TBDevelopments Posted September 26, 2013 Share Posted September 26, 2013 LOL when I thought it would be easy to find this it seems impossible lol I've tried wanted section, I've tried every supplier on here I can think off, breakers, ebay, replied to all the forsale posts and someones bought them. Is this a common failure point and that why they get snapped up? Or if anyone knows the where abouts of a Jspec (if there is any difference to uk) i would be very much appreciated. In fact i only need to borrow it but would pay for the pleasure, or if i had to buy it i would. Tim Link to comment Share on other sites More sharing options...
Gpro Posted September 26, 2013 Share Posted September 26, 2013 (edited) i throw mine away! Why do you want that? theirs nothing mechanical on it to fail Premium e liquid Edited September 7, 2014 by Gpro (see edit history) Link to comment Share on other sites More sharing options...
TBDevelopments Posted September 26, 2013 Author Share Posted September 26, 2013 (edited) I have no idea but every time I see someone selling it, its always sold by the time I ask. Basically I'm building a single turbocharger kit for my own car. I've got a complete mockup engine on the stand, the full stock TT setup, everything apart from that little piece. Once i get that i can make a jig that bolts to the block to allow me to have a Precat start and then finishing position. so when i put my single turbo manifold on the engine i can accurately build the downpipe and wastegate pipe work to finish in factory positions. Just seem to be having no luck finding this last little part Tim Edited September 26, 2013 by listy (see edit history) Link to comment Share on other sites More sharing options...
j_jza80 Posted September 26, 2013 Share Posted September 26, 2013 I doubt there's much of a market for yet another single turbo kit for the 2JZ TBH, there's so many available as it is. However, if you could design a budget method of adapting the stock manifold to accept a small single, that would probably do well, especially for those with blown stock turbos. Pretty sure one of the Japanese manufacturers made one at some point. Link to comment Share on other sites More sharing options...
TBDevelopments Posted September 26, 2013 Author Share Posted September 26, 2013 (edited) my aim is a street based turbo, I'm leaving the big bhp setups to people like whifbitz etc. but i feel the BPU TT setup to moving to a small street turbo, without having to go made. using a special ported cast manifold setup, genuine garrett GTX turbochargers and Tial wastegate. in the 450-600bhp range only, turbo option dependant. with similar torque. Straight replacement for substantially cheaper than the big bhp kits, and aimed at reliability because of the cast setup........its all in the air at the moment as i will be building my own kit for my supra. Tim Edited September 26, 2013 by Gaz6002 (see edit history) Link to comment Share on other sites More sharing options...
TBDevelopments Posted September 26, 2013 Author Share Posted September 26, 2013 (edited) this is for a home built single turbocharger setup for a private individual (myself) Tim Edited September 26, 2013 by Gaz6002 (see edit history) Link to comment Share on other sites More sharing options...
Lbooth Posted September 26, 2013 Share Posted September 26, 2013 (edited) Looks like the exhaust gas control valve for the sequential system so would expect it to be redundant on a single set up. It is different for the UK spec as I needed one recently, must of been lucky to get one same day as posting wanted thread! If all else fails Toyota will sort you out for around 800 quid (600 for jspec)! Edited September 26, 2013 by Lbooth (see edit history) Link to comment Share on other sites More sharing options...
mellonman Posted September 26, 2013 Share Posted September 26, 2013 they are not a failure point its just they are needed for TT and not for singles and get thrown out Buuuuuut i have one whats your offer? Link to comment Share on other sites More sharing options...
Jos Posted September 26, 2013 Share Posted September 26, 2013 (edited) I had replied in your wanted thread, but got no reply? But looking foreward to your single build, as I'm planning to do something similar next winter. Edited September 26, 2013 by Jos (see edit history) Link to comment Share on other sites More sharing options...
AJI Posted September 26, 2013 Share Posted September 26, 2013 ...... but i feel there is a gap in the market from the BPU TT setup to moving to a small street turbo, without having to go mad.... I guess I may fall in to that market Struggling to decide whether to sell my UKTT6 bpu or put an affordable turbo upgrade to provide another 100bhp and keep her for another couple of years. Link to comment Share on other sites More sharing options...
hodge Posted September 26, 2013 Share Posted September 26, 2013 Think I've got 2 in the shed. Link to comment Share on other sites More sharing options...
straightsix Posted September 26, 2013 Share Posted September 26, 2013 There's a high flow one made by this company: https://www.facebook.com/pages/ARTec-Performance-Parts/184071731705639 Link to comment Share on other sites More sharing options...
marc_p Posted September 26, 2013 Share Posted September 26, 2013 I have one sat in a box of spares aswell. Link to comment Share on other sites More sharing options...
TBDevelopments Posted September 26, 2013 Author Share Posted September 26, 2013 (edited) oh thankyou guys this is all i need, its not the control valve i need, as i have that part. Its just the last cast part underneath in the picture. The part that has the O2 sensor hole in it. Do you guys still have that part? if so i can i buy it or borrow it for a short period? Tim Edited September 26, 2013 by Gaz6002 this is getting boring now. (see edit history) Link to comment Share on other sites More sharing options...
supra_ufo Posted September 26, 2013 Share Posted September 26, 2013 There is a ceramic part in there that fails. Link to comment Share on other sites More sharing options...
Chris Wilson Posted September 26, 2013 Share Posted September 26, 2013 There is a ceramic part in there that fails. No there isn't, the exhaust control valve is in the thinner section above, the last section is just the confluence of the two ports in the EGCV section down to a single downpipe. I have never known one crack or fail in any way though. Link to comment Share on other sites More sharing options...
Justin Bieber Posted September 26, 2013 Share Posted September 26, 2013 There's a high flow one made by this company: https://www.facebook.com/pages/ARTec-Performance-Parts/184071731705639 You sir, are a legend! I've been looking for one for ages! Link to comment Share on other sites More sharing options...
TBDevelopments Posted September 26, 2013 Author Share Posted September 26, 2013 yeah as explained on the phone chris only need one for mockup so wouldn't be bothered if it was damaged. just seem to get snapped up when they came up for sale Tim Link to comment Share on other sites More sharing options...
hodge Posted September 26, 2013 Share Posted September 26, 2013 I'm happy to sell you 1 of mine. Link to comment Share on other sites More sharing options...
TBDevelopments Posted September 26, 2013 Author Share Posted September 26, 2013 how much? Tim - - - Updated - - - also if you've got a stock manifold that would also be great. Tim Link to comment Share on other sites More sharing options...
hodge Posted September 27, 2013 Share Posted September 27, 2013 I'll check in the shed tomorrow. £30 delivered. Link to comment Share on other sites More sharing options...
hodge Posted September 27, 2013 Share Posted September 27, 2013 Don't have a spare manifold sorry. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now