Jump to content
The mkiv Supra Owners Club

Dnk

Club Members
  • Posts

    20559
  • Joined

  • Days Won

    21

Everything posted by Dnk

  1. Stock dampers with Eibach pro lowering springs
  2. Spray with TF remover, agitate with brush then steam clean followed by and air line and WD40
  3. Get a printout, scam it then post on here
  4. No problem but i'd want to know as i'm funny like that
  5. What were the before and after figures for the camber, toe & caster ?
  6. Dnk

    kash

    I just spoke to Kash and apparently he's looking to buy a TT
  7. Ibrar used this place to do his widebody and seemed to be happy with them. I shall be taking my Landcruiser there next week after we've changed the bushes and ball joints Their in B'ham not far from the Blues ground http://www.pro4wheelalignment.co.uk
  8. The stock filter is fine on the NA, you've not tuned the engine to require more air than it can supply so no need for anything else. It can deal with a TT at 1.2 bar
  9. Have a look here, this is where i got my genuine Apexi filter from http://www.frsport.com
  10. Heres a link to my for sale thread http://www.mkivsupra.net/vbb/showthread.php?278717-O-E-Wheels-17-quot
  11. I didn't think the demisterman matrix was anywhere near as good as the o/e matrix.
  12. Yup Nic's slacking A narrower tyre is better in snow as it cuts through it giving you grip rather than sliding around on top of it I have a set of o/e 17's with tyres caps and o/e nuts for sale
  13. Its not that bad a job to do but can look a bit daunting, there is a how to in here somewhere, just follow that and you'll be fine if you have some mechanical skills and a few required tools I certainly wouldn't be paying anyone £500 to do it let alone £1000 !!
  14. Hope your not paying over the odds for them http://www.sparkplugs.co.uk approx £43 for BKR5EIX or look on ebay and amazon
  15. Dnk

    crank pulley

    I think i'd bite the bullet and get a new one personally, i think Whifbitz genuine one is the cheapest o/e, its on their xmas special list at £282 inc vat
  16. Dnk

    crank pulley

    A second hand one shouldn't be an issue as long as it was fitted and removed correctly, its not too old and you know the mileage its done.
  17. Still way too in my opinion
  18. Like the boots got £7k in it
  19. £7.5k Simply don't its worth about £500 maybe For a little bit more you can have my UK spec TT with widebody kit etc, its in the classified section in here
  20. Just change or modify the pipe work that goes round the airbox, its not rocket science Or make a custom intake pipe which is also pretty easy and fits directly to the MAF using a silicon hose like mine, mine is for the Apexi dual cone filter. There's no way in the world i'd be paying £100 + for a bit of pipe and some hose clips even if it has got HKS written on it.
  21. If you had a nut to fit the thread you could use extra washers and lock the main washer to the bolt head to save you tack welding it
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.