LOGIE
-
Posts
2255 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by LOGIE
-
I dont like any of them. Imo they are the worst thing to happen to the supra.... it brought a great car to the attension of chavs. Sorry but its my opinion. Acting was terrible also.
-
That is something I hadnt thought of Chris. I am only running this 1 pump but ill leave it in. Thanks guys.
-
Remember to have new sump pan sealant 2-3 mm bead all the way around and dont let it go into the pan... so best to let it dry before topping up.
-
Im hoping the turtleneck will come on and tell me as he had it fitted.
-
I sourced a TT engine BAY loom with the fuse box and the 2 looms behind the dash, as these are different from NA ( my thinking was if it all went Pete Tong I could just drop the NA lump back in without trying to put wiring back to the way it was. Im very thorough and like to cover all possible f~~k ups before they happen. Good luck and have patience DONT RUSH IT
-
Done a quick search guys but...nada. Im in new territory here ive never delved into BPUing myself so im feeling my way through this. I bought an almost new bosch fuel pump of James (turtle) it came with a bosch non return valve. Do I need to fit this (the valve)?
-
Im guessing as he had a UK auto single... just seemed most likely
-
Caseys old car?
-
Im out of touch with the club at the moment...been off changing jobs and getting trained up etc. So whats the spec of your supra Lyndon?
-
Very nice buy.
-
https://plus.google.com/+caranddriver/posts/CNgoBzEqjxy
-
I had unpredictable central locking for a while once it was bad in wet weather. When the summer came it was fine so I out it down to rain running down the window. I waxoyled the inside of the door on a hot try day and its been fine since.
-
Class. [emoji2]
-
Cheers fastcar. Appreciated
-
Cheers Listy I was thinking that. Bound to be some 3M rubber matt stuff on fleabay just wondered if they actually exist or if spoiler went straight to boot
-
Thus is going very stupid but ive never removed the rear spoiler... can someone tell me if there is some sort of seal that sits between the spoiler legs and the bootlid? (to stop water seeping into bolt holes) If these exit anyone got a link of pic?
-
Could it be the A/C by any chance?
-
Sounds very odd! I doubt its the heater matrix, any change to noise when fans are turned up or down?
-
Lotus Elan s3/4.
-
Dont press it in too far.. just so its flush.
-
Yes mate I used a thin layer of oil and evenly applied a little pressure with my fingers... this got it into place. I had a small rubber Mallet on standby to tap around edges but it wasnt needed. My thumbs were strong enough. I used a seal purchased from Chris Wilson.
-
Cant you just have some resonators welded into the pipework on a spec R?
-
No manu mode for me im affraid
-
Hmmm prob best buy an autobox cooler also then.
-
Hi guys would I be right in thinking that NGK-Iridium BKR6EIX are suitable for both stock and BPU power? car will be running: Chris wilson SMIC 3" Tanabe touring medallion exhaust (I like it quiet) Bosch 044 fuel pump Chris wilson FCD Whifbitz 1 bar restrictor ring Double decatt 1st is 2.5" second is 3 " (restrictor ring is between these) Still to buy a boost controller (prob blitz I colour type s) Cheers all
