Paul Whiffin Posted May 30, 2009 Author Share Posted May 30, 2009 Any pics Paul? I didn't get time today as they were collected to go off to Silverstone. I'll take some tomorrow though. Its not finished off properly yet though, function over style in this case. Link to comment Share on other sites More sharing options...
Luxluc Posted May 30, 2009 Share Posted May 30, 2009 I didn't get time today as they were collected to go off to Silverstone. I'll take some tomorrow though. Its not finished off properly yet though, function over style in this case. Is there a benefit from ducting the air to the air-filter vs having the air-filter located in the front bumper? Link to comment Share on other sites More sharing options...
Paul Whiffin Posted May 30, 2009 Author Share Posted May 30, 2009 Is there a benefit from ducting the air to the air-filter vs having the air-filter located in the front bumper? Never tried in behind the bumper before, I'd imagine it gets very dirty very quickly down there though. Least in the engine bay its easy to remove to clean. Link to comment Share on other sites More sharing options...
Luxluc Posted June 1, 2009 Share Posted June 1, 2009 Hi Paul, how was Silverstone ?? Link to comment Share on other sites More sharing options...
Paul Whiffin Posted June 2, 2009 Author Share Posted June 2, 2009 Pretty good actually, I was 1st and Steve L 2nd in RWD class, I'll start a thread in my section ASAP with a full report, pics & vids. Ta Link to comment Share on other sites More sharing options...
SteveR Posted June 2, 2009 Share Posted June 2, 2009 Nice one (again) boys Now get along to Llandow. Link to comment Share on other sites More sharing options...
Paul Whiffin Posted June 2, 2009 Author Share Posted June 2, 2009 Nice one (again) boys Now get along to Llandow. We'd like to believe me, its just time for us I'm afraid, the week after is Brands Hatch, we've got to do some testing in between now and then as well so its a bit difficult to fit everything in along with having a life! I'll have a word with Steve and see if we can sort something though. Link to comment Share on other sites More sharing options...
SteveR Posted June 2, 2009 Share Posted June 2, 2009 Would be great to see you guys there if you could make it, and thre Friday night at the hotel/pub before is fun too. Link to comment Share on other sites More sharing options...
Paul Whiffin Posted June 3, 2009 Author Share Posted June 3, 2009 Here you go, a couple of pics of the air intakes we knocked up the day before Silverstone. I'll be getting the bonnet intake smoothed in eventually and I'll also make up a proper intake for the pipe jammed in next to the towing eye. Definately works though, we created our own wind tunnel with an air line! Link to comment Share on other sites More sharing options...
MarkR Posted June 3, 2009 Share Posted June 3, 2009 Nice Industrial looking but cool all the same! Link to comment Share on other sites More sharing options...
Paul Whiffin Posted June 3, 2009 Author Share Posted June 3, 2009 Nice Industrial looking but cool all the same! It'll look better when its finished properly dont you worry. Link to comment Share on other sites More sharing options...
Ark Posted June 4, 2009 Share Posted June 4, 2009 Why not fit a filter panel directly to the naca duct, and pipe that stright to the turbo? Link to comment Share on other sites More sharing options...
Paul Whiffin Posted June 4, 2009 Author Share Posted June 4, 2009 Why not fit a filter panel directly to the naca duct, and pipe that stright to the turbo? Good idea but time consuming, complicated and for no real benefit. Link to comment Share on other sites More sharing options...
dandan Posted June 5, 2009 Share Posted June 5, 2009 (edited) Ok, finally got my AP's on..... http://www.garagewhifbitz.co.uk/images/stories/mysuprapics/brakes2.jpg Are the rears fully floating too Paul? Any chance of a photo of the back of this one? Edited June 5, 2009 by dandan (see edit history) Link to comment Share on other sites More sharing options...
Paul Whiffin Posted June 5, 2009 Author Share Posted June 5, 2009 Are the rears fully floating too Paul? Any chance of a photo of the back of this one? No they are fixed and I'm not going to take them off my car to take a photo no Link to comment Share on other sites More sharing options...
dandan Posted June 5, 2009 Share Posted June 5, 2009 OK - just wondered if you have a "pre-fitted" photo Link to comment Share on other sites More sharing options...
Chiefgroover Posted June 5, 2009 Share Posted June 5, 2009 I like the heat shield between the turbo and brake master cylinder, do you sel them or where do I get one like that? Link to comment Share on other sites More sharing options...
Paul Whiffin Posted June 5, 2009 Author Share Posted June 5, 2009 I like the heat shield between the turbo and brake master cylinder, do you sel them or where do I get one like that? I can supply you a sheet of it and you'll then have to cut it to fit your car, its very easy stuff to work with so its not hard to do. Link to comment Share on other sites More sharing options...
Chiefgroover Posted June 5, 2009 Share Posted June 5, 2009 OK let me know the cost posted to N.I. and i'll sort it asap, as i'd like to fit before the engine goes in early next week. Link to comment Share on other sites More sharing options...
Paul Whiffin Posted June 5, 2009 Author Share Posted June 5, 2009 OK let me know the cost posted to N.I. and i'll sort it asap, as i'd like to fit before the engine goes in early next week. You'll need to do it with the engine in place so you know how much clearance you have around the downpipe. Link to comment Share on other sites More sharing options...
Chiefgroover Posted June 5, 2009 Share Posted June 5, 2009 OK how much etc? Link to comment Share on other sites More sharing options...
Paul Whiffin Posted June 5, 2009 Author Share Posted June 5, 2009 OK how much etc? About £40 for the material approx. Best off PM'ing me to keep this thread clean. Link to comment Share on other sites More sharing options...
Paul Whiffin Posted June 16, 2009 Author Share Posted June 16, 2009 Going to Snetterton this evening for a bit of track action, cant wait to get there! Only thing I've changed is the rear tyre size, gone up to a 295/30 from a 285, hoping it wont rub anywhere, soon find out! Got a plan for a new exhaust coming soon, its just to quiet for me! Should be doing something a bit different to the norm on the new one, I can tell you one thing, its going to be titanium and very light. Link to comment Share on other sites More sharing options...
SteveR Posted June 16, 2009 Share Posted June 16, 2009 monster tyres Link to comment Share on other sites More sharing options...
MarkR Posted June 16, 2009 Share Posted June 16, 2009 Got a plan for a new exhaust coming soon, its just to quiet for me! Should be doing something a bit different to the norm on the new one, I can tell you one thing, its going to be titanium and very light. That'll be interesting. Keep us posted I have 285/30 and they do fine. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now