ballsdeep

Iv got some mate done 70k send you a pm now

Bump

Rear spats still available £40 posted

Bump Wings potentially sold

For those asking about fitting they were a pretty decent fit to be fair these are the best pictures I could find I’m afraid.

[ATTACH=CONFIG]227102[/ATTACH] [ATTACH=CONFIG]227103[/ATTACH] [ATTACH=CONFIG]227104[/ATTACH] [ATTACH=CONFIG]227105[/ATTACH] [ATTACH=CONFIG]227106[/ATTACH] [ATTACH=CONFIG]227107[/ATTACH] - - - Updated - - - Sorry guys fibreglass oem style

Oem style fibreglass rear spats removed these today pretty good condition. £40 posted Front fenders are pretty beat up both suffering from rust at the front edges and a small dent in the drivers side one, a battle scare on the passenger side one from someone opening a car door as i was passing. Apologies for the poor pics pending interest il will take some more. SOLD

Just had a quote to replace the bearings of £295 or £445 with them dropping the gearbox so I’m quite happy with that considering the price of second hand boxes.

Thanks I may look into getting a quote, it still drives and selects gear perfectly fine. When they do let go will I still be able to nurse it home? It’s just my luck, I Was planning to sell it in the summer too.

Yes w58 on na-t so I guess it’s understandable if it’s starting to fail now. It’s been a great box so I’l look into repairing it. Is it a rebuild job or can anyone tackle it. I’m not overly impressed with dropping the gearbox again, is there any checks I can do before I commit?

Iv done some searches but nothing quite matches my symptoms. Im getting a noise only when upto temperature my first thought was its the spigot bearing but i only had this done last year along with the release bearing, clutch and flywheel. Iv had very little time to investigate but what i have found is the noise almost certainly goes when the clutch pedal is pressed. The only other thing i have checked is the viscous fan which seems to have more resistance when cold than it does when upto temp? Cold it spins maybe 3/4 before stopping, hot it will spin maybe 2+ times. From what iv read it should be the opposite? I can also stop it by hand when upto temp. Any thoughts on this? Could it be something else maybe gearbox? Really im clutching at straws, I’d like to think a spigot bearing should last longer than 12months and less than 2/300 miles.

I haven’t purchased parts off them but mike did remap my car. I don’t think he’s a bad guy there’s only him and his brother working in the shop and most of the time they would be mapping or road testing. Have you tried contacting him through Facebook messenger?

I’m always looking at cars I can’t afford, mainly m3’s followed by the 335i autovogue and then Audi s5 but deep down I know I would instantly regret selling the supra.

Got one for £50 thanks thought

Appears to be for desktop only so il borrow a laptop and give it a try. Hopefully this works. thanks

Thanks but Keron’s come to my rescue with a low mileage one. It would have been nice to replace it with a new one but it’s just too close to xmas to be spending £300.

please tell me someone has saved these pictures?? I’m really going to need a good write up like this to replace mine..

Any good heater matrix’s going spare?

Have you tried to swap no1 and no2 leads round? Iv heard it reaches but don’t hold me to that? Failing that I should have spares if kendo hasn’t.

I can’t fault mine, still going strong after 4yrs+

Ok £70 or il just keep it.

I didn't check prices where is it up for £90

Great little jack, used it twice to remove and install my gearbox on my own, it's heavy so collection from Manchester. £80 [ATTACH=CONFIG]222433[/ATTACH]

Iv found it mate, how's £12 delivered sound? If you can get back to me before the post office shuts I might be able to get it sent today?