AlanM
-
Posts
3718 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by AlanM
-
As Nic says, fixed it as above. Pipe below the PS fluid resevoir tank is now weeping a bit but it is brittle so plan changing it and fluid soon - like April maybe ,, lol
-
Sorry to hear this one Nic, you could do without that just now
-
Aye, they are just stuck on, gently prise them off from one end, mine came off quite easy. Bit of a bugger getting all the glue off the paitwork afterwards though. I never ever put the new ones on, preferred the look without them
-
Another reason why my Supra doesn't like the cold....
AlanM replied to Jim_1979's topic in Supra Chat
With a drop of Baby oil -
Good one, looks really good. Mr Plod up here (who has nothing better to do) would not let you off with that number plate cos it ain't vertical as required by law. I was charged, later dropped, cos 4 of my 5 digits on front plate were 1 mm too narrow
-
I can just get in/out of the Supra when I put it in the garage but have just started digging out the founds to double the size of the garage, length and width, be able to work on it then and maybe even the vectra will get put in there sometimes
-
Homer, nice one, and really appreciate the write up and sharing
-
Phosphoric acid will do it Nic but will need polishing after. Don't use Hydroflouric acid unless you are really sure of what you are doing ........
-
My closest Optimax/V Power filling station is 20 miles away, has always got me there .....lol
-
36 should be fine, I tried 38 found it a bit hard. Why you running larger aspect ratio (smaller diameter) on rear?
-
nope, no sign
-
Funny you should ask for this, I was going to ask for the same info
-
Good luck with your new car, hope this thread doesn't put you off coming back here is you ever get another Supra
-
That far up? That is the deep south!!
-
Roughly when is this planned for?
-
Braided lines make a big difference to the feel of the brakes for a very small cost
-
nah, it is the front part of the undertray, not that big so should be reasonable to post. PM'd you Graham
-
The bit for under the FMIC mate, how much you wanting for it?
-
Are they different on the Active spoiler car? I wouldn't think so.
-
Have you got the front undertray, bit about 5/6" deep? How much if you have? Cheers
-
Anybody got the front bit of undertray - only about 5 or 6 inches deep - that they would be willing to sell?
-
E-mailed you Nic, Cheers
-
Need a set of these now I have my Glass HL and HIDs. Anybody got a set?
-
Just had the same problem with new upgrade to UK Spec brakes three months ago. Turned out to be front offside wheel bearing - I could have sworn it was a warped disk
-
Give it a fairly hard blow with the sole of your foot just below the offside headlight on the bumper (don't worry you won't damage it). Safety feature which unlocks car in crash situation
