jongilly

Hi all, Can you help me find a brand new brake master cylinder, needed for a 1995 car, need the larger bore 27mm tt version, abs, non trac. Cheers gilly

Paint thinners... your local motor factor should have it

Yes have seen this on facebook.. sent the guy a message... markblyth on this forum has purchased items from this guy before an recommends... so seems a goer

Yes i have pm'd you about both bracket and auto gear handle.. ring me cheers )))

Do you have the air con bracket, that goes around the dryer canister and holds it to the air con radiator ? Item 88472 on pic

Hi, perfect. Need the complete leather bound handle, with the blue wire, ill pm you Cheers

Hi, perfect. Need the complete leather bound handle, with the blue wire, ill pm you Cheers

Hi all, Am i missing something, brakes where working correctly before i sent calipers off for a refurb. Car is supra turbo without trac The master cylinder drained itself. All calipers have been refitted. Banjos and nipples all tight I have tried to bleed the master cylinder, but cant get any fluid from it, by using the method in the workshop manual. That is, remove the 2 pipes off master cylinder, slowly press brake pedal and then cover the 2 holes in master cylinder with fingers and release pedal, repeat 5 times, not getting any fluid out. I have used a vacuum pump on each calipers to draw fluid down down the lines, but getting bubbles all the time with the fluid. Have pulled approx 200ml on each line, still the same. Brake pedal is non existent, ie no pressure. Using the old method of using a friend on pedal to pump then hold down, then crack the nipple, im getting nothing out. Im thinking have the seals inverted in the master cylinder so need to rebuild the cylinder... or am i missing something else Cheers

Hi all, Need an auto gear lever with buttons etc included. Part numbers 84722-14090 33623-14050 Cheers

Hi all. Im wanting about 20 of these bolts, new or nearly new, obviously cant get from toyota uk at present, will buy or replace, what ever suits you. Using them to refit or the standard side plastics after riv nutting the new sills. Cheers

Bumpy bump ))

You sold it to me markblyth

Hello scotland

Hi all, As stated, im searching for a bracket for the air conditioning dryer. The bracket attaches the dryer to the air conditioning radiator ( condenser) at the front of the car. See pic , item 88472, part number 88472-14200. Its for my uk spec auto that im restoring. Cheers

1. Josh42 - Staffordshire 2. blythmrk - Derbyshire/Yorkshire 3. erachter - West Sussex 4. Mike2JZ - Zimbabwe 5. Ben_harmer32 - West Sussex 6. Safcdixon - Durham 7. AdamAMG - Mars 8. Tayr - Uranus/Hampshire 9. Lewmc93 - Merseyside / The TSS 10. Mwilkinson - Hampshire 11. m12aak - Leicester 12. Kev.O - Bristol 13. Samurai 20V - South Africa, Durban 14. Trebor69 - Swadlincote 15. Drift_bear - Aberdeen 16. Harrypm82 - Manchester 17. bonus_2000 - Kent 18. Sukhy - Wolverhampton 19. Dnk - Dunk - Redditch 20. Noz - Devon 21. Jim_supra - East Yorkshire 22. Jord - Oxford 23. Style - Newcastle 24. MrGRT - Berkshire 25. kolb - Estonia 26. Swampy - Lincolnshir 27. HamzaHKhan - London 28. WayneW - Belgium 29. sebas - Poland atm 30. Annabella - Lancashire 31. Foxx - Leicestershire 32. Auzzam - London 33.->K1 - France 34. mellonman - SE LondoN 35. Darren - East Sussex 36. Hamilton- Worcestershire 37. absz-Bedfordshire 38. TheRhdsupra - Netherlands, Vierlingsbeek 39. Jongilly - cumbria

Bump

If you mean the brake and caliper dust shield front right, amayama part num (4778114160) approx £25... i bought one from local mr t about 40£

What you need go do, is blast the nut with some heat, bottle of mapgas will do, for 30secs.. then get your self a milwauke impact wrench, hi torque, from bigredtools in preston, other suppliers available for £200 plus battery, these guns will rattle off at 1400lb/ft, you will probably have to remove raditor to get it in

The tray that the battery sits on is still available.. part num (7443114070) approx £50

Ohh the joys... my rears have just failed, they seemed ok, but had been undersealed. Just had the rear subframe out aswell... dooh... are they still available from mr t ?

Hmm.. how else you going to cool it...sweet talk ..lol Or you mean a water feed aswell as oil ))

I have a garrett gt4089 on mine... 807bhp crank did over 850.. but turned back... running 28psi on uk 98 octane super unleaded.. 1000cc injectors

Is that a crack and a weld on the drivers rear caliper ?

Have you tried amayama ?

Rear bumper bars are still available from toyota uk, paid about 130 plus for mine...