Jump to content
The mkiv Supra Owners Club

dr_jekyll

Club Members
  • Posts

    7754
  • Joined

Everything posted by dr_jekyll

  1. may have bent a rod with a freak hydro locking incident, if its bent I might have to miss it again , if its straight im still in. need a new loom before I can test it though
  2. it would have fallen through when you took the plugs out. if it was getting into the combustion chamber when the car was running youd know.
  3. don't worry then . clean it up put it back together and enjoy.
  4. doesent over heat or over pressure the system?
  5. is the car smoking? if the rings are worn allowing oil past it will be smoking. and I doubt youd have 150psi per cylinder. is the car using oil?
  6. 150 is fine on the gte . youl prob find the oil is dripping from the cam cover gaskets , very common
  7. make sure the top pipe is the correct way around. I had one on backwards in the past and the fekker wouldn't bleed. turned it around and fine ... weird
  8. you can also use a gs300 alternator that has a high output. they seem to be much cheaper too
  9. you need the soarer one buddy
  10. youd need tyres from a top fuel funny car id imagen,
  11. toyota dealer part number (4runner cap) 19101-65040.
  12. please don't put a body kit on it , just please
  13. I had limited edition p-seros with yellow writing once on my black car. looked awesome , cant get them anymore
  14. i think you should go sit in the corner and think about what you've done
  15. 1. Branners 2. JamieP 3. Josh42 4. Budz 5. Steve.m 6. TheTurtlesHead (Holiday Permitting) 7. imi 8. TT paul 9. Dragonball 10. Carbon_Bullet (if the car is built in time ) No chance!!! Lol... 11. Lee P 12. Luxluc 13. Dr_Jekyll - - - Updated - - - 1. Branners 2. JamieP 3. Josh42 4. Budz 5. Steve.m 6. TheTurtlesHead (Holiday Permitting) 7. imi 8. TT paul 9. Dragonball 10. Carbon_Bullet (if the car is built in time ) No chance!!! Lol... 11. Lee P 12. Luxluc 13. Dr_Jekyll
  16. how tomorrow goes will be the deciding factor if im coming.... mapping day. but if it all goes to plan an nothing pops im in,
  17. ive never had an option? just bought ucf20 discs. never had any that didn't fit
  18. you had a chioce o4 4 pre assigned places to drill and you chose to ignor all of them
  19. feel free to ring me pmd
  20. Is the bottom port open or do u have a b.c plumbed in
  21. I might have missed something here but why not justt put a .6 bar spring in your wastegate
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.