Jump to content
The mkiv Supra Owners Club

sideexitsupra

Club Members
 View Profile  See their activity

  • Posts

    1813

  • Joined

 Content Type 

Everything posted by sideexitsupra

  1. sideexitsupra
    Can't hear mine either.
  2. sideexitsupra
    As I said above. Wide and sensor should go into 2nd cat or 2nd Decat pipe.
  3. sideexitsupra
    Could it be you didn't actually say thank you?
  4. sideexitsupra
    Not sure on how much, but you need to check the bearing flange too. These are very expensive, about £200 if I remember correctly. I recently had a rear bearing go on the way to Suprapod :-( , and I got a complete hub assembly from Keron. Far cheaper, but I guess I don't know how long it will last.
  5. sideexitsupra
    What type of AFR gauge is it? Normally you need to put a wideband sensor in the 2nd Decat pipe. I may be wrong but I thought the std sensor is narrowband?
  6. sideexitsupra
    Sound good, might be up for this.
  7. sideexitsupra
    I would keep it off the second turbo until properly sorted and avoid wot too.
  8. sideexitsupra
    Sure, he has full BPU kits on his website too! http://whifbitzperformancetuning.co.uk/toyota-supra-performance-packs-c-38_43_663.html
  9. sideexitsupra
    Check with Paul at Whifbitz about price as I think they were on a special deal! Fine for BPU and SteveL was running something similar though not identical on his 700+ BHP Time Attack car. So I guess should be ok for most!
  10. sideexitsupra
    I agree, the manufacturer that makes these for Paul said it should be ok when they used my car to make the template for these exhausts. However I still got Paul to wrap that box to be safe and the pipes have not been effected in 18 months.
  11. sideexitsupra
    Well if they get that upset they can go to GTROC instead of coming on here!
  12. sideexitsupra
    Sounds great, just like mine.
  13. sideexitsupra
    Sounds like mine was before we changed the Decat pipe. This is how mine looked with the old Decat. Looks fine, but it wasn't.
  14. sideexitsupra
    What 2nd Decat pipe have you got? I had a HKS 3" when we first tried to fit this and it was really bad. Changed to a Whifbitz one and it was very nearly perfect. The difference side to side is about 10mm on mine.
  15. sideexitsupra
    From the West Mids I would recommend either Chris Wilson near Telford or Ash at Garage786 in Leicester. Hope that helps
  16. sideexitsupra
    I have the belts out of my car available. Don't know if they are ok or not but seemed to be. Never used them, have had harnesses since I bought it. If you are interested PM me an offer.
  17. sideexitsupra
    Mine is the same, slightly inset on the passenger side! Might get some trims to extend them at some point. Give the area around the exhausts a good polish and do it once a week! This should stop it from staining.
  18. sideexitsupra
    Well I would suggest getting an aftermarket steering wheel and hub adapter. If heat is a problem I would go for a suede rimmed wheel. Sounds like you need a new seatbelt?
  19. sideexitsupra
    Would recommend losing the bus steering wheel, or at the very least get it put on straight. Over committed at the start of the lap but reigned it back in towards the end. If that was your fastest lap I reckon you have a second or two in those first 3 or 4 corners with the amount of sideways action I saw. Give us the spec of your car and few more photos please.
  20. sideexitsupra
    Or I could save you £24 delivery Rick by picking them up for you on one of many trips down south. I am actually down there Tuesday if you go for the 2.5" version!!! Just to remind you, I have 2.5" decats into twin 2.5" outlets. I would go with 2.5" decats with a twin box 3" for your car. Think the single box would be too loud and not in keeping! My tuppence worth, anyway.
  21. sideexitsupra

    hi

    sideexitsupra replied to a topic in New Members

    Is your name really Stavros?
  22. sideexitsupra
    So you got the exhaust then. I think that makes 2 of us now. Not sure if Paul mentioned it but might be an idea to wrap the passenger side silencer with some exhaust wrap as I guess you have had to remove the stock heat shield and the fuel pipes aren't that far away!
  23. sideexitsupra
    1) Rob Wild - GTR - 620hp 2)sideexitsupra 3) 4) 5) Gutted I couldn't come over on Saturday, so funds and time permitting I will be there.
  24. sideexitsupra
    Have you been away on holiday Chris? It's been quiet without you, especially since Josh moved into his new house. +1 on this though.
  25. sideexitsupra
    That will be "has struck again"..................
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.