ballsdeep

Love the simplicity of uploading photos to threads. Great work!

I just wanted to share my simple but hopefully affective improvement for the trd spoiler. Decided I wanted to make some gaskets for the base of the spoiler so went about removing them, what I wasn’t expecting was a water feature when I removed one of the mounting bolts. Literally they were both full to the brim with water! So Iv made some for the end of the blade too and plan to cover the bolt holes. Not yet fitted but I’m pretty sure it should prevent any more water in! for anyone needing these this is what I used. 2mm 50x30cm neoprene adhesive sheet cost me £11 off eBay and I still have some left. https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F401911257667

My pictures won’t upload for some reason so borrowed some google images for any one interested I can forward the images.

Good condition Pre-facelift. needs painting, this one had a gauge in it so has a 52mm hole, 20mm fog light switch, alarm led light and the dimmer switch hole was relocated due to where I needed the gauge mounting. £20 collected M23, 1pd or £28 posted 3” straight b.o.v coupler with free hks copy b.o.v (unsure of condition but was working when removed) £25 posted 3” 90 degree b.o.v coupler with new c-clip and o-ring £13 posted (Pictures not loading will take some tomorrow and try again Thanks

Any floating about? Cheers

Ballsdeep - manchester

I have the rubber ducting and vents that go behind the side pods, the vents do have some cracks but will still mount perfectly fine. Rubber ducting is in good nic Iv never seen any for sale before so let’s say £50

So I bought these purely to use the brackets that was missing on a another set I’d bought which I wasn’t told had been removed. Shouldn’t be too difficult to knock some up. Obviously need painting £60 posted

No longer required £50 posted

So £60-70 for the pods would be fair considering they don’t have the brackets. Iv never seen the inserts up for sale any idea what I could list those for?

What’s the going rate for a set of side pods and ducting grills etc they obviously need painting but they also don’t have the metal bracket that they usually come with? Don’t ask me why I was sold a set without knowing they was missing. Iv also got a oem front windscreen seal that I can’t remember what I paid for? Thought I’d ask before I get shot down on prices. Cheers guys

Does anyone know if it’s possible to buy the blade on its own? My carbon one has cracked down the full length of the blade?

Yes Oem only Harry

I’m looking at buying a new oem gear knob from amayama but before I do i thought I’d see if anyone had a good one lying around?

Grab handle or wheel clamp? Iv found that the grab handle is cheap to buy new (only £20 odd inc delivery from amayama )

Thanks mate let me know also looking for a spare wheel holder/clamp

Anyone have the grab handle and lower clip mine had been glued on.

Has anyone got the 2 retainers for the upper part of the mouth of the bumper before I order off amayama the 6 x clips would be a bonus [ATTACH=CONFIG]229202[/ATTACH] [ATTACH=CONFIG]229203[/ATTACH]

I’m going to drop it out, this is why I don’t let anyone touch my cars! Will it cause any seal damage etc if I left it until the weekend? It’s not being driven.

Iv just been told the garage has put ATF in my w58 gearbox does this need removing immediately, what harm will it cause?