C_Strike Posted May 17, 2011 Share Posted May 17, 2011 After Jafest and seeing a celica paintined with nothing more than hammerite spray cans or something, i was actually impressed with the results. Iv decided im going to paint my bonnet this method. Black with a matt finish. Pretty sure i remember someone here doing their whole supra this method... Evin was it? Eitherway, iv just a couple of questions. Do i need to sand the bonnet first? I can then sand out the stone chips on it if so, or will it give me a different finish than if i just sprayed it? I assume the paint would have issues sticking to the gloss laquer of the bonnet currently without sanding. Also, would it be wise to primer it before painting? It would save me a load of cash doing it this way, and the results on the celica were pretty much the results id like, no spray lines and such so id get the desired result for a fraction of the price. Its a temporary thing as i am going to get my car vinyled or resprayed somepoint anyway. i just like tinkering:P Any help or advise on painting the bonnet with black matt spray cans would be appreciated, buff as it sounds lol! Link to comment Share on other sites More sharing options...
JustGav Posted May 17, 2011 Share Posted May 17, 2011 hmmmmm...... And this will just go WAY off topic Speak to EvinX, he did his car Link to comment Share on other sites More sharing options...
neilp9876 Posted May 17, 2011 Share Posted May 17, 2011 If you just want a matt black bonnet why dont you just use a vinyl wrap, its not that hard to use and you can remove it again when you want a change? Link to comment Share on other sites More sharing options...
marc_p Posted May 17, 2011 Share Posted May 17, 2011 Please don't Link to comment Share on other sites More sharing options...
j_jza80 Posted May 17, 2011 Share Posted May 17, 2011 After Jafest and seeing a celica paintined with nothing more than hammerite spray cans or something, i was actually impressed with the results. Iv decided im going to paint my bonnet this method. Black with a matt finish. Pretty sure i remember someone here doing their whole supra this method... Evin was it? Eitherway, iv just a couple of questions. Do i need to sand the bonnet first? I can then sand out the stone chips on it if so, or will it give me a different finish than if i just sprayed it? I assume the paint would have issues sticking to the gloss laquer of the bonnet currently without sanding. Also, would it be wise to primer it before painting? It would save me a load of cash doing it this way, and the results on the celica were pretty much the results id like, no spray lines and such so id get the desired result for a fraction of the price. Its a temporary thing as i am going to get my car vinyled or resprayed somepoint anyway. i just like tinkering:P Any help or advise on painting the bonnet with black matt spray cans would be appreciated, buff as it sounds lol! You risk causing expensive 'damage' and destroying any resale value the car may have. Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted May 17, 2011 Share Posted May 17, 2011 oh dear god! evinx will cum himself Link to comment Share on other sites More sharing options...
scotty71 Posted May 17, 2011 Share Posted May 17, 2011 oh dear god! evinx will cum himself lol and at any hammerite job that isnt "under" the car Link to comment Share on other sites More sharing options...
3LL Posted May 17, 2011 Share Posted May 17, 2011 theres being innovative and unique then theres going to far. I hope you change your mind!! Either way though pop some pics up!! Link to comment Share on other sites More sharing options...
The Raven Posted May 17, 2011 Share Posted May 17, 2011 This is a very bad idea Link to comment Share on other sites More sharing options...
Robzki Posted May 17, 2011 Share Posted May 17, 2011 I think the whole hammerite technique has been done to death now, have you considered a nice sandtex or Dulux weathershield? they are both exterior grade and the sandtex can give a nice textured finish. They can be applied by brush or roller to save on all that 'diy' rattle can bodging. If you really want to go to town, then Dulux 'Once' is highly recommended on the saxo forums good luck Link to comment Share on other sites More sharing options...
JustGav Posted May 17, 2011 Share Posted May 17, 2011 I think the whole hammerite technique has been done to death now, have you considered a nice sandtex or Dulux weathershield? they are both exterior grade and the sandtex can give a nice textured finish. They can be applied by brush or roller to save on all that 'diy' rattle can bodging. If you really want to go to town, then Dulux 'Once' is highly recommended on the saxo forums good luck Or plastikote texture.... can just imagine the insurance claim 'So sir, how exactly did you get gravel rash going OVER the top of someone's car'.... Link to comment Share on other sites More sharing options...
