Simo2007
-
Posts
205 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Simo2007
-
Will do mate! My apologies I said rotas of course they’re the B1s. My last hope haha!
-
Honestly if I can do it anyone can. It’s plug and play with the piggy back fuse holder and you’ll need to make 1 crimp which is pre installed.
-
I think it’s very good at night. See what you think. I did yeah, piece of cake, just get a piggy back fuse holder and find a 12v switched live and you’re in business.
-
Yeah both are. Both are crystal clear, here’s an example of the image quality. Front is 1080p rear is 720p If I recall correctly.
-
DR650-S 2CH on the soop and DR650-GW 1CH on the 306.
-
Can confirm Blackvue are fantastic, been running them for years.
-
Thanks Paul, we chatted on facebook last week about your wheel offsets on the rotas, will you still be okay to grab them when it gets done? Be keen to hear your thoughts on the BC’s too!
-
-
-
Forgive me for perhaps a silly question, but are you guys running the BC Racing BR series coilovers, the ones with the type RS rubber top mounts like in the link below? http://garagewhifbitz.co.uk/bc-racing-3131.html
-
Would highly recommend Blackvue, I've got a single front cam in my daily and I've got the front and rear cams for the Supra. GoPro on the motorbike too, never know when you might need them!
-
Following this as I'm going to change mine in the near future too.
-
As someone who has the (mis)fortune of having to use the A1 and north circular on a daily basis, the state of peoples' driving never ceases to amaze me. Glad you reported them, hopefully you had dash cam footage to show too. Sometimes I do think self driving cars do have a place in the world to reduce instances like this. Make sure you put it on here too https://rate-driver.co.uk/
-
Do you know who to speak to in order to get the join request approved on the mkivsupra facebook group? Mine's been pending for months
-
Messaged him on the 23rd October and said they were sold, I’m messaging him again just in case but any other sources for stock wheels Ric?
-
Bump again, Keron is keeping the ones he’s got.
-
Thanks mate just dropped him a WhatsApp.
-
I actually haven’t seen any apart from one set in Belgium on Facebook, would you be able to point me in the right direction?
-
Since I'm not having any luck finding the wheel design I want to fit under stock arches, I'm still on the lookout for some stock 17's, so bumping this again!
-
Bumping this again, still looking for one!
-
By any chance do you still have this for sale? I've sent you a PM.
-
Minor update, I've reached out to a few people on Facebook... One chap running 18x9.5J ET30 front with 265/35/18 which clears 8 pot brakes fine and no spacers, 18x10J rear with 285/35/18, but rolled arches due to tyre widths. Trying to establish whether I'd get away with the above fitments but with 245/40/18 on the front and 275/35/18 on the rear... Or whether to just buy Josh's BBS LM's for sale
-
Yeah as I mentioned in my initial post, the 8.5J that are definitely compatible don't have the concave effect as in the first photo I posted. For anyone following this thread, I've had 2 updates regarding the ET38 and a ET35 9.5J Rota Grid Drift on the front; they don't require an arch roll, but they do both require a 5mm spacer to clear the bigger front stock brakes. Correct me if I'm wrong, but ET38 + 5mm spacer = ET33, and ET35 + 5mm spacer = ET30, this is where my logic is arising from using an 18x9.5J ET30 if anyone was wondering...
-
Really appreciate your efforts Frank, thank you, but he states 'Car still needs the arches rolled so not moving it until that's sorted.' in post 14. I've tried to message him on Insta so hopefully I hear something...
-
Yeah I'm completely aware of the fact the spoke design is important hence I'm after the Rota Grid Drifts to encompass larger brakes, however the offset is important to me as I don't want to roll the arches! Ah yes I have to use the .co.uk extension for the forum so it doesn't come up in VBB format! Link works fine in VBB. That link specifically shows the guy selling them but I cannot find any pictures with them on his car in his previous posts. - - - Updated - - - Yeah this is something I would like to avoid!
