evinX Posted September 11, 2015 Share Posted September 11, 2015 Anyone know where these can be purchased? used to be loads years ago when I just got on the scene from Miami gt. Anyone doing these. Wouldn't mind a set. Link to comment Share on other sites More sharing options...
scott.wild Posted September 11, 2015 Share Posted September 11, 2015 I would quite like a pair of these as well. Link to comment Share on other sites More sharing options...
boostman Posted September 11, 2015 Share Posted September 11, 2015 Look nice, also interested Link to comment Share on other sites More sharing options...
jim Posted September 11, 2015 Share Posted September 11, 2015 May be worth asking Noz to see if it's something he could produce? Link to comment Share on other sites More sharing options...
Noz Posted September 11, 2015 Share Posted September 11, 2015 I had some made, no one seemed interested. I actually struggled to get the single set sold in the end for £55. It's a pain in the ass and no one seemed interested. Unless 10+ people are interested, I won't be picking anything new up. Here's the old information for reference; http://www.mkivsupra.net/vbb/showthread.php?255656-Supra-Stainles-Steel-Door-Sills/page5&highlight=custom+sills Link to comment Share on other sites More sharing options...
evinX Posted September 11, 2015 Author Share Posted September 11, 2015 Im intrested but dont want the cutout logo. Must be etched. Link to comment Share on other sites More sharing options...
scott.wild Posted September 11, 2015 Share Posted September 11, 2015 Etched for me too Link to comment Share on other sites More sharing options...
evinX Posted September 11, 2015 Author Share Posted September 11, 2015 Also I don't like the bent lip, just a flat piece to stick on the oem plastic, with etching and highly polished. Link to comment Share on other sites More sharing options...
kevin smith Posted September 11, 2015 Share Posted September 11, 2015 Me too Link to comment Share on other sites More sharing options...
CASHEYE Posted September 11, 2015 Share Posted September 11, 2015 Just make sure you're wearing undercrackers, lest you beave someone in your short skirts getting out of the car. Link to comment Share on other sites More sharing options...
TBDevelopments Posted September 11, 2015 Share Posted September 11, 2015 Etching might be a little awkward but i could get some mirror stainless laser cut to shape if people really want Tim TBDevelopments Link to comment Share on other sites More sharing options...
evinX Posted September 12, 2015 Author Share Posted September 12, 2015 Etching might be a little awkward but i could get some mirror stainless laser cut to shape if people really want Tim TBDevelopments Might consider this if the price is cheap enough for some cut to shape metal as id have to have it engraved. Link to comment Share on other sites More sharing options...
boostman Posted September 12, 2015 Share Posted September 12, 2015 Might consider this if the price is cheap enough for some cut to shape metal as id have to have it engraved. This sounds good! Gives the option of engraving etc and hopefully at a lower cost! Link to comment Share on other sites More sharing options...
TBDevelopments Posted September 13, 2015 Share Posted September 13, 2015 what sort of price would you be thinking of? I could get them etched with the laser if thats anygood to you Tim TB Developments Link to comment Share on other sites More sharing options...
evinX Posted September 13, 2015 Author Share Posted September 13, 2015 Just the shaped/ cut metal £20 + postage max. With etching, £30-40 + postage max. id be looking to pay £50 delivered as that used to be the average price, there were loads around from different suppliers back in 2005/6. What kind of finish does the etched finish look like with a laser then? Link to comment Share on other sites More sharing options...
Chris6t9 Posted September 14, 2015 Share Posted September 14, 2015 Interested Link to comment Share on other sites More sharing options...
evinX Posted September 25, 2015 Author Share Posted September 25, 2015 Really want a set of these Link to comment Share on other sites More sharing options...
Kendo11 Posted September 25, 2015 Share Posted September 25, 2015 Yeah I'd possibly be interested if the price stays below £50 or so. Link to comment Share on other sites More sharing options...
inazone Posted October 3, 2015 Share Posted October 3, 2015 Yes interested in these. Subscribed. Link to comment Share on other sites More sharing options...
evinX Posted October 29, 2015 Author Share Posted October 29, 2015 Surely if these were being made in 2005 it wouldn't be hard to reproduce. Anyone know of companies who use/cut mirror stainless and do etching?? Link to comment Share on other sites More sharing options...
listy Posted October 30, 2015 Share Posted October 30, 2015 They should be easily reproduced. All they are is a 2mm thick length of stainless steel with an etched logo. I sold mine ages ago to Benjy for about £20 I think. Link to comment Share on other sites More sharing options...
TBDevelopments Posted November 1, 2015 Share Posted November 1, 2015 let me get a template upto my laser cutter and i'll get some prices for you guys. Tim TB Developments Link to comment Share on other sites More sharing options...
evinX Posted November 1, 2015 Author Share Posted November 1, 2015 Nice one. Awaiting pics Link to comment Share on other sites More sharing options...
evinX Posted May 12, 2016 Author Share Posted May 12, 2016 Bumping this, cant anyone make these? reallllly want a set and dont know about having some made...where to start! Who to contact! Link to comment Share on other sites More sharing options...
samm Posted July 9, 2016 Share Posted July 9, 2016 Yes I would like a set of these!! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now