drew 007

A few parts for the supra I’ve got lying around that I’m never going to use. Item:- I’m thinking of letting my Recaro Raptor seats go to a new home, i had these in my previous car and loved them so much i kept them in the garage with the intensions of putting them in the supra, but the supra came with some already fitted so no need to keep the Raptors really. There extremely comfy and rare seats. They look awesome with the camo pattern which makes a nice difference to the normal Evo/Honda Recaro’s you see. So stand out that bit more from the norm. There fully adjustable with tilt function (so easy to get in the back) there's lumber support via the side pumps, Both work as they should. They have the pull out for the extra leg support. And both have the space underneath for the fan/heated seat option. (No fans) There is a couple of marks to let you know about, One being a small what looks like a burn to the drivers seat smaller then a 5pence piece (see pic) and another mark just up from the burn this may come out with a good clean? Been in the garage a while! The plastic side on the drivers seat looks to have been repaired (see pics) the Plastic has been poorly repaired. Both where done to the seat when i bought them, they have never bothered me as you can’t really see them when in the car. But looking the side plastic could be made to look better. There is no sagging to the seats and all the bolsters are fine with very little ware/use over the whole seats. No harness have ever been used so the middle rubbers are as new. And the plastic behind each seat is in very good condition as rarely had back seat passengers. The seats would best benefit from a good clean, there not bad but as said I’ve had them in the garage for a while so to get the best from them a good deep clean would be recommend. The seats DO NOT come with seat rails. And i would really prefer pickup, A, so you can see what your buying and B, to eliminate any damage in transit. Collection From:- Sheffield. Many thanks, Kind regards. Price is £700.ono Pics. A close up pic of the burn/marks. Close up of the side plastic. Item:- Race logic traction control unit. I bought this item of keron last year (2/5/14) and have only just taken it out of the box to get some pics. Its just been in the box in the spare bedroom ever since buying it. Its the full kit with launch control, Manuel, data cables, and floppy disk is present aswell as the loom for the Toyota supra. Ive never used the item but when i bought it from keron he guaranteed it to be fully working. It cost me £300 in May so i would like to get back as much as possible as I’ve never used it. PS, you must have ABS to enable you to run this unit. Collection From:- Sheffield. Many thanks. kind regards. Price is £250. SOLD Pics. As said above collection is from Sheffield.

Welcome buddy.

Thanks for the pics guys some top notch pics there!! and cars to boot. And I appreciate the comments about mine. Thank guys.

Il take the 2 tickets Paul. But before I pay do you know where we will be parking buddy? Is it grass/Tarmac etc..

Welcome buddy. All the best with the supra.

Congratulations to all involved, what a car!! Nice one kaan, time to enjoy buddy.

Best of luck for tomorrow dude. Hope all go's well.

Sorry to read about your luck with the car buddy hope you manage to get it sorted. But if you do find yourself breaking her I would be interested in the TRD dials and the adjustable suspension depending on condition and price etc mate please. Also the recaro's again pending the condition and price. Kind regards. Drew.

Hi guys, I'm after a little help with the above query. Ive gone to take the starter out today and noticed that a part of the Reas suspension (damper) was in the way, big time. I can't even get to undo the starter cables its that tight. Ive had a search but every starter motor thread all seam to be without the Reas suspension, so I'm hoping somebody with this set up has hit this brick wall before and there is a simply solution. As there is no chance the starter will come out with the damper in place. Pics....

Top man. Really appreciated.

As for just sticking my hand up... There is no chance. Been trying to remove the shi* pan but still can't get to the dam thing. I'm going to try and take the air filter out and see if I can get in that way. As it does look and feel that they just twist and pull out!!

Thats fantastic, thanks for the heads up. so you need to get behind the shi* pans to get to the nuts/bolts.

Hi Guys, I'm needing to change the side indicator bulb on my front bumper.(Facelift supra), But one I'm not sure how to get the repeater off the side of the front bumper, And two, I'm not sure what bulb to get. Im needing this sorted asap as I've got an mot tomorrow and only just seen it. Ive tried just pulling the indicator lense but I'm not convinced thats how you get to the bulb? Ive had a search but can't find any info on how to replace the bulbs. Any info will be really appreciated. Kind regards.

Great addition Ric looks spot on matey. :-)

Looking lovely mate. Fair play..enjoy.

Welcome to the club buddy.

Hi Nic, thanks for the info buddy really appreciated, top man. Il see about placing my order with them sizes. :-) What tyre sizes would you pick with these size wheels please Nic? Sorry buddy.

Ask for the wheel god....and he shall appear... Thanks for the info Nic really appreciated. Ive already been speaking via email buddy and like you say they will make them to the spec i want/need. The trouble is i don't know the spec.

Clean and tidy.

Im going to place my cards on the table..I’ve never got all the ET/OFFSET on wheels. I’ve tried, god I’ve tried..I’ve been on many wheel/tyre calculator sites but still no joy, and now I need help!! I’m looking at placing an order on some new work Meister s1 3p wheels, with them been works they are made to your requirements, that said I’m wanting the best setup for the Supra, as I’ve seen loads of variants fitted to the Supra. Im not wanting to run any spacers and I’m not really wanting much if any arch work done. (Can a 10.5j rear wheel go on with no arch work?) I’m wanting a flush looking setup with no rubbing, but with the biggest dish. I’m not a fan of wheels/tyres that stick out of the arches so will need help/info on the best tyre combo for whatever size wheels I decide to go for. I’m also not a big fan of the stretched tyre look. I’m looking at..Front 18x8.5j Rear 18x10.5j et unsure? this is where the help is needed. What would be the best ET/OFFSET for the above size wheels please guys. Or would you recommend different sizes? I’m still all standard suspension and as said would rather not do any arch work to get them to fit. I’ve got UK brakes so will i need the maximum brake clearance option? - Can anybody advise what clearance the UK brakes require? As I’m not 100% sure on the Ldisk Rdisk Odisk deep rim big calliper options. I’m looking to get everything sorted before I place the order as I would kick myself if when they turn up they don’t fit. Any info would be much appreciated. Thanks guys, Kind regards.

Sorry Shane, I've sent my details buddy. Thanks mate.

I'm working in Glasgow at the mo and would like to meet up before you go on your convoy if poss. I'm 20 mins from the meeting point.

Thanks for that Jim top man. That's that sorted then!! :-) I wonder what supra's drive like on 19"s?

Aaarrr really!! Gutted. I need to know if they clear the uk brakes before I go ordering a set. Thanks for the info really appreciated.

Ok matey thanks for that really appreciated. Yeah, it seems that the et25's are the ones to go for!! Thanks guys and girl.!. :-)