supraGZaerotop

got me worring now. i should really take my skirts off and take alook. my skirts have been loose along the door sill for 10 years. do the skirts remove easily without damage? if so how do tjey come off

thanks for the info on the led dash ive been bugging you about over the last couple months. good luck with your new job

[GRIN][/GRIN] well after more money and time spent, all done the buttons in my switches were brown through age and heat by the looks of it. 9 bulbs from Toyota £59 [sHOCK][/sHOCK] only thing that needs doing is my drivers door ring light with it being blue and all, well actually the reason why my ignition ring light was not working is because it had a resistor wired into the wire! lucky I bought the whole bit of the loom off keron. I replaced the loom and refitting a brand new stock bulb, and by the looks of it because they run on the same circuit/loom with the resistor now being taken out it popped my blue led in the door ring lol. or well well happy with the results now,

what is the program?

ha ha you were right mate. i forgot to plug the hazards back in. lol. so you think i can see where it is tho! nuts myst have dropped bk behind, cannot see it anywhere. or well. got new bulbs for the auto spoiler, slip control and ac control unit in order from mr T. £59 for 9 bulbs!!!

when i go for drive, especially to places i dont know i always hit the door lock button and lock myself in the car.

Toyota prices are very strange lol, astronomical is a good name for the pricing. just for a laugh I thought id check the availability of a brand new stock oem double din radio unit, my god, on amayama its £2500+ for a 90s radio unit, really lol

glad mine is in my homes internal garage which is locked via standard locks + ive fitted enfield dead bolts to each side of my garage door, plus a Clifford concept g5 or whatever its called cannot remember and my Qashqai is parked up against my garage door, good luck with that ;-). &*@~ing thieves . hate um

that's not marmite, that looks ace, suits the color for sure

after, still more work to do know, slip control light not working, need to see if I sort out the ac panel with new bulbs, ignition ring , I just bought a load of replacement bits really and hoped for the best, or well its better anyway, I think anyway. ordered a piece of yellow gel sheet now to see if I can cut it to fit over the blue hks gauge, blue and yellow makes green right ;-)

anyway some more pics from yesterday before and after

good question lol. im sure ;-) i can remember plugging the 2 white plugs back in, you got me thinking now. il check tomorrow now. thanks

il be bk on to toyota to see i can get the little bulbs that are in the trac switches/ac panel etc

yeah it seems the bulbs just go over time and you dont really notice lol. cars get passed on no ones the wiser lol. anoter problem now, #€*@ sake!! just took the car out now and my bloody indicators/hazards not working at all now aaaaahhhhjh. i did pop a fuse when putting the dash back because the wires came off my aftermarket fog and i didint know which way round they went, i got it wrong-pop. 10amp fuse in footwell. does anyone know if the indicator fuse in deiver footwell aswell. if not that then dash out again because i must of disturbed some thing. nuts

can someone with a fully working stock green dash please post pics or theyre dash for me to compare . cheers

hi my brace is branded a RSR part. although ive noticed these tend to be labelled with different company logos, so think they are a general part made in japan that are used be different company's

£48 each there from whifbitz. hi yeah the pipe closer to turbo 1 defiantly is the worst pipe.

thanks. yeah i cannot remember it being orange lol

right I've completed returning my dash to stock, although its seems the bulb in the replacement slip control switch I bought is duff, will have to try and get another, also even though I placed a new bulb in ignition key light its not working!, although there was a blue led rammed in the socket which may have cause some damage I just pulled it out ;-), I've got a replacement bit of loom for that anyway. other than that looks good. I've noticed something though I want to ask because I've not seen stock dash lights in 7 years and cannot remember what they are suppose to look like. are the ac controls hi/low settings suppose to be orange or is there a dodgy/wrong bulb in there, also it seems the light in the heater adjust is duff lol.

well for some reason my supra didint seem to like that bailey valve much. just seemed to boost funny. valve was running fine on idle and seemed to be running fine. anyway changes bk to hks now. much better

i do miss the flutter, so much better sounding than a blow off valve. i take it all id have to do to blank it is removed the bov all together and buy a 25mn cap for the ypipe side and blank off the vac feed? whats the best way to block off the vac line!

bk in 2004-2008 i owned a s14a 200sx. loved that car. had it up to about 300hp front mount, fuel pump, fcd, colder plugs, boost controller, intake, complete double decat. tubular manifold, new turbo, was a flying machine i use to have a sard r2d2 bov fitted, and sometimes id disconnect it to get the flutter and i loved the noise way more than than the bov noise. soon as i started reading about compressor stall i stopped with the flutter

you think, whys that? ive never ran my supra one. only my gz i had bk in 2008 had a stock valve and i cannot remember that

what bovs are people running on here pics please

do you think so? interesting. il have to take it out for a drive when i get back home. does it make any difference not having the vac filter, i assume thats what it is that comes with the hks bov. like an inline flying saucer lol- whats it for? because the way this bailey fits there is only need of a very short length if hose