V

Yup. Still on the no side at the mo Regards Stephen

I'm a maybe, leaning towards a no i'm affraid.

Alex, Your first thought about my revs on my car might be right :( I'm seeing Ian Sunday to have a look to make sure. Are you at the meet too? Gaz, You have an e-mail soon. PS. got to be refined. none of this clanking about. Basically an uprate stock one. Regards Stephen,

Thanks Zed. CW is on list my list of people to call I assume theres no real difference of feal & noise from that of the standard one? I'm now reading all the posts on clutch's. Regards Stephen

I may need a new one. My car was registered in Japan Nov 2000 and now done 37k – is it normal for one of these to go in this time? I know very much it depends on how its driven, but just broadly speaking. What are my options, cost and what power can they take for everyday use. Standard Toyota one? Plus any difference between UK and Jspec? Others? My cars standard apart from a cat back exhaust (300bhp at the hubs), but am looking to go no more than hybrids in the near future. My cars still under warranty, so I’m looking at going down that route. Any thoughts? Many thanks Stephen V

Your still here then

. millhouse 2. Bobbeh 3. Ray Cunliffe 4. Sherriff 5. Justin (If turbos survive TOTB. Ehm, if I can get my new Supra) 6. Barney (If my car is finished) 7. Supra66 8. The Envy lot 9. Gordon F 10. Graham S(no puking up this time) 11. CJ 12. Paul_y3k 13. leett 14. Ian S. 15. TLicense 16. Halo Inc 17. Nic_F 18. NEO 19. .......................................... SPARE 20. jusie 21. lotus 22. SupraStar 23. supradibbs (work permitting) 24. Martin R (work permitting) 25. Ian R 26. Branners (car permitting) 27. Dude ( the brighton belle) 28. Steve M (need a lift now though, supy sold) 29. Bill Prawn (possible, maybe). 30. Bammbamm 31. Kopite (if i got the supe out of the bodyshop by then ) 32. Vaughany (Work Permitting) 33. Matt Harwood (Clutch/lazyness permitting) 34. Cashpoint (clutch permitting) 35. Gatso & Soo 36. MONKEYmark (car permitting) 37. SimonB 38. Hy-Performance (Chris) (Work, Clutch and Car permitting lol) 39. Adam Fennell Sorry, cant make this one so will have to drop out

Depending upon the quatitiy run its about £3m2 for the paint and application.

Sorry I was talking bollox. You cant get ppc in a clear, well at least not in an architectural finish. Partly because when you pre-treat the aluminium before application it goes a shity yellowy green colour which most architects dont like plus the pigment is used to offer part of the protection. The polyester powder coat is baked on at 200 degrees, but is guaranteed upto 120, although once set it wont melt again, but it does burn/char. At 200 degrees you should be ok, but near 300 it will start to discolour and eventually burn off (class 0 spread of flame – ie. it doesn’t catch fire) Depends on what you want to finish but I would suggest Plasticote Clear Enamel which I think is ok for upto 400 degrees I think, and they even do a stove enamel for 600 degrees. B&Q sell it. God knows what myt Alien is finsihed in then Regards Stephen V

I work for one of/the the largest UK architectural glazing companies with our own powder coating plant. Clear is not a problem (i've got a metal alien clear powder coated ) , its just un-common and you have to buy a bag of powder which is about £80+. I'll check the heat it is stable at. Paint manufacuters: These 2 are the biggest/best: http://www.synthapulvin.co.uk/ http://www.interpon.co.uk Others: http://www.omegacolours.com/ (same as synthapulvin but cheaper) http://www.hbfuller.com They will be able to give you a list of approved applicators, although you might find it cheaper from a smaller local company. Heres a few applicators to get going with: Barley Chalu 01953 602 771 Metallic Protectives 01926 491 811 Metalion 0208 965 4677 Supreme 01203 644 120 Maybe able to get something sprayed up at our works but i'll have to check, as we run batches and to do a one off small item is a pain - hence why most applicators probably shy away from it. I'll post back with the temp. Thought about anodising??? Regards Stephen

You just copy & past:- 1. millhouse 2. Bobbeh 3. Ray Cunliffe 4. Sherriff 5. Justin (If turbos survive TOTB. Ehm, if I can get my new Supra) 6. Barney (If my car is finished) 7. Supra66 8. The Envy lot 9. Timwildman 10. Graham S(no puking up this time) 11. CJ 12. Paul_y3k 13. leett 14. Ian S. 15. TLicense 16. Halo Inc 17. Nic_F 18. NEO 19. V 20. jusie 21. lotus

reletively :conf:

1. millhouse 2. Bobbeh 3. Ray Cunliffe 4. Sherriff 5. Justin (If turbos survive TOTB. Ehm, if I can get my new Supra) 6. Barney (If my car is finished) 7. Supra66 8. The Envy lot 9. Timwildman 10. Graham S(no puking up this time) 11. CJ 12. Paul_y3k 13. leett 14. Ian S. 15. TLicense 16. Halo Inc 17. Nic_F 18. NEO 19. V

Any date so long as its sunny 1. Heckler 2. MR.B (Dark Pencil) 3. Darren Blake 4. V 5.

Good to see things happen pretty quick for you Glad your back. We need some pics, cant wait until the next meet. Regards Stephen V

Good food, lovely weather, nice people . Glad to meet you all. Regards Stephen & Jo

Anymore? Hope the weather is going to be ok. One channel said fine with sunny bits, the other said rain - typical. Regards SV

Thank you

Mine knocked a bit too, although i dont know if its the Rubbers, the Latch or the Suspension. Just received the bottom boot rubbers this morning:D Did you adjust the latch in the boot, or can you adjust it from under the drivers seat for the amount engagment on the latch, as mine doesnt seem to pop-off the latch from the lever by the drivers seat. I padded out the boot blocks (top bit) and it work ok for a while but now back to normal. Regards SV

check out: http://www.mkivsupra.net/vbb/showthread.php?threadid=16519&referrerid=635 Regards SV

Retractable mirror switch, which has always been available. Regards Sv

Heckler Darren B 250 Secondjump V I'm a very very more than likely, nearly certain, almost there. Unless i get struck by lightning or the wife i'll be there Cheers SV

Justin, so sorry to here the bad news and just hope it gets resolved quickly for you. Best Regards Stephen V

I first thought that said your filming a porno....... never mind. Just checking if i'm free on that day, its not too far from me. EDIT: Its a shame there's not pay on the day for spectators. Cheers SV

Really late in the day now, but i've only just found this. Anyone else going? Cheers Stephen V