Suprakeith

Thank you will have look through that

Thank you for that, I will have closer look at old connectors see if can find any numbers

Am after some help with part numbers please, my tweaked new loom has two wrong fitted connectors and would like to get the right ones from Toyota and change them over. Car is 94 na jspec, 1st one is the oil level sensor connector..pic of old one on damaged loom 2nd one is the ignition coil connector Again have picture of old one on damaged loom Any help would be really appreciated

They are currently building me a custom na-t wire loom, did lots of research and heard so much good positive things about the company. My loom should be finished very soon

Ouch, that means uploading everything to tablet and uploading all the pictures again. Going to take ages but guess be worth it.

How do I upload then to the forum please, as use my phone with Tapatalk app to access forum and update build thread?

How do I upload then to the forum please, as use my phone with Tapatalk app to access forum and update build thread?

How do I upload then to the forum as use my phone with Tapatalk app to access forum and update build thread?

Well thank you for that, I thought all my pictures were uploaded to forum, I have used Tapatalk app for whole thread

Apology for what [emoji4][emoji106][emoji23][emoji23]

I am currently doing na-t build using GE block and GE head and have fully forged block and built head which is capable of 1800bhp. It’s cost quite a bit and taken two years but have done 99% of it myself

Yea it’s meant to work to work like that but the mods can’t be bothered to move build threads from supra chat to project thread

Well thought would update this to help other members, Toyota no longer sell the GE engine wire loom. Haven’t had any luck finding 2nd wire loom, But have found company in states called Tweak’d that do 2jz looms plus custom 2jz looms, so will be getting a custom 2jz-ge loom from them.

Based is Peterborough bud

Very unlucky for sure, just one of them unfortunate things

Yea I think the trickle charger wire caught terminal while alternator cable was touching the body work and caused the short. And it’s $1400 so just over £1000, I just waiting for it to turn up now, when does will post plenty pictures of it up.

Final bump...have Scuttle panel Dizzy Na viscous fan Both arms left £50 collected for all above, if get no interest will just throw away

Well had a little accident last weekend while replacing alternator, some how I managed to melt part of my wire loom. Did disconnect battery but think one of the trickle charger wires touched while squeezing alternator into position, had quite abit of smoke and checked all my power steering wires are fully burnt out and snapped plus part of loom behind cam verniers also melted, was very lucky car didn’t go up in flames. So after looking at all options have decided to have brand new custom loom made by Tweak’d performance in USA. So this weekend have focused on removing old damaged loom out car so can tidy up few bits while wait for new loom to turn up. Didn’t think would have to strip so much but at least it’s done now. Also managed to remove my Bee R Rev limiter as don’t need that as have my link ecu.

Great workmanship, love the way she looks at the rear

Didn’t relise was two separate looms but just to be safe I want to replace both as don’t want to risk it and have future problems, i will pm you my phone number mate

I need the complete engine bay loom from ecu, And I had smoke from hot side wire loom plus for the bit that goes behind cam verniers, when checked all the wires were melted and just fell apart when touched them

Hi guys had bit of accident today swapping alternator over and caught the wires and melted my wire loom, I had disconnect battery but think when squeezing alternator in pulled the wires and somehow they bridged and wire loom started smoking, checked loom wires and loads of them are burnt and melted. So am after a new one please, if anyone has the Toyota part number for 2jz-ge Manual Engine loom that would be massive help or knows of company that make them please, Have searched online and all can find is companies making new GTE looms. Am hoping can get new loom so can finish my build and get car back on road again