Colin-mkiv

http://www.ebay.co.uk/itm/LEXUS-IS300-SPORTCROSS-SAT-NAV-AUTO-ONLY-75866-/251044385485?pt=Automobiles_UK&hash=item3a736952cd#ht_500wt_1202 I've always liked these...NA-T conversion?

I like to make enough money to build another car.

candy apple red

i GOT ONE OF THOSE ON THE WAY TOO....

Go on then, I'll have a 1mm igniter plate plz mate

Cheers Nic

Ooooh laa laa!

76mm I think....just measure the inner diameter of the big rubber connectoron the TB mate., you'll also need an intermediate connector to join the 2 bits of pipe. Get a bend that has a connector on it for your small breather tho.....it requires a 6mm silicone hose. I replaced all of my hardened vacuum pipes as well, seemed to make a difference to me but might be psychological/optomistic! haha

Oh....you dead thread resurector you....haha

Cheers Chris.

Hi Julz, welcome along. Can I ask, what cams are you running and have you noticed a definite improvement and at what part of the rev range is the most marked improvement??? fankyou..

From small beginnings mate....hahaha

You'll need to use a 2.5" bore for the exhaust. Buy a universal 45 degree bend and a 30cm straight pipe for your intake. Type Apiro pipe into ebay and a good few come up. you should be able to build a good intake system for about £60 including a filter. I'm taking my cone filter off though as I'm sure i'm suffering from too much warm air from the engine bay getting sucked in, so I'm going with the factory airbox with an aftermarket element and extra intake cut into the side and ducting extra cold air in from the inner wing blanking plate that the TT's use as an intercooler route along with my baffleless pipework and Crankcase breather venting to air via a small filter.

Bossco sold me an aluminium P/S pulley last week and, due to him relocating his screenwasher bottle, he had a spare 'blingy' washer bottle cap hanging around. I was quite taken by his offer to let me have it for nothing! What a thoroughly nice bloke! .....and, what a thoroughly sexy car too. So, cheers Ross, heres to many meetings in random car parks and polishing our shiny bits!!

I'm starting to think we've got a club full of softies here.....lets all meet and have a fight! Rule 1, no-one must talk about mkivsupra.net...hehehe Just another heart warming example of people sharing a common good, now then, where's all my free stuff?? (wink wink)

I honestly dont know mate, but I think either would suit my needs as I have custom pipework anyway so would simply readapt it to suit mate.

I think I just had a little trouser accident..... and dont forget this beast as well!! http://www.mkivsupra.net/vbb/showthread.php?241651-My-Super-Widebody-Aero-VVTi-Turbo-6sp-project

If theres an NA airbox with the slam panel ducting/intake I'll have it off you.

Inbox me your email mate, I'll send a few pics of my red one...

sweeties

Apparently, the gasses given off by that stuff cause serious brain damage, as we can see....... haha

What he said, the guy I used made the recepticle/tank for the chemicals out of stainless steel....after 4 months it ate a hole in it! They had to make a new tank from a different grade and 3 times the thickness. If you were to dip a finger into this stuff, even for a split second, it would remove the skin...no questions asked!

They're ally. You can get them chemically stripped for around a tenner each, then either paint them (cost of paint) or get them powder coated (around £40 each).

The auto boxes are excellent, esp in manu mode.

Hole