Crash Bandicoot Posted December 19, 2013 Share Posted December 19, 2013 Hi guys, just wondering if anyone can give me info on what is needed to delete the air con? Link to comment Share on other sites More sharing options...
Dan_Q Posted December 19, 2013 Share Posted December 19, 2013 i'm pretty sure this one has lots of good info on a search- did it myself a while back. i'll hopefully be doing mine in the new year- not a total stripout but just a few engine bay bits. the main point i remember is that the cradle that the aircon pump sits in also braces the PAS pump. you an either knock up an alternative or take the AC pump from the cradle and just fit that on its own. after a lick of green paint of course the threads on the search also have the part number for the shorter aux belt you'll need. Link to comment Share on other sites More sharing options...
Crash Bandicoot Posted December 19, 2013 Author Share Posted December 19, 2013 I've done a search on the forum, don't know if its just me being a dumbas* but I can never get good results when I use the search bar :/ Link to comment Share on other sites More sharing options...
ashbuster Posted December 19, 2013 Share Posted December 19, 2013 hi bud ive put an arrow by what you need strip the aircon down and keep this part then you need a belt like this http://www.garagewhifbitz.co.uk/index.php/garage-whifbitz-1094.html Link to comment Share on other sites More sharing options...
Dan_Q Posted December 19, 2013 Share Posted December 19, 2013 nice post ash. just did a quick search think this is one of the threads I read: http://www.mkivsupra.net/vbb/showthread.php?266866-The-proper-way-of-deleting-the-air-con-pump&highlight=aircon+removal Link to comment Share on other sites More sharing options...
Crash Bandicoot Posted December 19, 2013 Author Share Posted December 19, 2013 Cheers ash, will be easy to do while the engines out then what about the firewall side of the air con? Do you just bung it? Link to comment Share on other sites More sharing options...
ashbuster Posted December 19, 2013 Share Posted December 19, 2013 no worries. ive left that part in on mine and im going to bung it Link to comment Share on other sites More sharing options...
Crash Bandicoot Posted December 19, 2013 Author Share Posted December 19, 2013 Okie dokie any ideas on what to bung it with? I'm thinking I'm going to make a couple plates with the bolt holes and sealing it on, that way it can be used again if needed. Link to comment Share on other sites More sharing options...
Crash Bandicoot Posted December 19, 2013 Author Share Posted December 19, 2013 Can someone send me a link for the shortened belt for when I remove the air con pulley? Link to comment Share on other sites More sharing options...
FOSTA Posted December 19, 2013 Share Posted December 19, 2013 Ash what the hell is that in the background?!!!! :O Link to comment Share on other sites More sharing options...
Kaan W Posted December 19, 2013 Share Posted December 19, 2013 Ash what the hell is that in the background?!!!! Link to comment Share on other sites More sharing options...
Crash Bandicoot Posted December 19, 2013 Author Share Posted December 19, 2013 Ash what the hell is that in the background?!!!! :O Lol indeed!! But seriously, does anyone have the link to the shortened belt. Or know where I can get one? Link to comment Share on other sites More sharing options...
Rich.2211 Posted December 19, 2013 Share Posted December 19, 2013 Ash what the hell is that in the background?!!!! http://i206.photobucket.com/albums/bb161/jamielfoster86/D542694D-C65D-44FB-9F5D-7698070784C4_zpsxre2zfvw.png :O That's the handle on my engine stand you tard! It allows you to spin the engine whilst bolted up to the stand. Link to comment Share on other sites More sharing options...
Crash Bandicoot Posted December 19, 2013 Author Share Posted December 19, 2013 Read a few threads on this now, is it possible to leave the aircon ports open, remove the condenser/rad and all pipe work and leave the pump in place and keep the long belt?? Link to comment Share on other sites More sharing options...
Kaan W Posted December 19, 2013 Share Posted December 19, 2013 You can leave the ports open, but I would remove the pump if your gunno not have aircon. Ashbuster posted the link above for the shorter belt from whifbitz. Pk1865 iirc. Link to comment Share on other sites More sharing options...
Crash Bandicoot Posted December 19, 2013 Author Share Posted December 19, 2013 Ah, just found the link Link to comment Share on other sites More sharing options...
FOSTA Posted December 19, 2013 Share Posted December 19, 2013 That's the handle on my engine stand you tard! It allows you to spin the engine whilst bolted up to the stand. Ha ha ha the handle on my engine stand is more manly, just a cold bare metal pipe with worn paint! You blatantly sit on yours! Link to comment Share on other sites More sharing options...
DodgyRog Posted December 20, 2013 Share Posted December 20, 2013 This shows the bracket you need to keep off the front of the Aircon pump that we discussed last night bud http://www.mkivsupra.net/vbb/showthread.php?266866-The-proper-way-of-deleting-the-air-con-pump&highlight=aircon+removal Link to comment Share on other sites More sharing options...
ashbuster Posted December 20, 2013 Share Posted December 20, 2013 Can someone send me a link for the shortened belt for when I remove the air con pulley? link is in the previous post by me bud with the pic of the bracket just click the no aircon option before buying and i must admit rich, i did think you had a dildo on the bench when i looked at the pic, mine is just a bar too and not a multiple use item like yours Link to comment Share on other sites More sharing options...
Dan_Q Posted December 22, 2013 Share Posted December 22, 2013 You can leave the ports open, but I would remove the pump if your gunno not have aircon. Ashbuster posted the link above for the shorter belt from whifbitz. Pk1865 iirc. yep, and if you ebay that part number they are about a tenner delivered. fit zafira's and stuff. I think I picked up a dayco one for about 6-8 quid. my engine stand feels inadequate too no such attachments. Link to comment Share on other sites More sharing options...
ashbuster Posted December 22, 2013 Share Posted December 22, 2013 Lol Link to comment Share on other sites More sharing options...
Pig Posted December 22, 2013 Share Posted December 22, 2013 If this is a road car think twice about removing the A/C - When I was considering doing this a few yrs back I spoke to people that had done it and really regretted it! Link to comment Share on other sites More sharing options...
Crash Bandicoot Posted December 23, 2013 Author Share Posted December 23, 2013 Less weight = better power/weight ratio Link to comment Share on other sites More sharing options...
Guigsy Posted December 23, 2013 Share Posted December 23, 2013 Yeah. That you won't even notice. I hate a car without ac. Link to comment Share on other sites More sharing options...
ashbuster Posted December 24, 2013 Share Posted December 24, 2013 i never used mine, just open the window? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now