supRo
-
Posts
3171 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by supRo
-
I think the LS400 has them as standard?
-
Wouldn't a stock one show potential problems earlier? The same thing may happen to all rad caps eventually, but on my old TRD one the black rubber piece fell out! I'm using a power enterprise cap at the momemt. Envy have used this for a few years on their car Cheers
-
Hi Hadyn, I'm the same mileage on BPU and can get over 300 miles out of a full tank if I drive like my nan, which I rarely do!
-
He ripped me off with a car with faults and it was dangerous hence I left him bad feedback
-
Don't paint the brake pad surface areas!
-
The bottom of my doors needed the rust sorting out anyway so they grinded the bottom so there's more space. I think they tried adjusting the doors, not sure if you can.
-
Common problem even with OEM Side skirts! I've seen loads of Supras with this problem. I've had my doors grinded down!
-
Cool, give me a shout sometime
-
I would have give you mine in Good condition for 50 squids!
-
Look no further! I have one. The top of the inside has three holes but can easily be taped over and no one will see it. I will have to look for it, it's somewhere in my Luton House. I should be there this weekend. Free to you, of course. Cheers, Ro
-
I doubt any have real functional use! The trial probably causes extra drag if anything unless fitted extremely well and the underneath and around the exhaust areas sealed up properly
-
Use 2K/2 pac paint - the same paint as your car body or heat resistant paint. Cellulose paint will blister
-
Maybe the track wasn't good for big power but the normal cars were getting really good times! Some of the Euro cars were getting better time than Skylines and Supras! There was a stock looking new shape mini, not even a cooper S and that got a 14.0! A corrado got into the 11's! The RX7 with green wheels belongs to my mates friend. He did very well considering that he's not a Tuner and doesn't have any proper sponsorship.
-
I have a J spec early TT airbox with the two air feeds and a brand new unused Toyota air filter that cost about £21. I may have the mounting bolts. One of the hinge on the airbox lid is broken but there is a hole to use a cable tie - doesn't affect functionality. £59 for everything including delivery. PM me if interested. Cheers, Ro
-
I'm with Lancaster and even with two claims the renewal went down!
-
My 1993 J spec BPU TT with 120K on the clock has been valued as £11,750 by Lancaster insurance. I do have about £12-14K of receipts though
-
That's right, it's kg/cm2
-
Hi Mas, It's the front one that needs blocking off as in the thumbnail picture marked with "X" and labelled below: It's the one marked "From Wastegate VSV": http://www.mkivsupra.net/vbb/attachment.php?attachmentid=13934&d=1112558703 Mines just blocked with a short bit of tubing with a bolt stuck on the end! The Wastegate VSV electric plug can be disconnected (I think!). I'll double check everything with you when I get my car back, should be early this week. Ro
-
I had to have rust sorted around the glass so that's why I thought I'd get all the holes filled. It was completely re-sprayed. It was about £400 from GVN - They are expensive but usually do a very good job. Glass needed taking out and new seals.
-
Welded would be best - That's what was done to mines by the bodyshop - did the washer jet hole too. Ro
-
1 mile max! - It just needs moving in and out between forecourt and bodyshop or moved just inside the bodyshop if they have storage space inside!
-
Mate, double check your paint code on the VIN plate
-
Not on a Supra, But I've had two powerflow systems before and so has a mate. Fitment and joins tends to be rubbish. Go for off the shelf system
-
A lot of people say the RSR is great for clearance
-
Blitz sounds more aggresive than a HKS on a TT. Try and bolt this on, you can adjust the sound via 3 buttons : http://www.pauleffmanmusic.com/Instrument/Trumpet.gif
