Tyson Posted August 4, 2018 Share Posted August 4, 2018 (edited) I’m going to replace the both brake pipes that run to the rear brakes, front discs and pads. Also looking to swap the clutch master cylinder as it’s leaking. I’ll be getting a garage to do this and was looking at what I should be looking to pay for each fitted. Edited August 4, 2018 by Tyson (see edit history) Link to comment Share on other sites More sharing options...
Frank Bullitt Posted August 4, 2018 Share Posted August 4, 2018 Do you mean approx labour charge? Link to comment Share on other sites More sharing options...
Tyson Posted August 4, 2018 Author Share Posted August 4, 2018 Do you mean approx labour charge? Hi Frank, labour and part cost basically the fitted cost of each thing. Link to comment Share on other sites More sharing options...
Dnk Posted August 4, 2018 Share Posted August 4, 2018 Parts cost will depend what you use and where you get it from, OE from Toyota or other supplier or ebay etc Labour for the lot i'd have thought you'd have it done in 3-4 hrs price depends on who you use, my local is £40 phr to me for cash Link to comment Share on other sites More sharing options...
Tyson Posted August 4, 2018 Author Share Posted August 4, 2018 Oem parts Dunk for all of it. Link to comment Share on other sites More sharing options...
Frank Bullitt Posted August 4, 2018 Share Posted August 4, 2018 (edited) I’d take a gander on Amayama then add on 25% - 50% to get a UK Toyota price! Impex might be worth another try, their prices are sometimes better than Amayama but the down side is that they only accept payment in USD or JPY iirc. Edited August 4, 2018 by Frank Bullitt (see edit history) Link to comment Share on other sites More sharing options...
Dnk Posted August 4, 2018 Share Posted August 4, 2018 Oem parts Dunk for all of it. Call Toyota Mike is the best advice i can give then go from there, i would replace the brake lines with copper to be honest, i bought lines from Toyota and they were bent all over the shop so sent them back. Whifbitz have prices for everything bar the brake lines to give you an idea on price Last price i got from Toyota was £362 for discs and pads front and rear inc vat from Toyota in B'ham Link to comment Share on other sites More sharing options...
Dnk Posted August 4, 2018 Share Posted August 4, 2018 Brake master cylinder is £292 on Amayama + vat & duty + shipping Part number 47201-14780 i got off Toyodiy listed for a 95 6 speed tt european rhd but double check it Link to comment Share on other sites More sharing options...
Tyson Posted August 4, 2018 Author Share Posted August 4, 2018 Sorry dunk I meant clutch master cylinder Link to comment Share on other sites More sharing options...
blythmrk Posted August 4, 2018 Share Posted August 4, 2018 I think you can rebuild the clutch master cylinder. Do you mean the brake pipes front the front to the rear? Link to comment Share on other sites More sharing options...
SupraLEDrears Posted August 4, 2018 Share Posted August 4, 2018 Call Toyota Mike is the best advice i can give then go from there, i would replace the brake lines with copper to be honest, i bought lines from Toyota and they were bent all over the shop so sent them back. Whifbitz have prices for everything bar the brake lines to give you an idea on price Last price i got from Toyota was £362 for discs and pads front and rear inc vat from Toyota in B'ham Copper is the only way. Toyota discontinued them. A guy down south had some new ones for sale on here last week though. Link to comment Share on other sites More sharing options...
blythmrk Posted August 4, 2018 Share Posted August 4, 2018 Copper is the only way. Toyota discontinued them. A guy down south had some new ones for sale on here last week though. I bought a set last year they came the following day from my local Mr t dealer. Link to comment Share on other sites More sharing options...
Tyson Posted August 4, 2018 Author Share Posted August 4, 2018 I bought a set last year they came the following day from my local Mr t dealer. How much did you pay if you don’t mind me asking ? Link to comment Share on other sites More sharing options...
blythmrk Posted August 4, 2018 Share Posted August 4, 2018 I cannot remember I will try and find out the invoice! Link to comment Share on other sites More sharing options...
evinX Posted August 4, 2018 Share Posted August 4, 2018 Isnt Kunifer supposed to be better than copper and never rusts/ easier to bend? Link to comment Share on other sites More sharing options...
SupraLEDrears Posted August 5, 2018 Share Posted August 5, 2018 I bought a set last year they came the following day from my local Mr t dealer. Phoned 3 weeks ago and they couldn't help me unfortunately. Link to comment Share on other sites More sharing options...
Dnk Posted August 5, 2018 Share Posted August 5, 2018 Isnt Kunifer supposed to be better than copper and never rusts/ easier to bend? Kunifer is Copper & Nickel, i read 88 % Copper and is supposed not to work harden as easily as pure Copper Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now