p3te

i may be along for this

Ok thanks :-)

im after a spare to get chromed anyone got one?

offers?

Few parts i have going spare *added* i now have a power steering tank going spare with stainless steel cap, pics to follow £30 First a 4 spoke steering wheel removed from my jspec supra, in good condition but one of the bolts that hold the airbag is missing solddelivered to anywhere in the UK [ATTACH=CONFIG]149198[/ATTACH][ATTACH=CONFIG]149200[/ATTACH] Standard cat back exhaust from a jspec supra, good condition with no corrosion I’d like this collected if possible £offers [ATTACH=CONFIG]149202[/ATTACH][ATTACH=CONFIG]149203[/ATTACH] Jspec brakes, these weren’t great to be honest, the discs are pretty much scrap and the callipers could do with a refurb, about 5mm on the pads £offers? Again would prefer collection due to the weight Pics here: http://imageshack.us/g/412/p1010176t.jpg/ Boot carpet with sub hole in good condition [ATTACH=CONFIG]149207[/ATTACH] £Offers would prefer collected, how would you send a big carpet through the post? whifbitz oil catch tank with -12AN fitting, decided not to fit this, I’ve just had it powder coated in black and have with it a weld on fitting for the cam cover, 2 hose finished and a black 45 degree push on fitting(all is needed is a hose and another push fitting for the cam cover) [ATTACH=CONFIG]149208[/ATTACH][ATTACH=CONFIG]149209[/ATTACH][ATTACH=CONFIG]149210[/ATTACH][ATTACH=CONFIG]149211[/ATTACH] £sold Door card arm rest trim both sides [ATTACH=CONFIG]149212[/ATTACH] £offers

thanks

Hi, can anyone tell me the part number for the gasket that goes between the top water neck and engine(pic) and also can someone confirm these part numbers for the cam covers on a TT 11214-46011 - gasket rocker cover (exhaust side) 11213-46020-gasket rocker (intake side)

does the pistons not want pushing back in the caliper? if the disc was worn the extra thickness of the new disc it will be making it rub

and now the most importand video of the weekend:innocent: [video=youtube;J8q8--ewsfI]http://www.youtube.com/watch?v=J8q8--ewsfI&feature=related

Did you take the internals out of the cam covers to get them powder coated or just leave them in?

just a turbo heatshield now

Very shiney haha :-p was a dark haird lass and she had sunglasses on peter, welcome back to supra ownership btw

Seen you at about 12 o'clock today, female driver anyone on here? Looked nice and clean:d

only just seen this thread, i also have a set of the standard turbo hoses if needed

i dont think they do dark red but http://www.roosemotorsport.co.uk/ http://www.performancesiliconehoses.com/ and http://www.merlinmotorsport.co.uk/SAMCO-HOSE-&-KITS/c16/index.html

Got mine today as well thanks

still after heatshield and ps tank

possibly interested in 60mm boost, oil pressure, oil temp and water temp

Should make things easier :-) thought it might have needed to be there because of the baffle inside

I thought about that but didn't know if it would effect how it, so du reckon it would be fine just welding the hole up and welding a fitting near the back of the cam cover?

I have one of these whifbitz catch tanks and am wanting to fit it to my TT, im fitting it with push on fittings and 19mm silicone hose. On a single turbo it’s just a case of welding a 12AN fitting on your cam cover and fitting a 90 degree fitting but on the TT there’s only about 20mm clearance between the cam cover and the vac hard pipe/turbo pipe there won’t even be enough space for a forged fitting i think, i thought about making a little elbow from some 20mm alloy pipe and could do no bother but then it means i can’t get to the bolt that fixes the cam cover any ideas on how i could fit it?

looking good where bouts did you take it?

1. Supra Kong 2. Parsons76 3. Rob W 4. lexmk4 5. Peter P 6. gixer_81 7. tooquicktostop 8. p3te