Dnk
-
Posts
20559 -
Joined
-
Days Won
21
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Dnk
-
lol It wouldn't look good at the strip
-
I dont think you'd ever live it down being beaten by diesel 4x4
-
Just too be awkward Fit the sides first to the boot lid but leave them slightly loose then fit the blade, then tighten the sides then tighten the blade.
-
I think my landcruiser would beat that
-
Cam belt is something like 5 years or 60,000 miles
-
If your cutting real c/f pop some glass's on as you really don't want this in your eyes. I speak from a painful personal experience
-
Surprised they haven't been in touch with me yet as i'm skint and really need my car sold. At least when they say TRD kit in the advert it will be correct
-
My monies on the Maserati
-
click on the link in post no 6
-
...................
-
..................
-
....................
-
Eibachs
-
Can you do anything with a 2001 3.0 D4D TDi Colorado, be interested mainly in what the fuel economy could be as its not great on these things.
-
I like it but not keen on the corner of the bumper angling down as it gets to the tyre, be nicer if it was level but other than that looks nice
-
In a word, No
-
Get a boost controller fitted, something like the Blitz SBCiD i think it is, then you will have a boost gauge which is built in to it and also be able to raise the boost if in fact you are below 1.2 bar.
-
Strip it all off and start again is the only fix. The moisture in the primer, paint and or laquer freezes when its cold and expands thus you get the pimples
-
advice on rear toe arm and alignment/handling
Dnk replied to supraGZaerotop's topic in mkiv Technical
A lot of places offer a check for free so well worth doing -
Isn't the 120 amp fuse bolted into the fuse box so you can't just pull it out ? Should be pretty obvious if its blown as its wasted away on the top so this is where it melts and you can see this as it has a clear top. You didn't get the jump leads on backwards did you as this will blow the 120 amp fuse ?
-
If its like the one way valve on the inlet cover on a tt then it could just push into place inside a rubber grommet/seal that fits in the cover
-
Pink door handles
-
Water transfer printing could be the way to go
-
Gates timing belt kit for the NA is £60 on ebay £72 inc the aux belt which unless its been changed i'd do as well.
-
What's the longest road trip you have done in your Single Turbo Supra?
Dnk replied to Brazil's topic in Supra Chat
Read Orangecurry's reply approx half way down the page in this thread on P/H http://www.pistonheads.co.uk/gassing/topic.asp?h=0&f=48&t=615887&i=20
