foodfreak

Hi Jamie, I had something similar once with my RPS, it was the pivot for the clutch fork in the belhousing that had cracked. get Lee to have a look through the inspection plate.

How is the racing mole getting on? haven't heard from him in a while, Have a good one Matt

what budget do you have in mind? we did ours 3 months ago, similar size Tiles - 60 x 40 travertine - walls & 20 x 10- floor - £1100 with adhesive & grout -store- Tile depot (were very good, replaced any cracked or miss-matched tiles straight away.) Bath - 180cm x 80cm - £600 (hate small baths) store -Porcalinosa square close coupled Toilet & cistern - £400 ( reduced from £700)- store - B & Q Square sink, wall mounted -£25 - store - bathstore Good quality heavy chrome taps, hidden fittings - £150 per set ( sink & bath) Store - QS Supplies ( online) concealed shower controls - £260 good quailty tiler - £700 - look on tilers forum, plenty of people looking for work with other bits & pieces, plumbing bits, towel rail, bathroom cabinet, ip3 rated ceiling lights, 30mm travetine window sill top, totalled just under £5k & this was with me doing all the plumbing & electrics depends on how far you want to go once we added it all up, we were a bit suprised hope this helps

Mum will be chuffed:D Robert, We really should get a picture of the our three supras together...... I still have a soft spot for that car

Mine.., had a wedding for 200 at Gibson hall.... that part of the city is crap for parking.. car was very dirty as well

F-con has been good on mine for the last 5 years - keep it

try here http://www.mkivsupra.net/vbb/showthread.php?225708-Top-Secret-Bonnet-Water-Channels hope this helps

the flexi hoses from the pump should have closing valves on them.........just turn them a little on the output side to reduce the flow

Has he tried reducing the output on the pump valves to see if the 'hunting' goes away? if it does, the 'feeds are not supplying enough water

in short, yes, you can get a warrix in 1/2 inch. My cylinder had 1/2 inch thread ( which the flange srews into)....my plumber's merchant had to order it it in, took two days 'The plumber said something about needing a 1/2 inch flange instead of the usual 3/4 inch: ' what is he on about?. the flange clearly fits the cylinder o.k as I said before, just make him swap the pipework around.......should be job done shame you're too far from me, I'd do it for you

How did you get on?

http://www.bathroom2u.com/images/large_images/AC403.jpg - surrey flange http://www.plumblineltd.co.uk/image/cache/data/platinum/00001429-001-500x500.jpg - warix flange if you look at the body of the flange, a surrey flange is fixed, the warix body will rotate. it's not very clear in the picture, but it looks like a warix flange to me............just get the pipework swapped around, shouldn't take long John

I've recentley install a 1.5 bar shower pump with the same flange. no problems with 'hunting' or air being drawn in. As previously stated, the shower feed must come from the top outlet. The top outlet has a dip tube that goes down inside the cylinder to prevent air being drawn in. you do not need a 'u' bend in the pipework to the pump. do you have a direct independant cold feed from the water tank to the shower pump? if not, the flow rate of the pipe work may be insufficient if both the cylinder( hot) & the cold feeds to the pump are tee'd off together Do not run the pump too long if this is happening.............it WILL b*****er the pump. hope this helps edit......how big is your cold water storage tank? How much 'head' ( above the hot water cylinder?)

have a look here http://www.mkivsupra.net/vbb/showthread.php?225708-Top-Secret-Bonnet-Water-Channels

with the right harnesses it's virtualy plug & play.......ask Dude

My brother has a relatively new Disc 3,- 2 years old......had no end of electrical gremlins, be better off with the landcruiser Jamie

Very good toys....easy to maintain / fix if you break them out handles almost everything on the road, not too slow if you run an engine at around 270 bhp ( tuned Vauxhall or K series Lump)

I'll take the seats Dave,

The 6262 is very nice Dean:D

anyone want to start a book on how long it stays at bpu:D:D

Brazil, I'll try for you. He might remember. I think Mario is working somewhere else, I'll find out

Bad news chaps, Gvn is no more. very sad for Gerald, he was badly 'screwed' by his landlord, which put him out of business. I have the number for Richard( the guy who did the spraying at GVN, pm me for details)

At my age, one birthday a year is enough thanks:D

if she is a maine coon / cross she'll grow very fast, eat a lot & like very high places. they're fantastic hunters, so if you're going to let her out, expect lots of 'presents' brought back for you:) Our boy is only 1 year old but already is nearly 7 kilos, he's got 2 years more growing to do yet, lol hope you enjoy her for a long time

that looks very much like a Main coon (which are quite expensive cats) with the ear tufts & classic 'm' on the forehead. if it is, the could end up being a very nice natured (and large) cat It's appaling that someone can be so cruel.