Jump to content
The mkiv Supra Owners Club

np89

Club Members
  • Posts

    1056
  • Joined

Everything posted by np89

  1. It looks a complete mintbox! Id be on the high side of 13k especially if its for insurance purposes!
  2. Its not sensors its an actual grounding point that bolts to the underside of the stock manifold and also to the back of the engine bay
  3. Did you remember to re-connect all the grounds that are on the oem manifold?
  4. but is the large case jap diff the same as the large case uk diff?
  5. Just as a bit of revival on this, does anyone know if it is possible to get a 1.5 way equivlent for the UK Spec B04D diff?
  6. You can narrow down the area thats rattling by pressing down the dash and seeing if the noise stops. Then go from there
  7. You can do that if you wish, the proper way would be to dismantle and re-assemble the dash and ensure all the fasteners are tight
  8. I know the sound you mean, thats just what old supras sound like unfortunately bet it goes away if you put pressure on that section of the dash!
  9. Why do you want NOS in a road car?
  10. Just buy the full set and have the fronts as spares
  11. Holes im not worried about. Are you willing to sell without the spoiler? Pm me please
  12. I think the general consensus is that unless there is something wrong you shudnt do a full flush like if the fluid isnt burnt a normal chance will be ok but if you've no idea when the last time it was done was I'd change it
  13. Or get on to curt aigner in the US. Hes a good lad will sort you out no problem, bas all in stock and isnt bad with the old customs declaration
  14. Don't quite alot of ppl fall foul of some earth points on around and under the inlet manifold not connected? And rhe one at the back of the engine to body?
  15. Chris Wilson or Lee P at SRD might be worth a rattle?
  16. hmmm that would have been my best guess. could always bridge it out at the ecu. If the car starts thats your issue but it means the car will still try and start if like you accidently left it in 1,2,D or R, which probably isnt ideal but would be good for diagnoses
  17. In the loom to the gearbox afaik? Is it a manual or auto loom you are using?
  18. If they "refurbed" them did they paint or powdercoat them and then forget to run a tap down the bolt holes? This would cause the issues they are describing
  19. Alot of ppl just change whats in the sump which is 2litres. There are mixed opinions about this
  20. Although the box only holds 8, by the time you get it through etc
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.