FOSTA

How would I hook up the vacume for the icv brendon? Cheers

Will this cable do? If not is there a part number so I can order one from Toyota? Celica Gt4 St205 Accelator Cable http://bit.ly/yPvXQs

Ahhh! Ok that makes sence! thanks for clearing that one up

How would I do that then mate? :-/

What is the st205 mate No I havnt looked into moving the power steering pump yet but I'll get round to that soon

Sweet so the icv will be ok if I just put anouther one underneath the plenum and plug the connector plug into that one. Then would I just connect the vacume pipe off the idle control valve into one of the new ports on the top of the plenum? Cheers

Could a mod please move this into the tech section please Thanks ;-)

Hi guys I've had a FFIM made for my NA I'm going to be using the stock throttle body for now but I'm alittle unsure if the flange that has been fitted will work ok with the oem throttle body? the adaptor plate they have fitted! (notice it dose not have the gruve cut out for the oem idle control valve! )But would it be ok if I left the stock icv in place not connected and then fitted another one underneath the FFIM on the new icv plate ? This is my manifold: And this is what it should look like if using the stock icv in place on the throttle body: But I was thinking of fitting my stock icv here to try and hide more wires: Can someone confirm if this will work ok? Cheers ;-)

Looking good mate!

Mate them pics are mint! What Camara you using?

If it is this is the one I bought http://item.mobileweb.ebay.com/viewitem?itemId=120741658680&cmd=VIDESC&index=4&nav=SEARCH&nid=47603993430

Is it the extension harness, so you don't cut into your factory harness? If so I'll check my eBay to see if I still have the link as I bought one not that long ago

Sweet mate! Fantastic pics mate Here is a cupple ahamilton sent me:

Not a problem mate! We can do it again anytime! And thanks;)

Canny turnout today! And Fantastic bunch of lads we had a right laff! Got a few pics with the iPhone (not good quality!) lol

Nice mate!

Good luck with the build mate! I will be keeping an eye on this one

Ok lads I will be there from 10:30am and I think most of yous will be heading down for around 11am-11:30am I will have the kettle on the ready! So I will see yous then

Looks sweet mate! I need to sort one of my wheels out after a hit a curb

Hmmm I think I'm just going to have to wait and see if the oem one fits with enough room to fit the intercooler piping on. It dosnt look good though as my oem body is 8 inches long :-/

Yeah I thought as much. What size is the one you got on now? And how did you do the throttle sensor on that? Just I've been looking today and I think my oem body is going to be too big and might not fit :-/ Ive found a 80mm weld on plate incase I need one like. Cheers

Hi dose anybody know if there is an aftermarket throttle body that takes the supra throttle position sensor? Hopfully a 80mm but It could be bigger if it had to be. Sorry if this is a stupid question but it's the first time I've thought about changing for an aftermarket body. Thanks

Mate that looks fantastic! It's going to be a very clean and tidy NA-T this one! Well done

Hi mate I have a NA aerotop auto and i think they are fantastic! Nice and responsive! but they could do with a little kick of power that's why I turbod mine so it's NA-T And they are even more fun when the sun is out

Fantastic mate