Guigsy Posted June 8, 2007 Share Posted June 8, 2007 i want facelift Link to comment Share on other sites More sharing options...
Konrad Posted June 8, 2007 Author Share Posted June 8, 2007 i want facelift If someone can donate original auto dacelift dials, I can send them to Poland and make done few auto/manual... Link to comment Share on other sites More sharing options...
Konrad Posted June 8, 2007 Author Share Posted June 8, 2007 My car reads in mph but the dial goes all the way up to 320mph. I have a little "mph" sticker over the bit on the dial where it used to say "kph". I have a Thor delimiter fitted which I want to keep. I'm sure it'll just be a wiring issue to get the speedo reading the right thing. It'll look into it. The light dimmer doesn't affect the brightness of the dials. (It does affect the odometer though). It wouldn't surprise me that the wrong resistors had been fitted though (any ideas what the right one's should be?). The previous owner was a total billy-the-bodger. (Scotchloks, mains wiring, wires twisted together and taped ... oh the list goes on ...) Regardless of all this, I still want my name down for a set of these dials which best suit my car. You should have 390r resistors fitted to blue 5mm leds. Link to comment Share on other sites More sharing options...
Guigsy Posted June 8, 2007 Share Posted June 8, 2007 http://cgi.ebay.co.uk/Toyota-Supra-White-face-Glow-Dials-clocks_W0QQitemZ120126952711QQihZ002QQcategoryZ10428QQssPageNameZWDVWQQrdZ1QQcmdZViewItem but i need some manual ones cant donate min as it a daily driver also Link to comment Share on other sites More sharing options...
Konrad Posted June 8, 2007 Author Share Posted June 8, 2007 http://cgi.ebay.co.uk/Toyota-Supra-White-face-Glow-Dials-clocks_W0QQitemZ120126952711QQihZ002QQcategoryZ10428QQssPageNameZWDVWQQrdZ1QQcmdZViewItem but i need some manual ones cant donate min as it a daily driver also I know about this ebay link, but all seems to forget, that i'm NOT doing any cash out of it I need auto as and example, difference between manu and auto is lack of 12NPD letters and OD/off Anyone around have el-glow/ss facelift dials fitted and do not want original ones? So I could make happy facelift owners too? Link to comment Share on other sites More sharing options...
UltraFlynn Posted June 9, 2007 Share Posted June 9, 2007 You should have 390r resistors fitted to blue 5mm leds. Thanks for the info. Link to comment Share on other sites More sharing options...
turbonut Posted June 13, 2007 Share Posted June 13, 2007 hi hun, I can collect mine 1. Mike M ------- Blue background/Red Rev limit. (manual) 2. Supraloopy----Blue background/Red Rev limit.(Auto) 3. ToyoRob -------Blue Background/Red Rev Limit. (manual) 4. Keron---------Blue Background//Red Rev Limit (manual) 5. Pete_TT ------Blue Background/Red Rev Limit (manual) 6. Ryan.g--------Blue Background/Red Rev Limit (manual) 7. Glosphil -------Blue Background/Red Rev Limit (manual) 8. flukey-lukey---Blue background/red rev limit (auto) 9. Shane --------Blue background/Red Rev limit (Auto) 10. Dean---------Blue Background//Red Rev Limit (manual) 11. jim_supra----Blue Background/Red Rev Limit (Auto) 12. m45sey------blue background/red rev limit (manual) 13. Rays the roof----Blue Background/Red Rev Limit (Auto) 14. evanshaw ---Blue Background/Red Rev Limit (Auto) 15. fatbob --- Blue background/red rev limit (manual) 16 Naybad --- blue background/red rev limit ( manual ) 17. tullyhead ---Blue background/red rev limit (manual) 18. Flynn --Blue background/red rev limit (auto) 19.turbonut---Blue background/red rev limit (manual) Link to comment Share on other sites More sharing options...
Konrad Posted June 13, 2007 Author Share Posted June 13, 2007 Dials supposed to arrive tommorow/Friday. I already prepared backgrounds, so it will be just matter of sanding/polishing/glueing colours Link to comment Share on other sites More sharing options...
Guest rodeo_v8 Posted June 13, 2007 Share Posted June 13, 2007 Dials supposed to arrive tommorow/Friday. I already prepared backgrounds, so it will be just matter of sanding/polishing/glueing colours Hello mate id love to have one set if its not toooo late Blue Background//Red Rev Limit (manual) Link to comment Share on other sites More sharing options...
rovervi Posted June 13, 2007 Share Posted June 13, 2007 I know about this ebay link, but all seems to forget, that i'm NOT doing any cash out of it I need auto as and example, difference between manu and auto is lack of 12NPD letters and OD/off Anyone around have el-glow/ss facelift dials fitted and do not want original ones? So I could make happy facelift owners too? could we post in chat section to see if anyone has some? Link to comment Share on other sites More sharing options...
