themodifiedkid
-
Posts
979 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by themodifiedkid
-
I no Lurch has some fitted in his car and I'm sure he was talking about selling them when I saw him a few months ago? Maybe worth a pm
-
There is no problem with the MOT mate, I put them in Russ (The Raven) bumper which mirrors the location on my facelift/all facelift front bumpers. For everyone who says you should do that and should do this, this project was done on a shoestring and thats the beauty of it. I no every one has there opinions which they are entitled to but the main aim was to make the customer (The Raven) happy, and he clearly is. Rant over Think i must have got out of bed the wrong side today people sorry The TRD looks good though mate on a positive note
-
Show off No really mate, you have a lot of talent, well done sir
-
There's UK spec, Pre facelift jspec, and facelift jspec!!!, unless i'm wrong:blink:
-
That is fookin mental. Well done lad that looks the absolute dogs :drool:
-
I have a standard set of 16" factory graphite alloys with good tyres, plenty of tread if interested mate?
-
for sale TRD bonnet, UK spec wheels, standard spoiler
themodifiedkid replied to quez's topic in Parts for Sale
pm'd buddy -
Im 99% sure its the alignment of the wheels mate. Ive recently had a wheel alignment done (laser alignment) and it really centralised the steering wheel. It was fine before when i had the stock 16 " wheels on, then when i changed to 18" had same trouble.
-
:rlol:
-
Nice one Ray, mine turned up just before christmas. Looks quality, cheers mate
-
Mines arrived and must say very impressed and would like to thank the guys and gal who has put in the hours to get this done, well worth it, well done people. Top effort
-
Thanks bud. Looks like jons rims are very similar to mine
-
That looks pukka mate, now I wander who could have done all that work
-
1. johnny g (titanium) 2. bradleyh_15 (silver) 3. tooley (silver) 4. L33 (silver) 5. Ricky49 (silver) 6. Suprasplu (silver) 7. wiggy1980 (silver) 8. Scott M (Black) 9. haydn (silver) 10. turnerjr (black) 11. themodifiedkid (black)
-
I got one buddy. It is in mint condition. Well you know that anyway as you've seen it. A little project ive just finished mate which has made this available
-
Yeah i read that when bpu'ing mine but i just put the sensor back in to fill the hole . I know i should have welded it but has hurt blocking it of with the redundant sensor. If i remember rightly I bought mine from a uk ebay seller which made it alot easier and cheaper. By the sound of things I was lucky a jspec one turned up :D
-
TRD oil filler cap for me.
-
I may be shot down in flames but that is a jspec de cat, as I have exact same one on my j spec facelift, (well it looks the same and is the exact same make). That hole is for a sensor, its not lambda sensor but there is another stock sensor and for the life of me i can't remember what its called now.
-
It maybe because you haven't gone deep enough (not taken enough of the tarnished plastic off) When doing numerous headlights i started with 800g, then 1200g, then 1500g. Then compound with g3 paste, then g10 using a polishing machine then polish up. This is the expert advice i got from the supra guru dave (supraloopy) This should now give you crystal clear lenses
-
Honestly it will look ok mate. If you look around the outer edge of the headlight there is a black looking perimeter. If you just follow this exact line with the masking tape and spray it black then no one will be non of the wiser. I would guess that you either had the oven too hot or left them in too long or both!!
-
I can see that slight bubbling on the corner. Best thing to do is sand that down level with the rest of the lens (depending on how proud it is) use a course paper to take the worse out and then fine paper to finish, making sure not to catch the rest of the lens. Then mask out a fine line around the edge of the lens then spray black. (The surrounding edge of supra headlights looks black anyway, so it will not notice). Hope this makes sense, if not pm me and i will try and describe it a bit better
-
I can imaging there would be alot of interest, me being one. What sort of money were you looking for them mate
-
Any chance you have managed to take down the other measurements. Edge of wing to edge of vent, and top of wing to top of vent. If you have had chance then I will guesstimate by eye Thanks matey
-
Ill definatly be up for the £50 one. Ill keep an eye out on this thread and hopefully I will be successful and be added to the list
-
Thanks for taking the trouble to get all this info for me. Very informative Cheers bud
