Tommyd16
-
Posts
1138 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Tommyd16
-
oil leak! but don't have a clue what gasket it requires??
Tommyd16 replied to dazla100's topic in mkiv Technical
Yh I need to get some huge Allen keys lol -
oil leak! but don't have a clue what gasket it requires??
Tommyd16 replied to dazla100's topic in mkiv Technical
I thought I had an oil leak from here. Changed the o ring and no luck. Turns out my leak is from one of the hex nuts on top -
Is there enough space to get it out though?
-
Can the oil filter bracket be removed from the car and out of the bay without removing the inlet mani?
-
My supra was Scittish at high speeds. I replaced my drop links all round and its 100 times better. Also maybe worth getting 4 wheel alignment sorted?
-
Excellent cheers
-
When replacing oil pressure switch should it have any sealant on it or thread lock etc? As it doesn't have an o ring
-
I know there is a place in Narborough and one in enderby. Only had parts sprayed at the enderby place but they did a job. If you want cheap there is a place on saffron lane but wasn't a great finish on a boot I had sprayed. Colour match was good but had some pitting when looking up close
-
Better picture
-
I've done the same on my car. Can't find a decent aerial though that's really annoying. Now my reception is always crackly. Spent £30 on a blaupunkt windscreen one and that's still crap! What have you gone for?
-
Cheers hopefully get it painted in a couple of months. Yh had to get the grinder out for the drop links! No chance of doing them without it
-
Fitted a RMM style lip and also fitted yellow bilsteins with h&r springs. At the same time I also replaced all the drop links - what a pain in the arse they are!!! I went off the TRD bonnet so got a stock one keron. Starting to come together though I think
-
I'll give it a go tomorow
-
Unbolt it from the hub carrier or body side?
-
Just spent a good few hours replacing my front shocks for bilsteins with lower springs. Only managed one so far! The single hardest thing I've ever done! So has anyone got any tips for the other side? I removed the drop link but I still seemed short on room
-
I think it was the only one. Got lucky. I've seen the same one afew times. Here's the number 131370083037 Maybe you could message the seller to see if he has anymore
-
Never mind. Found one on eBay
-
I would like a pillar mount
-
Anywhere else? No disrespect to Paul, I love Whifbitz but £120 plus delivery seems a lot
-
I'm looking to buy a twin 60mm a pillar gauge holder. Does anyone know a uk supplier that sells them?
-
Probly be easy enough. Just swap someone's standard parts for the single parts. I'm sure a lot of people, including myself would be up for it depending on what current set up you have lol
-
Stuck a new battery in. On idle getting 13.9v and fully loaded with everything on getting 13.5v across the battery. Started it a couple if times and all seems well - fingers crossed. I checked the voltage of the old battery and it was on 8v when I took it out. That was after a half drive on Monday and has been sat since
-
Regulator? Where's that?
-
Would like to know this also. Does anyone the exact wire to tap in to?
-
I'm going to throw a new battery in on Thursday and if that dosent sort it I will take it to a garage to get tested. I have been meaning to get a new alternator anyway because mine doesn't look too brilliant