Konrad Posted June 13, 2007 Author Share Posted June 13, 2007 1. Mike M ------- Blue background/Red Rev limit. (manual) 2. Supraloopy----Blue background/Red Rev limit.(Auto) 3. ToyoRob -------Blue Background/Red Rev Limit. (manual) 4. Keron---------Blue Background//Red Rev Limit (manual) 5. Pete_TT ------Blue Background/Red Rev Limit (manual) 6. Ryan.g--------Blue Background/Red Rev Limit (manual) 7. Glosphil -------Blue Background/Red Rev Limit (manual) 8. flukey-lukey---Blue background/red rev limit (auto) 9. Shane --------Blue background/Red Rev limit (Auto) 10. Dean---------Blue Background//Red Rev Limit (manual) 11. jim_supra----Blue Background/Red Rev Limit (Auto) 12. m45sey------blue background/red rev limit (manual) 13. Rays the roof----Blue Background/Red Rev Limit (Auto) 14. evanshaw ---Blue Background/Red Rev Limit (Auto) 15. fatbob --- Blue background/red rev limit (manual) 16 Naybad --- blue background/red rev limit ( manual ) 17. tullyhead ---Blue background/red rev limit (manual) 18. Flynn --Blue background/red rev limit (auto) 19.turbonut---Blue background/red rev limit (manual) 20. rodeo v8---Blue Background//Red Rev Limit (manual) Link to comment Share on other sites More sharing options...
Konrad Posted June 13, 2007 Author Share Posted June 13, 2007 could we post in chat section to see if anyone has some? Obviously - if there will be someone who can volunteer those - I can return them after project will be made and sample produced. Link to comment Share on other sites More sharing options...
rovervi Posted June 13, 2007 Share Posted June 13, 2007 Obviously - if there will be someone who can volunteer those - I can return them after project will be made and sample produced. nice one mate, i have posted, i just hope someone can help wish i had another car to use and i would send you mine Link to comment Share on other sites More sharing options...
Guest rodeo_v8 Posted June 13, 2007 Share Posted June 13, 2007 whats the ETA on these dials and when do i have to pay u mate ? Link to comment Share on other sites More sharing options...
Konrad Posted June 13, 2007 Author Share Posted June 13, 2007 I will have them tommorow/Friday as I said before, then I will start polishing them - shouldn't be long really - few days at maximum I will collect payments, when I will have dials here physically. Link to comment Share on other sites More sharing options...
Guest rodeo_v8 Posted June 14, 2007 Share Posted June 14, 2007 I will have them tommorow/Friday as I said before, then I will start polishing them - shouldn't be long really - few days at maximum I will collect payments, when I will have dials here physically. Cool , Thanxs[GRIN][/GRIN] Link to comment Share on other sites More sharing options...
Konrad Posted June 15, 2007 Author Share Posted June 15, 2007 Allright ladies and gentelman. Package arrived today, I'm starting polishing from tommorow. I'm accepting paypal, but then you have to add paypal charge which is around 1,50 (Sorry about moving charge onto you, but I'm already on small minus ) I will also accept bank transfer. If you want my account details, please PM me. Mass PM spam sent to interested people. If there will be some late birds for those dials later, PM me and I will see what I can do. Link to comment Share on other sites More sharing options...
Mike M Posted June 15, 2007 Share Posted June 15, 2007 Allright ladies and gentelman. Package arrived today, I'm starting polishing from tommorow. I'm accepting paypal, but then you have to add paypal charge which is around 1,50 (Sorry about moving charge onto you, but I'm already on small minus ) I will also accept bank transfer. If you want my account details, please PM me. Mass PM spam sent to interested people. If there will be some late birds for those dials later, PM me and I will see what I can do. Just payed by paypal mate. Cheers:) Mike Link to comment Share on other sites More sharing options...
jim_supra Posted June 15, 2007 Share Posted June 15, 2007 Payment has been sent. Link to comment Share on other sites More sharing options...
naybad Posted June 15, 2007 Share Posted June 15, 2007 Payment been made to Ur paypal Link to comment Share on other sites More sharing options...
Glosphil Posted June 15, 2007 Share Posted June 15, 2007 Paid - Cheers Link to comment Share on other sites More sharing options...
Guest coldflame Posted June 15, 2007 Share Posted June 15, 2007 payment sent to your paypal cheers Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted June 15, 2007 Share Posted June 15, 2007 Payment sent dude..Thanks. By Paypal Link to comment Share on other sites More sharing options...
Ryan.G Posted June 16, 2007 Share Posted June 16, 2007 Money sent Link to comment Share on other sites More sharing options...
Shane Posted June 16, 2007 Share Posted June 16, 2007 Paid via paypal today. Cheers. Link to comment Share on other sites More sharing options...
Recommended Posts