devan

tooquicktostop: ok ill check my brake fluid levels asap, dr jekyll: the first thing i did was check the handbrake was down, and the door shut, so that eliminates that, cheers anyway. suprastar: Yeah the light goes off straight away, but like i said ill check for a fault code asap too.

Hi, Just wandering if anybody has had the MIL light come on during hard acceleration, its just started doing it tonight, after no mods to my car or anything, just random. Its an n/a manual 1994. I will check the codes when i get chance, but for now i just wanted to know if anybody has any experience with this. Also noticed that the small light with the (!) in it also comes on, as well as the MIL, is this normal? Btw the light goes off straight after my acceleration. Cheers, Ash.

Sounds gd, could be a future addition. Cheees for the infoo.

Dont suppose TRD produce a front strut brace for the n/a do they? Ive seen the one for the TT.

As in the title, i am after i button blank for the part of the dash were i believe the heated seats and active spoiler buttons go. And also a grab handle. Cheers, Ash.

I just want a blank to put a rocker switch in for my rear fog lights. Aren't they all the same size if i just want a blank?

Dont suppose you have a button blank do you? just one.

My N/a used to do this, and what sorted it for me seems to be that the ECU Output wire was not connected to the ECU on my speedo converter and de-limiter. Seems like it has nothing to do with the idling, but like i said, as soon as i connected it up, it has never idled low again.

Anybody before they go on eBay and stuff?

Ok cheers Dave, Im always catching my sponge on it too lol.

Never really took much notice of this before, but i was bored and just looking around the Supra, when i started to look at the drivers side and passenger side window seals. The top parts seem to stick out from the roof, and dont sit flush, however, they do further on down. Ive added some pics, please let me know if this is normal. Cheers, Ash. The seal i am talking about is the black one running along the side of the roof, i suppose it actually more of a trim, because it stays where it is when the door is open: You can get your finger down between the edge of the roof, and the seal/trim.

They also dont know much about MSN, Ive just been forced to download an update, and its absolute rubbish, ive now uninstalled it and gone back to the classic Windows Messenger lol.

What do you use for the filters? I bought a document wallet made from blue plastic sheet stuff and cut it up and stuck some in, and it makes my clock and odo look good and nice and blue in the day, but they are still greeny coloured at night.

Sounds gd mate lol.

Yeah that could work, im just not sure about room behind the handle though, i had to chip away at the door card to allow the back of the LED in, but i suppose you could always to the same at the bottom.

cheers for the comments, wiggy - i did the LED conversion, im on my ten days off from work, so i thought id give it a go. Mind you, i should be able to do it as im an electrician lol. Scott M - I was thinking this, but if you put it lower down on the front, it will dazzle you or your passenger as the LEDs are really bright, and there is no room to mount it lower down on the back side of it, due to the handle itsself being there.

Here are the pics of the door handles, They do look better in the dark, and they make the whole handle illuminate, something which the camera cant catch. Hope you all like. -------------------------------------------------------------- Also added some pics of my blue and white LED heater conversion. Enjoy.

Yeah i took the +12V supply from the hazard warning light button. I would of connected to the dimmer switch, but its not wired up in my car due to new dials been fitted, and then taken off by me lol.

Kev A and Abz - ill get some pics up. TonyP - lol

Any more going? I also have the screws.

All done and looking good! Had to run a +12V supply wire through the passenger door, and used a -12V supply common from the door lock. Drivers door was easier as i used two wires which are linked to the key hole illumination LED. Ill post up some pics wen i get time, also in the middle of converting my heater cluster to blue and white LEDs, its going ok, but annoying at times lol.

I can imagine they are pretty well stuck in the car, unless you heave them out and break your back in the process lol.

Yeah i have actually put them in my Supra, just for a few days. They are LOOUUDDD as they are right next to your ears! They dont actually fit in the boot, so you have to put the rear seat back down, and they sit perfectly on there.

Im afraid not Jamesy, Kitted out the Supra with some components and im happy with them. Just after some money now lol.

Hmm not sure what you mean?