Quote Link to comment Share on other sites More sharing options...
Jurgen-Jm-Imports Posted January 11, 2011 Share Posted January 11, 2011 from today new pics - we still need to finsih few things off. Quote Link to comment Share on other sites More sharing options...
JamieP Posted January 11, 2011 Share Posted January 11, 2011 Looks lovely, he will need a 1000bhp to carry round all them speakers and amps:d You can see the 3" reducer in this picture, just seems odd the have that in the middle of a 4" system. http://i115.photobucket.com/albums/n297/Jm-Imports/PROJECT%20800/P1020074.jpg Quote Link to comment Share on other sites More sharing options...
Jurgen-Jm-Imports Posted January 11, 2011 Share Posted January 11, 2011 more pics.. once its back here we will give it a nice clean , finish of a few things and do a new thread with finished pics.. Quote Link to comment Share on other sites More sharing options...
Jurgen-Jm-Imports Posted January 11, 2011 Share Posted January 11, 2011 Looks lovely, he will need a 1000bhp to carry round all them speakers and amps:d You can see the 3" reducer in this picture, just seems odd the have that in the middle of a 4" system. http://i115.photobucket.com/albums/n297/Jm-Imports/PROJECT%20800/P1020074.jpg am pretty sure its a 3.5 inch boost logic adapter but andy knows more about this system.. also we have another exhaust system like andys in stock for sale... Quote Link to comment Share on other sites More sharing options...
Jurgen-Jm-Imports Posted January 11, 2011 Share Posted January 11, 2011 we are also fitting a new shiney rad pipe ;-) when it comes back Quote Link to comment Share on other sites More sharing options...
suprafan72 Posted January 11, 2011 Author Share Posted January 11, 2011 Looks lovely, he will need a 1000bhp to carry round all them speakers and amps:d You can see the 3" reducer in this picture, just seems odd the have that in the middle of a 4" system. http://i115.photobucket.com/albums/n297/Jm-Imports/PROJECT%20800/P1020074.jpg I know what your saying...its 3.5 reducer...I am concerned about flow.. see when it starts to become an issue on the dyno.. and think about the next steps then... Quote Link to comment Share on other sites More sharing options...
JamieP Posted January 11, 2011 Share Posted January 11, 2011 I know what your saying...its 3.5 reducer...I am concerned about flow.. see when it starts to become an issue on the dyno.. and think about the next steps then... Boostlogic only make the one reducer mate and its 3" unless it was custom made. http://www.boostlogic.com/xcart/product.php?productid=83&cat=6&page=1 Id get rid of it and just weld a 4" vband flange on the end of your midpipe, keep the full 4". Quote Link to comment Share on other sites More sharing options...
suprafan72 Posted January 11, 2011 Author Share Posted January 11, 2011 Re the ID2000cc Injectors, Spoke to Ryan...Fun and games with the idle and running up to 1,500rpm... Can't get it running like stock I'm afriad..... Jamie, I think you'll have the same Issue Quote Link to comment Share on other sites More sharing options...
JamieP Posted January 11, 2011 Share Posted January 11, 2011 Re the ID2000cc Injectors, Spoke to Ryan...Fun and games with the idle and running up to 1,500rpm... Can't get it running like stock I'm afriad..... Jamie, I think you'll have the same Issue Yeah i was worried about that, might try a set of the bosch 1600cc ones if the ID's turn out to be a pain. Quote Link to comment Share on other sites More sharing options...
suprafan72 Posted January 11, 2011 Author Share Posted January 11, 2011 Boostlogic only make the one reducer mate and its 3" unless it was custom made. http://www.boostlogic.com/xcart/product.php?productid=83&cat=6&page=1 Id get rid of it and just weld a 4" vband flange on the end of your midpipe, keep the full 4". Car is with Ryan now, I'll have a chat with him and see if its something he could get done whilst he has the car Quote Link to comment Share on other sites More sharing options...
hodge Posted January 13, 2011 Share Posted January 13, 2011 Big dyno day today Andy ???? Quote Link to comment Share on other sites More sharing options...
Jurgen-Jm-Imports Posted January 13, 2011 Share Posted January 13, 2011 next thurs i think Quote Link to comment Share on other sites More sharing options...
hodge Posted January 13, 2011 Share Posted January 13, 2011 Ahh my bad lol. Was talking to Andy last night about a few thinks. Thought he said it was this week. So we've got another full week to wait to see what it makes :-( Quote Link to comment Share on other sites More sharing options...
Jurgen-Jm-Imports Posted January 13, 2011 Share Posted January 13, 2011 Ahh my bad lol. Was talking to Andy last night about a few thinks. Thought he said it was this week. So we've got another full week to wait to see what it makes :-( fingers crossed she makes good power and reliable Quote Link to comment Share on other sites More sharing options...
hodge Posted January 13, 2011 Share Posted January 13, 2011 Should be ok. It cane with a built engine anyways, and all the parts used are good quality. I can't see it Won't see good numbers. Quote Link to comment Share on other sites More sharing options...
suprafan72 Posted January 13, 2011 Author Share Posted January 13, 2011 Yep its next Thursday at TDI.... No point in SRR as there is a slight issue with my rear being too low and besides on R888's it will probably slip on the DYNO... As soon as I get numbers i will shout out.. Quote Link to comment Share on other sites More sharing options...
suprafan72 Posted January 13, 2011 Author Share Posted January 13, 2011 Im deffo sure it would beat Jamesy in the worst fuel consumption ever with the ID2000's and Three fuel pumps on the Job...It used over 100 quid to get back to Oxford from Newcastle on cruise Quote Link to comment Share on other sites More sharing options...
JamieP Posted January 13, 2011 Share Posted January 13, 2011 You are putting me right off these id2000's. Quote Link to comment Share on other sites More sharing options...
Jurgen-Jm-Imports Posted January 13, 2011 Share Posted January 13, 2011 Im deffo sure it would beat Jamesy in the worst fuel consumption ever with the ID2000's and Three fuel pumps on the Job...It used over 100 quid to get back to Oxford from Newcastle on cruise hope the weather is nice for the drive back ;-) but i think i might be too scared lol Quote Link to comment Share on other sites More sharing options...
Jurgen-Jm-Imports Posted January 13, 2011 Share Posted January 13, 2011 You are putting me right off these id2000's. great on race fuel mate or E85.. if your interested i can buy E85 in drums.. fancy getting a few for some discount ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.