bromy
-
Posts
2100 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by bromy
-
What the F*** is that abortion of a fuel system.
-
As Wez said John, headlight intake just like the one you had on the silver car. Not seen them around for years
-
Not sure on the torque but it has the standard n/a non-lsd, first and reverse can be difficult to select sometimes but this is apparently quite common with the RPS clutches. I think it is a bit of a lottery whether or not the W58 box lasts or not.
-
1.2 bar on a T61 with a RPS clutch OK so far.
-
10 years in with voda and no problems.
-
Vodafone here and dont want to leave, Australia have the iphone on Vodafone
-
Sad news here too, we make engine pylon brackets that attach the engine nacelle to the wings for the long range Airbus
-
When Cameron was in Egypt's land....let my Cameron go.
-
http://www.salfordsmotorcycletraining.co.uk/pricing.html
-
You are probably looking at a seized caliper, most garages will be able to re-furbish it for you or look here http://www.mkivsupra.net/vbb/showthread.php?t=64963&highlight=urgent+caliper for a guide on how to do it. Where in Cheshire are you?
-
Does your alloy feel hot after a drive?
-
I work in Dukinfield and was driving through Hyde at about 17.45 tonight but mine is Quicksilver and OEM wing
-
Bump
-
Had a RPS clutch fitted last week with a new OEM thrust bearing, I was not happy with the bearing that was fitted as it was as squeaky/rattly so I took it back and they fitted another, I picked the car up yesterday and for around 20-30 miles no problem but again the squeak/rattle has returned. The noise does go away when the clutch pedal is slightly pressed so I do think it is the bearing, but what is causing the bearing to make the noise/fail? Surely I cant have had two duff bearings and I do believe the work has been carried out. Could it be a problem with any other parts i.e release fork
-
I'd try Supraforums in the N/A section or club na-t, I'd be very surprised if you found one here.
-
I'll take it Jody, give me your paypal address.
-
I did have to alter the boost controller back a touch, it had crept up by 0.15 bar;)
-
Had it made here http://www.jpexhausts.co.uk/ You can basically tell them exactly what you want, I asked just for the rear box. It came in at a reasonable 380+vat which I think is very good.
-
Had a custom exhaust made and fitted earlier this week and am really happy with it...... I have a 3" downpipe from the turbo so I got it made with 3" pipe straight through and it has a section so I can slip a cat back in for the MOT, cant believe how much quicker the turbo seems to spin up.
-
Get them on ebay, I want a bargain
-
Done right it should be a nice drive, just get the issues sorted and dont run silly boost.
-
Jesus, Bradb
-
http://www.saic-uk.co.uk/products.php?parent_cat=Metal&cat=Coated%20Abrasives&cat_id=5&product_name=Aluminium%20Oxide%20Quick%20Release%20Discs&product_id=103
-
How many you need?
-
Ooops! We make the pylons that hold the engines to the wings for Airbus