Matt H Posted May 17, 2011 Share Posted May 17, 2011 hammerite - whoa, oh oh Link to comment Share on other sites More sharing options...
jackso11 Posted May 17, 2011 Share Posted May 17, 2011 just get the brush on hammered finish, that will add the most value to the car. You can tell all your mates you had it wrapped in a giant black orange peal. Link to comment Share on other sites More sharing options...
Dnk Posted May 17, 2011 Share Posted May 17, 2011 You risk causing expensive 'damage' and destroying any resale value the car may have. He's only going to paint the bonnet £300 gets it properly painted in any colour he likes so hardly expensive to put it back to stock Link to comment Share on other sites More sharing options...
Dnk Posted May 17, 2011 Share Posted May 17, 2011 This is a very bad idea and cutting holes in your bonnet is a good idea ? Link to comment Share on other sites More sharing options...
j_jza80 Posted May 17, 2011 Share Posted May 17, 2011 He's only going to paint the bonnet £300 gets it properly painted in any colour he likes so hardly expensive to put it back to stock I'd consider £300 expensive. He could get a wrap done for £200. Link to comment Share on other sites More sharing options...
Robzki Posted May 17, 2011 Share Posted May 17, 2011 Or plastikote texture.... can just imagine the insurance claim 'So sir, how exactly did you get gravel rash going OVER the top of someone's car'.... made me giggle Link to comment Share on other sites More sharing options...
d-_-b Posted May 17, 2011 Share Posted May 17, 2011 +1 for the vinyl wrap idea. much better as will give a better finish, look just as good & be removable if wanted. Link to comment Share on other sites More sharing options...
Robzki Posted May 17, 2011 Share Posted May 17, 2011 After Jafest and seeing a celica paintined with nothing more than hammerite spray cans or something, i was actually impressed with the results. Iv decided im going to paint my bonnet this method. Black with a matt finish. Pretty sure i remember someone here doing their whole supra this method... Evin was it? Eitherway, iv just a couple of questions. Do i need to sand the bonnet first? I can then sand out the stone chips on it if so, or will it give me a different finish than if i just sprayed it? I assume the paint would have issues sticking to the gloss laquer of the bonnet currently without sanding. Also, would it be wise to primer it before painting? It would save me a load of cash doing it this way, and the results on the celica were pretty much the results id like, no spray lines and such so id get the desired result for a fraction of the price. Its a temporary thing as i am going to get my car vinyled or resprayed somepoint anyway. i just like tinkering:P Any help or advise on painting the bonnet with black matt spray cans would be appreciated, buff as it sounds lol! What is wrong with your bonnet as it is? Link to comment Share on other sites More sharing options...
jackso11 Posted May 17, 2011 Share Posted May 17, 2011 if you want it matt, vinyl wrap is your friend. Link to comment Share on other sites More sharing options...
Matt H Posted May 17, 2011 Share Posted May 17, 2011 I think the wrap idea is pretty decent. Then you if don't like you can just peel it off (for resale perhaps) Link to comment Share on other sites More sharing options...
Josh Posted May 17, 2011 Share Posted May 17, 2011 I'm not a fan of the 'black bonnet on different coloured car' look but if you do it, get it wrapped and see what you think first Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted May 17, 2011 Share Posted May 17, 2011 I'm not a fan of the 'black bonnet on different coloured car' look but if you do it, get it wrapped and see what you think first hodges is the bollox with that look Link to comment Share on other sites More sharing options...
Josh Posted May 17, 2011 Share Posted May 17, 2011 hodges is the bollox with that look *stand corrected* Good call. Hodge's is the b0ll0x Link to comment Share on other sites More sharing options...
marc_p Posted May 17, 2011 Share Posted May 17, 2011 hodges is the bollox with that look Hodge's, however, is not Hammerite Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now