teddan
-
Posts
321 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by teddan
-
Hmm it is not there... Where does it come out to the engine bay? I have really spent stupid long time to find this one... Thanks guys!
-
Small question. But I can't find where the crank position sensor should connect to the cable loom...daaamit! Where do I find the connection on the loom?
-
Thanks! Awsome!
-
Where do I find that software nic?
-
Thats the part Great nic, It seems much easier to find it when i search in the part number! Great info! will proberly buy it from http://www.toyotapartszone.com/oem/toyota~inlet~water~16321-46050.html Thanks!
-
Cant fint it at Whifbitz. I will check with Steve Manley
-
Hi, I have searched where I can buy a new lower water neck but without any succes. Someone that have any idea where to find it?
-
guys, I really need som help here. I will run on e85 and around 1000bhp. Today my setup looks like this. 2 and AN6(8?)lines goes to the filter and then out in a AN12 hose and just before the fuelraile i split to to 6(8?)an hoses again. Due to it is just regular hoses they are smells heavily and I will change to PTFE hoses instead. But I want also to remove the hoses and filter and have it outside the car. But I cant find a good place for them. How did you do? I need some inspiration here http://i1169.photobucket.com/albums/r518/stankarn/415_zpsb5bb6ddc.jpg
-
I will use my supra for the most of the time just on the streets, of course there will be some drag racing. But then it is no panic to get one. Thanks jamie!
-
As above, At which HP rate will I need a Billet diff cover and a aftermarket propshaft? Thanks!
-
Sometimes I am wondering why some install shit things
-
-
are not my tein na dampers possible to adjust?
-
Spot on! I need it for by drag set up! Thanks for all answers!
-
Hi I need to change my UK spec to J-spec brakes in the rear due to my smaller rims. I have j-spec calipers and disc. Is it bolt on? The disc seems to be different for the centrum bult?
-
Hi, After 20min break in for the new engine my t78 charger looks like this. Seems strange because the oil is pretty dark but the engine oil is new and very clear! Could it be the seal between the shaft and housing that leaks?
-
I know... but all mine are in a bad shape so will purchase new ones, there for I asked if there are upgrades. Better safe then sorry
-
is there any upgraded woodruff key on the market or will stock always do fine? Thanks for answer
-
Regarding the oil filter location I found this, Then my location should be fine? http://mkiv.com/techarticles/greddy_oil_filter_relocation_kit/index.html
-
Thanks!
-
The citroen is totally bizarre and just awful looking at but it is quite nice to lowering it with the hydraulics to get the car on.
-
That would be great, thanks,
-
ooops. Good to know! I will order the ones you wrote. Thanks! Hahaha but if the submarine are spec 180 meters depth by the manufacturer. But the say "please only try 130m", Then it is something fishy
-
Great input! thanks! I will go for billet main caps, upgrade the rod bolts and the cp wrist clips. I have not heard anything that this is necessary to upgrade the clips but I will do it according to your input and it is just a small change. just a little bit strange that the BC not can give me a proper spec that me rods can handle with 625 arp bolts!
-
According to trevor at real street is is not possible to change arp bolts but when I look at BC homepage it looks like it should work. Have you any experience to of the sportman rods? What they will handle after change bolts? as I read it the should be the same spec as BC 625 rods Thanks for the input of the pins! I will order that. I have not heard about before! great! I will change to billet main caps, but when I was on the mpv website this morning and then the MVP Motorsports Engine Girdle pop up, has anyone tried that?
