Jump to content
The mkiv Supra Owners Club

Lude

Followers
 View Profile  See their activity

  • Posts

    1649

  • Joined

 Content Type 

Everything posted by Lude

  1. Lude
    you would have thaught that Rota would have copied them?
  2. Lude
    sorry dude i do try to explain but its difficult when typing, havent used any txt speak in the post tho? if you can PM me where have etc rarther, as like to keep the thread on topic... nice1 EDIT: only way i can describe further is that i have joined the resivour to the pump, with new pipe. i have oil leaking where the pipe meets the pump, i have jubilee clipped the pipe to the pump, do other people use a special sealer to prevent the fluid dribbling out the pipe onto the pump..
  3. Lude
    ive got a replacement pipe to go from the PAS to the resivour, PVC, 16mm got a jubilee clip each end done up TIGHT. there is a bit of fluid still seaping thro tho i beleive, as the pump has some oil on. whats the best way/product to stop this? spoken to member who advised just put some sealer on the base of the pump where meets the pipe, (thanks again pedrosixfour anyone got any products/methods to cure this leak?
  4. Lude
    just switched this today, new pipe looks great however iv notived that the other pipe is split also (the top pipe that goes to the cooler) blumin shame they are different sizes as i could have done em tonite. gonna order the other pipe, nice long one so goes straight to the cooler (currently at the mo its 2 short ones with a joiner) anyone know the diameter size required? ive got the old pipe off & will measure it, but wana make sure got it right (as the end is bit split/stretched) i make it 12mm?
  5. Lude
    EDIT: just saw your the other end of the world lol they are not special bolts im sure you could get them where you are
  6. Lude
    ok thanks dudes, hoping my replacement pipe arrives today, will report back, if its dead il just get it refurbed chris
  7. Lude
    i have a split pipe & leaking fluid, i have gaffa taped up the pipe as best as i can until the replacement pipe arrives (today hope!) and have kept topping up the fluid each day. today tho iv topped it with fluid, and bled it, but its still doing the whine when turn the wheel. is this the pump now dead? or isit just possible air getting in thro the split pipe & will be ok when got new pipe & bled it?
  8. Lude
    how are the ebay bosses crap? i would have thaught it be difficult to mess up such a simple part lol
  9. Lude
    you dont want to get a large steering wheel, smaller the better i find. most aftermarket ones are 330-350, ive got a Personal Grinta on mine, its a 350 feels loverly however i have just ordered a JDM tyte white one you want one that feels & looks good. my personal wil be up for grabs soon
  10. Lude
    think they are just verify light anyway tbh
  11. Lude
    bumping this as going to do mine on the weekend think, i want to go over mine in silver, to freshen it up, and then also want to put a GReddy logo on, scott, you said normal paint is what you used, so can anyone else confirm this? dont need heat resistant paint do you? (not sure how hot the IC gets?)
  12. Lude
    sliping? itle be clampt on, or do you mean splitting. seller advised this is the one i need http://www.ebay.co.uk/itm/290564402307?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
  13. Lude
    yea theres a pirtec local to me, i have put a reuest in the wanted section, this on ebay? http://www.ebay.co.uk/itm/16mm-5-8-CAR-HEATER-COOLANT-RUBBER-HOSE-SAE20-R3-C-PIPE-/260445837360?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3ca3c81830 have emailed them to see if its oil resistant....
  14. Lude
    theres a B&Q & Leeks right round the corner thats all, convenience, if they have it that is
  15. Lude
    thanks mate, will leeks/B&Q stock this? will have a look later its gotta be cheaper than toyota
  16. Lude
    seems there is space there, i was thinking of just getting any pipe and cutting it to fit, could get 17mm pipe & just jubilee clip it on, as its not high pressure or anything at the resivour, but must be oil resistant ye? thaught any rubber will do?
  17. Lude
    want to paint my Trust/greddy FMIC, want to have the greddy logo on, was just gonna stencil some paper & paint it on. do i need special paint? also can i give it a quick once over in silver to sharpen it up? or will this mess it up? like this for example
  18. Lude
    mine has split and leaking flduid, rarther than removing & draiing all my fluid & measuring, wondered if anyone knew, so i can just get the new pipe straight away,
  19. Lude
    mine is brittle & split, anyone got one with no splits/holes? EDIT: no longer required
  20. Lude
    yep rare ish lol, well difficult to obtain at least! will go with my white supe
  21. Lude
    ah great lol bugger, never mind, its super rare and hard to get so im ok. and its only a small amount aye 50 quid so even if i do get taxed hopefully itl be a low amount PS for those who wondered i bought this [ATTACH=CONFIG]137423[/ATTACH]
  22. Lude
    just baught a steering wheel from japan, only cost me 39 UK pounds + £11 uk pounds delivery. now ive just thaught about TAX
  23. Lude
    thats gutting sorry dude
  24. Lude
    ok cheers. have just found one on ebay japan, will PM him tho..
  25. Lude
    after a white JDM steering wheel, but im having great difficulty finding one, anyone recomend anywhere/anyone who can sort rare parts out? like this http://images106.fotki.com/v508/photos/4/43405/5358257/IMG_2405-vi.jpg
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.