gregsupra4 Posted October 6, 2006 Share Posted October 6, 2006 Hi all, Due to a heavy work load and a few problems can we ask that all of you who were meeting up here at 9am please make it 10am apart from Wayne as you need to be here at 8am as I have a few things for you to do:d Gaz, the purple thing is full and keeps crying for it's mounting As for the Turbofit car well it is going to be touch and go for running as despite our best efforts the cow just will not rev above 9000rpm with out missfiring so Dan is going to be with us all day and will be doing the final mapping at the POD See you all in the morning. Greg & Sam Link to comment Share on other sites More sharing options...
CJ Posted October 6, 2006 Share Posted October 6, 2006 Good luck Link to comment Share on other sites More sharing options...
Gaz Walker Posted October 6, 2006 Share Posted October 6, 2006 What the hell do you mean above 9k RPM?! Gaz. Link to comment Share on other sites More sharing options...
Homer Posted October 6, 2006 Share Posted October 6, 2006 Good luck with it Greg What the hell do you mean above 9k RPM?! Must be a the new suicide spec I've heard about Link to comment Share on other sites More sharing options...
JamieP Posted October 6, 2006 Share Posted October 6, 2006 Haha... good luck mate... see ya in the morning:) Link to comment Share on other sites More sharing options...
gregsupra4 Posted October 6, 2006 Author Share Posted October 6, 2006 What the hell do you mean above 9k RPM?! Gaz. Was going to 9500 before the cam change now on 272s instead of stocks and the cow wont go up there ?? still this engine is for 1 meet only so if it goes it goes if it blows it blows Looking forward to seeing you Gaz. Link to comment Share on other sites More sharing options...
gregsupra4 Posted October 6, 2006 Author Share Posted October 6, 2006 UPDATE, Had enough and now at home will be back at it in the morning at 7am. Just for information: car is being set up for 2 boost settings, 2 bar for low and 3 bar for high (we will see on the high setting if that 3.2mm head gasket will hold or not . also two NO2 settings 1st 200 hp shot and 2nd 275hp shot:bang: ( This one is for when I come up against KEV ) Cant wait to see how far from the car the rod's will end up bets are on, the longest distance so far is 200 feet, anyone want to take a guess Link to comment Share on other sites More sharing options...
LeeT Posted October 6, 2006 Share Posted October 6, 2006 Was going to 9500 before the cam change now on 272s instead of stocks and the cow wont go up there ?? still this engine is for 1 meet only so if it goes it goes if it blows it blows Looking forward to seeing you Gaz. Should be fun watching this:D Link to comment Share on other sites More sharing options...
JamieP Posted October 6, 2006 Share Posted October 6, 2006 Im looking forward to this:D 3 bar:blink: Link to comment Share on other sites More sharing options...
Marco Posted October 6, 2006 Share Posted October 6, 2006 Make sure you get it on video Link to comment Share on other sites More sharing options...
Gaz Walker Posted October 6, 2006 Share Posted October 6, 2006 Greg, you are a nutter my friend Should be fun though. 3 bar and 9500rpm - thats why the Americans always do well at drag racing Gaz. Link to comment Share on other sites More sharing options...
gregsupra4 Posted October 6, 2006 Author Share Posted October 6, 2006 Im looking forward to this:D 3 bar:blink: If we thought the T88 could give more we would try it, but at the end of the day I do not care about the engine as the new one is going to be built over the winter but I do not want to lose the turbo or inlet, oh F**K it who cares:d Link to comment Share on other sites More sharing options...
GazzaGSi Posted October 6, 2006 Share Posted October 6, 2006 I'll still get down there for around 9 ish. Means I will beat rush hour in the morning and may possibly have chance to give the car abit of clean too! Been pissin down here all week so not had chance. Gaz, the purple thing is full and keeps crying for it's mounting Giiiiiive it to meeeeee Link to comment Share on other sites More sharing options...
JamieP Posted October 6, 2006 Share Posted October 6, 2006 I like your style:D Link to comment Share on other sites More sharing options...
Ian W Posted October 6, 2006 Share Posted October 6, 2006 someone get a vid of this!! Link to comment Share on other sites More sharing options...
Homer Posted October 6, 2006 Share Posted October 6, 2006 Please don't blow it up before Sunday Link to comment Share on other sites More sharing options...
Kranz Posted October 6, 2006 Share Posted October 6, 2006 OMFG is it running stock bottom end?? It'll either pop or fly!! Wish I could see it run. Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted October 6, 2006 Share Posted October 6, 2006 42 PSI???? ha ha ha ha this is gonna be fun..Jamie take a camera..please Link to comment Share on other sites More sharing options...
LeeT Posted October 6, 2006 Share Posted October 6, 2006 42 PSI???? ha ha ha ha this is gonna be fun..Jamie take a camera..please 44.1 to be precise:D I'll have my camera all weekend so will try and get some flying engine debris shots Link to comment Share on other sites More sharing options...
Kranz Posted October 6, 2006 Share Posted October 6, 2006 Has it got a kevlar engine shield fitted.... to catch the flying bits before they go supersonic ?? Link to comment Share on other sites More sharing options...
absz Posted October 6, 2006 Share Posted October 6, 2006 all the best guys and good luck would be great to see that car in the tens:) Link to comment Share on other sites More sharing options...
supradibbs Posted October 6, 2006 Share Posted October 6, 2006 dont blow her up on the sat greg i wanna see you run god luck for tomorrow buddy will see you at the workshop sunday morning Link to comment Share on other sites More sharing options...
MONKEYmark Posted October 6, 2006 Share Posted October 6, 2006 nice to see you going for it.what rubber you running.you should be ok for traction as they prep track lots for busy jap days. good luck Link to comment Share on other sites More sharing options...
JustGav Posted October 6, 2006 Share Posted October 6, 2006 If we thought the T88 could give more we would try it, but at the end of the day I do not care about the engine as the new one is going to be built over the winter but I do not want to lose the turbo or inlet, oh F**K it who cares:d One word.... LUNATIC (but loving it) Link to comment Share on other sites More sharing options...
Bobbeh Posted October 6, 2006 Share Posted October 6, 2006 Have a ball Greg, dont worry about the engine, you have another 4-5 months after this one goes pop before the next season starts Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now