JayJay1374

Have you got the dial set to the right position? Should be 9 iirc

Very over the top in my opinion. Personally I wouldn't pay more than 200 for them. I bought a mint set of recaro speeds for 300.

You can buy off the road insurance. And it's quite cheap iirc. So atleast if something did happen you wouldn't be left out of pocket.

I have a set but I'm based in Durham.

You can get plates made on eBay. And there usually pretty quick.

I see about the same on mine mate. I'm running 1.2/1.3 bar.

As Marc said Naz. Pretty much bang on. Power and AFR Boost and AFR

So safc_dixon arranged a rolling road day for yesterday. With all northeast cars giving good power. Last time I was on the dyno it ran 368.9 @ roughly 1 bar. Since then the cars had new plugs, 12v fuel pump mod, air con delete , greddy profec boost controller and some SBA Tuning magic. The graph Very happy! 421.1 @1.3 bar Now earlier in the week I decided to polish my hks rs intake and power steering res. whilst the induction kit was off I decided to clean the airfilter. Which after removing decided to fall apart. Got quite lucky there! And lucky I managed to source a new replacement on eBay which someone had bought and never fitted.

1. Robby a 406.6 Bhp 2. Kitch79 - 371.6 BHP @ 0.85bar (gotta get that in [emoji12]) 3. JayJay1374 421.1 BHP @ 1.3 bar

Valley.

Yeah £80

Yeah but they are double the price of all previous ones on here.

As above really. After a set of fully working oem footwell lights.

I paid £50 for my front cusco. So id offer the same for your rear.

Nice write up mate. And very nice car! Great power for stock twins too!

Lower cam covers are hard to come by. I had to by a full set of covers to get one. try Toyota for a new one.

I have thought about it. Would look good polished up to match - - - Updated - - - Thanks mate!

Valley tonight?

Cheers mate. Many hours have gone into it recently. Also need to relocate the expansion tank. Planning a fuse box relocation over Christmas.

For a while now I've been working on sprucing up the engine bay. So here's a few pics. When I bought the car. Now. Finally got my mvp top rad hose on and pas and brake res caps. On the todo list so far is repolish the hks rs pipe.

I'm currently fitting out my unit. I'm using kitchen units as storage and the counter tops as work space. Best of all it was free due to someone upgrading.

6 month minimum. £126 ish iirc

Valley tonight anyone?

Chris, when using a two post ramp where would you position the 4 pads?

Sorry Paul but most the NE lads are heading to York raceway.