James

Note: I would happily sell my current bumper+RMM configuration outright (thinking around £150) once I find an OEM facelift bumper.

I have this at present: https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/317614_284345004924157_157593177599341_1024380_21625587_n.jpg I'm looking for an OEM facelift front (with the bar at the 'mouth' and the indicators (amber, of course! No clear here ) ) in 040 white to replace it! I'm looking at a carbon lip from Mr Whiffin and would ideally like a facelift front to fit it to so thought I'd be as well to get rid of my current one + lip all at once! It is currently in a high build white primer so just needs a little prep then painted (couple of small scuffs at the bottom of the lip as it is somewhat low and roads up here aren't the nicest!). The lip is bonded on as opposed to bolted and the main body of the bumper has the registration plate mount holes filled and smoothed like so: https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/206424_507655625293_339200132_233026_2924583_n.jpg Show me what you've got!

The Borbet A could look nice: Though with flat centres and a bit more dish like these: http://cache2.corradodatabase.com/images/qbt19ovikekkajxi.jpg I've always loved them. Other choices would be Porsche turbo twists: http://www.autometrix.co.uk/audi/carsforsale/JUL2011/silver-s2.jpg Or (similar-ish to the Borbets) Fittipaldi:

TRD Type R spoiler too, yuck!

Welcome along

Good to see everything coming together for you Jurgen! Can't wait to see what it produces

Sorry to hear. Doesn't look too bad. Insurance would definitely write it off though! They were pretty harsh on me for a minimal bump.

My day has been made! Now to try and get my current front sold

Oh nice! I missed that thread! AMAZING thank you Westy! Have been wanting one for aaaaaaaaaaages! HKS Kansai FTW!

That is a good call actually Mitchell! Is Noel on here as a member that I could contact him or just contactable externally? I'll maybe have a trawl through eBay to see if I can find places like that, might have to! http://www.sp-power.com/wp-content/uploads/2009/10/dsc_00971.jpg

If there is someone good and reliable that can do this (I'm thinking Paul Whiffin might be able to? Considering all the 'Whifbitz' carbon pieces?) then I'd happily try to organise a group buy as I think the item would be quite appealing

Hello folks Is there anyone on the forum (or that someone knows) that could make a carbon fibre version of something if provided with the original item (make a mould etc.)? I have found something that I'd love to have but have always been after it in carbon instead of just fibreglass!

I'll let you off.

I went for the HCB005. Great battery

Shame that it isn't going to plan off the bat, sure it'll be ok!

Looking for a hard intake pipe and Apexi/other filter if there is anything available? I currently have a poor flexipipe which is getting pulled towards my viscous fan under load.

First 1998 spec I've seen with prefacelift fronts, rears and wing indicators. Haha

Love the colour! RSP will always look good! I'm with Marc - I don't know if I'm taken with the Stillen bumper. Have seen one in person before and just can't pin it down but I prefer stock, Ridox, Do-Luck etc. All preference though and I hope that you are happy! Colour match looks good from the pics!

PM sent

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/263395_508864013673_339200132_256953_1941543_n.jpg

Yes indeed.

Enjoyed that

Jurgen, that white one you took in was a T51 single wasn't it?

Very nice! I hope that when I have the sorta cash these go for that a nice one appears and I can snag it