Jump to content
The mkiv Supra Owners Club

adi2009

Club Members
 View Profile  See their activity

  • Posts

    927

  • Joined

  • Days Won

    3

 Content Type 

Everything posted by adi2009

  1. adi2009
    Thank you, I will take your advice on this and do that. I need to find a set of VB gaskets first!
  2. adi2009
    Unfortunately the Transgo kit did not come with a valve body gasket kit. I live in India and these cars were never sold here so the local dealers cant help me out with this. I always buy all my OEM parts from Amayama. However, this does pose a problem when you dont have a part number or the require item does not appear on the parts diagram. Do you know a Main Dealer in the UK who might be of help?
  3. adi2009
    Hi David, thank you for the reply. I have had a look through your transmission section. I am looking to do the Transgo HD2 reprogramming kit on my Aristo Gen 2 transmission and have been through Amayama and Megazip and have not been able to find a valve body gasket for this vehicle. Hence, I thought I would check with you before actually dismantling the valve body. The last thing I want is to strip it apart and then realise that I cant find a valve body gasket (if I needed one). Any idea what I can do about this?
  4. adi2009
    Are you sure mate?
  5. adi2009
    Hi, Does anyone know where one can find a valve body gasket for the tiptronic autobox from the Aristo (Gen 2)???
  6. adi2009
    David, has anyone been able to find a place that sells a valve body gasket for the Aristo (Gen2) Tiptronic gearbox?
  7. adi2009
    Hi guys, I see a lot of people using Mahle pistons here. I also read that the Mahle's have minimal piston slap which I would prefer. However, I was explicitly told by a vendor from the US that I should use Manley or CP instead for a 1000 hp build. Is there any truth to this or is it bollocks ?
  8. adi2009
    Has anyone on here had any experience with this girdle kit? Any feedback would be much appreciated! https://suprasport.nl/Engine-parts/Toyota/2JZ-G-T-E/Bearings/Suprasport-2JZ-engine-girdle
  9. adi2009
    Hi guys, I am having some issues with my engine wiring harness and would like to get a new one. Unfortunately, they are not available from Toyota anymore. I found this company called Tweakdperformance and they told me that they could build one for me. Has anyone heard of them? good things? bad things?
  10. adi2009
    Hi there, I am looking for the threaded drive rod that connects to the back of the electric seat motor (forward and rear movement on the rails). Please see the picture below to see where this rod connects.
  11. adi2009
    Possibly, I cant seem to get a part number for it.
  12. adi2009
    Guys, any help would be greatly appreciated. THanks
  13. adi2009
    Hi there, Can someone help me figure out what connects to the rear end of the driver's side electric seat motor (forward and rear movement of the seat on the rail). I have looked through the parts diagram but cant seem to see anything.
  14. adi2009
    Great! thanks for that info. Cheers
  15. adi2009
    Great! thanks for that info. Cheers - - - Updated - - - Great! thanks for that info. Cheers
  16. adi2009
    Hello lads! I was just wondering has any one had any rust issues in the fuel tank? Since our cars are getting old now, I was wondering if I should pull the fuel tank out and get the internals coated with POR 15 or something similar.
  17. adi2009
    Can you please PM me your price mate. Cheers
  18. adi2009
    Looking for brand new RHD glass headlights.
  19. adi2009
    Thanks mate! Does anyone in the UK still stock these?
  20. adi2009
    Does anyone have the correct part number for the RHD (right hand drive) Euro spec glass headlights for our cars? Any help would be much appreciated. Cheers
  21. adi2009
    I am looking for the square AC vent which is closer to the centre of the console on the passenger side? Please see the attached image (although the image is a part meant for a left hand drive car).
  22. adi2009
    Found one, thanks!
  23. adi2009
    Looking for the stock abs plastic ECU cover. Please PM if anyone has one available. Cheers
  24. adi2009
    Hello! The remote locking system on my car has not been working for a while now, I think the problem is with the key as it cracked (the plastic bit where the buttons are) a while ago. Is there any way I can replace the key and get the remote locking system working like stock?
  25. adi2009
    Unable to find it on ebay, could you please copy and paste the link. Cheers
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.