Jellybean

Thanks Chris! Its quiet the pickle why it has a Rock hard lever , will be interesting what is causing it! booked into mechanic tomorrow , just a bit perplexed as the OE is working fine I am hoping its not my stupidity thanks again

The piston on the Oberon is slightly larger to alleviate a heavy clutch lever , 29mm versus OE 28 mm piston MC is OE and is compatible with the Oberon

Thanks Chris , I actually found the OE one I had on prior Was interested in the answer all the same , most lines I could find only where AN type braided Just on a side note to get your insight , I fitted a new Oberon Clutch Slave the weekend, it has a rock hard Clutch lever after I bled it Considering these are very single little units in design and to fit , I presume it is faulty its a 2002 748s Repro steps Installed to the Bike and Bleed as per instructions, the bike has a rock hard Clutch lever (the Pre 2000 Push Rod Spacer was NOT used) Unbolted the Oberon unit from the bike , to test if the piston in the Slave would move , still rock hard Clutch lever , no slave piston movement The OEM Slave was re-installed and Bled , no issues

Hi Motorbike Have some Tygon line on the rear (connecting the remote reservoir to the master cylinder) but the engine heat is causing it to perish Will Gates Racing Fuel line suffice? Key Features and Benefits: • Cover resists heat, oil, ozone and weathering with spiral textile reinforment • Tube has been upgraded to meet changes in fuel characteristics and resists heat and oil • Working pressure up to 1 MPa (10 kg/cm²) • Temperature range from -35°C to +125°C • Meets requirements of SAE J30R7 and DIN 73379 (except for tolerances) thanks

Heres the spec of the old https://millersoilsireland.ie/crx-ls-75w140-nt/ Black looks like 2017 branding, on Opie Oils Email Millers and ask

Very Cool , heard they are a nice bike! Just on a bike 6 months now too, Supra does not get used these days

Thats cool! I say it has a nice rumble from the V6

276 GBP off https://www.amayama.com/en/part/toyota/4806829215?currency=826&q=

Some Lexus SC430 arms are the same , Worth looking into https://www.clublexus.com/forums/suspension-and-brakes/752177-the-definitive-mkiv-supra-sc300-400-suspension-crossover-thread.html

I emailed PHR and asked if it is cast from high nickel content No reply so far

Thanks Jim , that would be fantastic! Will give you the going price! Was planning to send the speedo cluster and control unit to Heckler this winter too

Thanks!

Shropshire must be like some sort of A-team, lock you and Carbon Carl in a garage; you would burst out with an F3 powered carbon composite osgiken lsd eibach damper race car ! His bed is probably made from Carbon! lol

All Functions are gone , leds on it have started failing over the last year; when I turn the lights on , LEDs still remaining may come on for 2-3 secs but it is very intermittent behaviour PITA now, if it rains as I cannot turn on the demister Was looking out for 2nd hand units but need to check the loom wiring too Any advice before I pull it out , I am not too sure if these are a common item to fail

On the way to work this morning , as I looked around like a meerkat , for a rumble of a V8, a feckin Prius ; something horrendously wrong with it but theres hope yet !

Heckler , while you are online My heater control unit has stopped working , What would you recommend , can I run some sort of checks to see it is completely gone

For MOT, the PHR cast manifold will take an OE CAT If I was purchasing I would definitely get it heat coated , think is is around 100 dollars ; PHR can get it done prior shipping

I run Goodyear Eagle F1 , only changed the tyres twice on the Supra in 10 years , put 88K KM on her, tyres still have plenty of thread , current set also have 1 track day

I hope to retire on the price I sell mine for in the future

http://www.ebay.co.uk/itm/Supra-JZA80-Carbonetic-LSD-Big-Case-/222670559610?hash=item33d833197a:g:Ji4AAOSwmolZy7E9

lol Thanks I think my login has so many icons on it , it auto resized

MacBook Pro (Retina, 13-inch, Mid 2014) Os Sierra 10.12.6 I created a 2nd Account login on the Macbook but the screen does not display at 2560 by 1600 pixels (Retina) when you switch over , Lower Menu bar (dock area, is quiet bg) , nothing any different in the Display preferences any Idea's

Gazoo Yaris is 42K in Ireland LOL https://www.toyota.ie/models/yaris-grmn.json

On Ebay , no reserve http://www.ebay.co.uk/itm/-/222658570702